Process Industries Corrosion

"This book was prepared by Task Group T-5A-26, a subcommittee of Unit Committee T-5A on Corrosion in Chemical Processes, which is a subgroup of Group Committee T-5 on Corrosion Problems in the Process Industries"--Foreword.

The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards

A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H

The most up-to-date, comprehensive volume on cathodic protection available The causes and results of corrosion in industrial settings are some of the most important and difficult problems that engineers and scientists face on a daily basis. Coming up with solutions, or not, is often the difference between success and failure, and can have severe economic and environmental consequences. This timely volume covers the state of the art in corrosion chemistry today, for use in industrial applications or as a textbook. Cathodic Protection: Covers the theoretical aspects of cathodic protection and the science of the process Provides practical, workable solutions to the everyday problems that engineers working in the field have with corrosion Is applicable in many different industries, literally anywhere there might be corrosion As a companion to his first book, Corrosion Chemistry, published by Wiley-Scrivener in 2012, Cathodic Protection covers both the theoretical aspects of cathodic protection and the practical applications of the technology. Of use to engineers and scientists across a variety of disciplines and industries, this is the most up-to-date and timely treatment of cathodic protection on the market. Both books together offer the engineer, scientist, or student the most useful guide to corrosion and cathodic protection ever written. Efficient and to the point, these guides are rich in valuable information for the engineer working in the field, the scientist researching this area, or the student hopeful of obtaining a degree in mechanical, petroleum, electrical, process, or chemical engineering. As a reference for the engineer in the field, Cathodic Protection is both a refresher for the veteran on the chemistry of cathodic protection and its uses over a variety of industries. It is the most up-to-date, comprehensive treatment of cathodic protection available, covering the most cutting-edge new processes and theories. For the freshman engineer just entering the field, it is a tremendous introduction to this science. As a textbook, it can be used for a single-semester technical course in undergraduate or postgraduate education for disciplines such as chemistry, chemical engineering, petroleum engineering, civil engineering, material engineering, mechanical engineering, metallurgical engineering, mining engineering, agricultural engineering, and other related technical fields.

Safety in the Process Industries tackles safety issues concerning the process industry. The book covers the various hazards, policies, and safety measures in the process industry. The first part of the text presents policies and case histories. Part II discusses the various hazards present in the process industry, such as electrical, fire, explosives, corrosive chemicals, and hardware. Part III tackles hazard control in design and maintenance. Part IV deals with other related topics that concern safety, such as management, safety training, and emergency planning. The book will be of great help to individuals involved in the management, development, planning, design, construction, operation, inspection, and maintenance of a process plant.

Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.