Selecting Exposure Measures For Predicting Crash Rates On Two Lane Rural Highways

Transport systems are facing an impossible dilemma: satisfy an increasing demand for mobility of people and goods, while decreasing their fossil-energy requirements and preserving the environment. Additionally, transport has an opportunity to evolve in a changing world, with new services, technologies but also new requirements (fast delivery, reliability, improved accessibility). The subject of traffic is organized into two separate but complementary volumes: Volume 3 on Traffic Management and Volume 4 on Traffic Safety. Traffic Safety, Volume 4 of the Research for Innovative Transports Set, presents a collection of updated papers from the TRA 2014 Conference, highlighting the diversity of research in this field. Theoretical chapters and practical case studies address topics such as road safety management and policies, accident analysis and modeling, vulnerable road users' safety, road infrastructure safety, ITS and railway safety.

Examine the Prevalence and Geography of Road CollisionsSpatial Analysis Methods of Road Traffic Collisions centers on the geographical nature of road crashes, and uses spatial methods to provide a greater understanding of the patterns and processes that cause them. Written by internationally known experts in the field of transport geography, the bo

Driver workload increases on horizontal curves due to more complicated navigation compared to navigation on straight roadway sections. Although only a small portion of roadways are horizontal curve sections, approximately 25% of all fatal highway crashes occur at horizontal curve sections. According to the Fatality Analysis Reporting System (FARS) database, fatalities associated with horizontal curves were more than 25% during last years from 2008 to 2014, reinforcing that investigation of horizontal curve crashes and corresponding safety improvements are crucial study topics within the field of transportation safety. Improved safety of horizontal curve sections of rural transportation networks can contribute to reduced crash severities and frequencies. Statistical methods can be utilized to develop crash prediction models in order to estimate crashes at horizontal curves and identify contributing factors to crash occurrences, thereby correlating to the primary objectives of this research project. Primary data analysis for 221 randomly selected horizontal curves on undivided two-lane two-way highways with Poisson regression method revealed that annual average daily traffic (AADT), heavy vehicle percentage, degree of curvature, and difference between posted and advisory speeds affect crash occurrence at horizontal curves. The data, however, were relatively overdispersed, so the negative binomial (NB) regression method was utilized. Results indicated that AADT, heavy vehicle percentage, degree of curvature, and long tangent length significantly affect crash occurrence at horizontal curve sections. A new dataset consisted of geometric and traffic data of 5,334 horizontal curves on the entire state transportation network including undivided and divided highways provided by Kansas Department of Transportation (KDOT) Traffic Safety Section as well as crash data from the Kansas Crash and Analysis Reporting System (KCARS) database were used to analyze the single vehicle (SV) crashes. An R software package was used to write a code and combine required information from aforementioned databases and create the dataset for 5,334 horizontal curves on the entire state transportation network. Eighty percent of crashes including 4,267 horizontal curves were randomly selected for data analysis and remaining 20% horizontal curves (1,067 curves) were used for data validation. Since the results of the Poisson regression model showed overdispersion of crash data and many horizontal curves had zero crashes during the study period from 2010 to 2014, NB, zero-inflated Poisson (ZIP), and zero-inflated negative binomial (ZINB) methods were used for data analysis. Total number of crashes and severe crashes were analyzed with the selected methods. Results of data analysis revealed that AADT, heavy vehicle percentage, curve length, degree of curvature, posted speed, difference between posted and advisory speed, and international roughness index influenced single vehicle crashes at 4,267 randomly selected horizontal curves for data analysis. Also, AADT, degree of curvature, heavy vehicle percentage, posted speed, being a divided roadway, difference between posted and advisory speeds, and shoulder width significantly influenced severe crash occurrence at selected horizontal curves. The goodness-of-fit criteria showed that the ZINB model more accurately predicted crash numbers for all crash groups at the selected horizontal curve sections. A total of 1,067 horizontal curves were used for data validation, and the observed and predicted crashes were compared for all crash groups and data analysis methods. Results of data validation showed that ZINB models for total crashes and severe crashes more accurately predicted crashes at horizontal curves. This study also investigated the effect of speed limit change on horizontal curve crashes on K-5 highway in Leavenworth County, Kansas. A statistical t-test proved that crash data from years 2006 to 2012 showed only significant reduction in equivalent property damage only (EPDO) crash rate for adverse weather condition at 5% significance level due to speed limit reduction in June 2009. However, the changes in vehicles speeds after speed limit change and other information such as changes in surface pavement condition were not available. According to the results of data analysis for 221 selected horizontal curves on undivided two-lane highways, tangent section length significantly influenced total number of crashes. Therefore, providing more information about upcoming changes in horizontal alignment of the roadway via doubling up warning sings, using bigger sings, using materials with higher retroreflectivity, or flashing beacons were recommended for horizontal curves with long tangent section lengths and high number of crashes. Also, presence of rumble strips and wider shoulders significantly and negatively influenced severe SV crashes at horizontal curve sections; therefore, implementing rumble strips and widening shoulders for horizontal curves with high number of severe SV crashes were recommended.

This book is dedicated to research on transportation accidental injury and damage, including the pre-injury and immediate post-injury phases. It also includes studies of human, environmental and vehicular factors influencing the occurrence, type and severity of transportation accidents and injury; the design, implementation and evaluation of countermeasures; biomechanics of impact and human tolerance limits to injury; modelling and statistical analysis of accident data; policy, planning and decision-making in safety and prevention of traffic accidents.

In an increasingly globalised world, despite reductions in costs and time, transportation has become even more important as a facilitator of economic and human interaction; this is reflected in technical advances in transportation systems, increasing interest in how transportation interacts with society and the need to provide novel approaches to understanding its impacts. This has become particularly acute with the impact that Covid-19 has had on transportation across the world, at local, national and international levels. Encyclopedia of Transportation, Seven Volume Set - containing almost 600 articles - brings a cross-cutting and integrated approach to all aspects of transportation from a variety of interdisciplinary fields including engineering, operations research, economics, geography and sociology in order to understand the changes taking place. Emphasising the interaction between these different aspects of research, it offers new solutions to modern-day problems related to transportation. Each of its nine sections is based around familiar themes, but brings together the views of experts from different disciplinary perspectives. Each section is edited by a subject expert who has commissioned articles from a range of authors representing different disciplines, different parts of the world and different social perspectives. The nine sections are structured around the following themes: Transport Modes; Freight Transport and Logistics; Transport Safety and Security; Transport Economics; Traffic Management; Transport Modelling and Data Management; Transport Policy and Planning; Transport Psychology; Sustainability and Health Issues in Transportation. Some articles provide a technical introduction to a topic whilst others provide a bridge between topics or a more future-oriented view of new research areas or challenges. The end result is a reference work that offers researchers and practitioners new approaches, new ways of thinking and novel solutions to problems. All-encompassing and expertly authored, this outstanding reference work will be essential reading for all students and researchers interested in transportation and its global impact in what is a very uncertain world. Provides a forward looking and integrated approach to transportation Updated with future technological impacts, such as self-driving vehicles, cyber-physical systems and big data analytics Includes comprehensive coverage Presents a worldwide approach, including sets of comparative studies and applications