The Use Of Polymer Materials For Lubrication

Specifically dedicated to polymer and biopolymer systems, Polymer Adhesion, Friction, and Lubrication guides readers to the scratch, wear, and lubrication properties of polymers and the engineering applications, from biomedical research to automotive engineering. Author Hongbo Zeng details different experimental and theoretical methods used to probe static and dynamic properties of polymer materials and biomacromolecular systems. Topics include the use of atomic force microscopy (AFM) to analyze nanotribology, polymer thin films and brushes, nanoparticles, rubber and tire technology, synovial joint lubrication, adhesion in paper products, bioMEMS, and electrorheological fluids.

FROM THE PREFACE The surface modification of polymeric materials has been the object of a large number of investigations, but little attention has been paid to making a polymer surface frictionless or slippery, and lubricating surfaces are practically unmentioned in any books so far published, probably because of the relatively minor importance of polymer friction in industrial applications. A lubricating polymer surface is important, especially in marine and biomedical technologies. For instance, biomaterials to be used for catheterization on the urinary, tracheal, and cardiovascular tracts, or for endoscopy, should have a surface with good handling characteristics when dry and which preferably becomes slippery upon contact with body liquids. Such a low-friction surface must enable easy insertion and removal of the device from a patient. It would further prevent mechanical injury to the mucous membranes and minimize discomfort to the patient. Earlier approaches to providing a low-friction surface were mostly simple applications involving lubricants such as lidocaine jelly, silicone oil, or non-permanent coating with low-friction materials such as polyethylene or fluoroplastics. However, these substances cannot maintain a high degree of slipperiness for the required duration of time, due to the fact that they leach or disperse into the surrounding body fluids. The aim of this book is to describe the principle of lubrication, to outline a variety of methods for attaining a lubricous surface, and to describe the characteristics and properties of such lubricous surfaces. The technology for surface modification of polymers by grafting will find other applications than for lubrication, such as for improvement of the interfacial adhesion in polymer composites.

A method is described whereby self-lubricating 'polymer materials' are used to lubricate a planetary transmission operating under a vacuum of .000001 torricelli. Experiments were performed with the following lubricants: vacuum 'Maslyanit', pure fluoroplast-4, and flurorplast-4 with 30% powdered tin bronze filler. Washers made of these materials were placed between balls rolling on the gear teeth so that the ball surfaces became coated with dry lubricant in the course of meshing. The experimental setup is illustrated and described.

The growing need to find a sustainable, environmentally-friendly replacement for petroleum-based materials is fuelling the development of bio-based polymers from renewable resources. Amongst the most promising of these are vegetable oil-based polymeric materials. Vegetable oil-based polymers provides a comprehensive review of the research in this important field.After an introduction to classification and polymerization, Vegetable oil-based polymers goes on to review the factors involved in polymer biodegradation. The extraction, purification and application of vegetable oils are then explored, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies. The book then reviews polyamides, polyolefins and vegetable oil-based hyperbranched polymers. It concludes with an analysis of vegetable oil-based polymer composites and polymer nanocomposites.Vegetable oil-based polymers is an indispensable guide for all those involved in the research and development of biopolymers as well as the wide range of industries looking for more sustainable polymer materials. Provides a comprehensive review of recent research in the area of vegetable oil-based polymeric materials Discusses vegetable oils and their derivatives, biodegradable polymers and the fundamentals of polymers Explores the extraction, purification and application of vegetable oils, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies

Many key aspects of life are based on naturally occurring polymers, such as polysaccharides, proteins and DNA. Unsurprisingly, their molecular functionalities, macromolecular structures and material properties are providing inspiration for designing new polymeric materials with specific functions, for example, responsive, adaptive and self-healing materials. Bio-inspired Polymers covers all aspects of the subject, ranging from the synthesis of novel polymers, to structure-property relationships, materials with advanced properties and applications of bio-inspired polymers in such diverse fields as drug delivery, tissue engineering, optical materials and lightweight structural materials. Written and edited by leading experts on the topic, the book provides a comprehensive review and essential graduate level text on bio-inspired polymers for biochemists, materials scientists and chemists working in both industry and academia.

Specifically dedicated to polymer and biopolymer systems, Polymer Adhesion, Friction, and Lubrication guides readers to the scratch, wear, and lubrication properties of polymers and the engineering applications, from biomedical research to automotive engineering. Author Hongbo Zeng details different experimental and theoretical methods used to probe static and dynamic properties of polymer materials and biomacromolecular systems. Topics include the use of atomic force microscopy (AFM) to analyze nanotribology, polymer thin films and brushes, nanoparticles, rubber and tire technology, synovial joint lubrication, adhesion in paper products, bioMEMS, and electrorheological fluids.

Friction and Wear in Polymer-Based Materials discusses friction and wear problems in polymer-based materials. The book is organized into three parts. The chapters in Part I cover the basic laws of friction and wear in polymer-based materials. Topics covered include frictional interaction during metal-polymer contact and the influence of operating conditions on wear in polymers. The chapters in Part II discuss the structure and frictional properties of polymer-based materials; the mechanism of frictional transfer when a polymer comes into contact with polymers, metals, and other materials; and controlling the frictional properties of polymer materials. Part III is devoted to applications of polymer-based materials in friction assemblies. It covers composite self-lubricating materials and polymer materials for complexly loaded main friction assemblies. This work may prove useful to specialists interested in the problems of using polymer materials. It also aims to stimulate deeper research into the field of friction and wear in polymer-based materials.

Polymers and polymer composites have been increasinqly used in place of metals for various industries; namely, aerospace, automotive, bio-medical, computer, electrophotography, fiber, and rubber tire. Thus, an understanding of the interactions between polymers and between a polymer and a rigid counterface can enhance the applications of polymers under various environments. In meet ing this need, polymer tribology has evolved to deal with friction, lubrication and wear of polymeric materials and to answer some of the problems related to polymer-polymer interactions or oolymer rigid body interactions. The purpose of this first International Symposium was to introduce advances in studies of polymer friction and wear, especially in Britain and the U.S.S.R. Most earlier studies of the Fifties were stimulated by the growth of rubber tire industries. Continuous research through the Sixties has broadened the base to include other polymers such as nylon, polyolefins, and poly tetra fluoroethylene, or PTFE. However, much of this work was published in engineering or physics journals and rarely in chemistry journals; presumably, the latter have always considered the work to be too applied or too irrelevant. Not until recent years have chemists started to discover words such as tribo-chemistry or mechano chemistry and gradually become aware of an indispensable role in this field of polymer tribology. Thus, we were hoping to bring the technology up to date during this SympOSium, especially to the majority of participants, polymer chemists by training.

Man lubricates mostly with oil. Nature lubricates exclusively with water. Pure water is a poor lubricant, but the addition of proteins, especially glycoproteins, can modify surfaces to make them far more lubricating at slow speeds. Understanding how nature does this, and the physical structures involved, is not only important for the understanding of diseases such as osteoarthritis, but also essential for the successful application of articulating implants, such as hips and knees, as well as the development of medical devices such as catheters and contact lenses. A host of important applications of water-based lubrication are already in place in the personal care and food industries, and further industrial applications of water-based lubrication could have a significant positive impact on the environment.This book is the first of its kind. It brings together the latest research in biological and biomimetic, water-based lubrication and is authored by the world's experts in the field.

This book deals with the new and now-expanding field of friction, wear, and other surface-related mechanical phenomena for polymers. Polymers have been used in various forms such as bulk, films, and composites in applications where their friction, wear resistance, and other surface-related properties have been effectively utilized. There are also many examples in which polymers have performed extremely well, such as in tyres, shoes, brakes, gears, bearings, small moving parts in electronics and MEMS, cosmetics/hair products, and artificial human joints. Around the world, much research is currently being undertaken to develop new polymers, in different forms, for further enhancing tribological performance and for finding novel applications. Keeping in view the importance of tribology of polymers for research and technology as well as the vast literature that is now available in research papers and review articles, this timely book brings together a wealth of research data for an understanding of the basic principles of the subject.