Tackling Optimization Challenges In Industrial Load Control And Full Duplex Radios

In the third part of this dissertation, a novel all-analog RF interference canceler is proposed. Radio self-interference cancellation (SIC) is the fundamental enabler for full-duplex radios. While SIC methods based on baseband digital signal processing and/or beamforming are inadequate, an all-analog method is useful to drastically reduce the self-interference as the first stage of SIC. It is shown that a uniform architecture with uniformly distributed RF attenuators has a performance highly dependent on the carrier frequency. It is also shown that a new architecture with the attenuators distributed in a clustered fashion has important advantages over the uniform architecture. These advantages are shown numerically through random multipath interference channels, number of control bits in step attenuators, attenuation-dependent phases, single and multi-level structures, etc.

A comprehensive overview of the 5G landscape covering technology options, most likely use cases and potential system architectures.

Radio Network Planning and Optimisation for UMTS, Second Edition, is a comprehensive and fully updated introduction to WCDMA radio access technology used in UMTS, featuring new content on key developments. Written by leading experts at Nokia, the first edition quickly established itself as a best-selling and highly respected book on how to dimension, plan and optimise UMTS networks. This valuable text examines current and future radio network management issues and their impact on network performance as well as the relevant capacity and coverage enhancement methods. In addition to coverage of WCDMA radio access technology used in UMTS, and the planning and optimisation of such a system, the service control and management concept in WCDMA and GPRS networks are also introduced. This is an excellent source of information for those considering future cellular networks where Quality of Service (QoS) is of paramount importance. Key features of the Second Edition include: High-Speed Downlink Packet Access (HSDPA) – physical layer, dimensioning and radio resource management Quality of Service (QoS) mechanisms in network for service differentiation Multiple Input – Multiple Output (MIMO) technology Practical network optimisation examples Service optimisation for UMTS and GPRS/EDGE capacity optimisation The ‘hot topic’ of service control and management in WCDMA and GPRS networks, that has evolved since the first edition Companion website includes: Figures Static radio network simulator implemented in MATLAB® This text will have instant appeal to wireless operators and network and terminal manufacturers. It will also be essential reading for undergraduate and postgraduate students, frequency regulation bodies and all those interested in radio network planning and optimisation, particularly RF network systems engineering professionals.

Multiple-input, multiple-output (MIMO), which transmits multiple data streams via multiple antenna elements, is one of the most attractive technologies in the wireless communication field. Its extension, called ‘massive MIMO’ or ‘large-scale MIMO’, in which base station has over one hundred of the antenna elements, is now seen as a promising candidate to realize 5G and beyond, as well as 6G mobile communications. It has been the first decade since its fundamental concept emerged. This Special Issue consists of 19 papers and each of them focuses on a popular topic related to massive MIMO systems, e.g. analog/digital hybrid signal processing, antenna fabrication, and machine learning incorporation. These achievements could boost its realization and deepen the academic and industrial knowledge of this field.

Provides a relatively brief introduction to conjugate duality in both finite- and infinite-dimensional problems. An emphasis is placed on the fundamental importance of the concepts of Lagrangian function, saddle-point, and saddle-value. General examples are drawn from nonlinear programming, approximation, stochastic programming, the calculus of variations, and optimal control.

This comprehensive handbook brings together experts who use optimization to solve problems that arise in telecommunications. It is the first book to cover in detail the field of optimization in telecommunications. Recent optimization developments that are frequently applied to telecommunications are covered. The spectrum of topics covered includes planning and design of telecommunication networks, routing, network protection, grooming, restoration, wireless communications, network location and assignment problems, Internet protocol, World Wide Web, and stochastic issues in telecommunications. The book’s objective is to provide a reference tool for the increasing number of scientists and engineers in telecommunications who depend upon optimization.

This informative text/reference presents a detailed review of the state of the art in industrial sensor and control networks. The book examines a broad range of applications, along with their design objectives and technical challenges. The coverage includes fieldbus technologies, wireless communication technologies, network architectures, and resource management and optimization for industrial networks. Discussions are also provided on industrial communication standards for both wired and wireless technologies, as well as for the Industrial Internet of Things (IIoT). Topics and features: describes the FlexRay, CAN, and Modbus fieldbus protocols for industrial control networks, as well as the MIL-STD-1553 standard; proposes a dual fieldbus approach, incorporating both CAN and ModBus fieldbus technologies, for a ship engine distributed control system; reviews a range of industrial wireless sensor network (IWSN) applications, from environmental sensing and condition monitoring, to process automation; examines the wireless networking performance, design requirements, and technical limitations of IWSN applications; presents a survey of IWSN commercial solutions and service providers, and summarizes the emerging trends in this area; discusses the latest technologies and open challenges in realizing the vision of the IIoT, highlighting various applications of the IIoT in industrial domains; introduces a logistics paradigm for adopting IIoT technology on the Physical Internet. This unique work will be of great value to all researchers involved in industrial sensor and control networks, wireless networking, and the Internet of Things.

Industrial revolutions have impacted both, manufacturing and service. From the steam engine to digital automated production, the industrial revolutions have conduced significant changes in operations and supply chain management (SCM) processes. Swift changes in manufacturing and service systems have led to phenomenal improvements in productivity. The fast-paced environment brings new challenges and opportunities for the companies that are associated with the adaptation to the new concepts such as Internet of Things (IoT) and Cyber Physical Systems, artificial intelligence (AI), robotics, cyber security, data analytics, block chain and cloud technology. These emerging technologies facilitated and expedited the birth of Logistics 4.0. Industrial Revolution 4.0 initiatives in SCM has attracted stakeholders’ attentions due to it is ability to empower using a set of technologies together that helps to execute more efficient production and distribution systems. This initiative has been called Logistics 4.0 of the fourth Industrial Revolution in SCM due to its high potential. Connecting entities, machines, physical items and enterprise resources to each other by using sensors, devices and the internet along the supply chains are the main attributes of Logistics 4.0. IoT enables customers to make more suitable and valuable decisions due to the data-driven structure of the Industry 4.0 paradigm. Besides that, the system’s ability of gathering and analyzing information about the environment at any given time and adapting itself to the rapid changes add significant value to the SCM processes. In this peer-reviewed book, experts from all over the world, in the field present a conceptual framework for Logistics 4.0 and provide examples for usage of Industry 4.0 tools in SCM. This book is a work that will be beneficial for both practitioners and students and academicians, as it covers the theoretical framework, on the one hand, and includes examples of practice and real world.

Industrial communications are a multidimensional, occasionally confusing, mixture of fieldbuses, software packages, and media. The intent of this book is to make it all accessible. When industrial controls communication is understood and then installed with forethought and care, network operation can be both beneficial and painless. To that end, the book is designed to speak to you, whether you’re a beginner or interested newbie, the authors guide you through the bus route to communication success. However, this is not a how-to manual. Rather, think of it as a primer laying the groundwork for controls communication design, providing information for the curious to explore and motivation for the dedicated to go further.

Wireless technology is a truly revolutionary paradigm shift, enabling multimedia communications between people and devices from any location. It also underpins exciting applications such as sensor networks, smart homes, telemedicine, and automated highways. This book provides a comprehensive introduction to the underlying theory, design techniques and analytical tools of wireless communications, focusing primarily on the core principles of wireless system design. The book begins with an overview of wireless systems and standards. The characteristics of the wireless channel are then described, including their fundamental capacity limits. Various modulation, coding, and signal processing schemes are then discussed in detail, including state-of-the-art adaptive modulation, multicarrier, spread spectrum, and multiple antenna techniques. The concluding chapters deal with multiuser communications, cellular system design, and ad-hoc network design. Design insights and tradeoffs are emphasized throughout the book. It contains many worked examples, over 200 figures, almost 300 homework exercises, over 700 references, and is an ideal textbook for students.