Lifetime Controlling Defects In Tool Steels

In this thesis Christian Sohar describes his investigation into the gigacycle fatigue behavior of tool steels. In an interdisciplinary approach he uses knowledge and methods from a wide variety of disciplines including materials science, metallurgy, chemistry, physics and mechanical engineering. Christian gives a general introduction into steel tools and fatigue in materials. Later he extensively discusses the experimental techniques and results. Indeed it is the detail of the content in this thesis which makes it an invaluable resource for students entering the field and scientists working in related disciplines. Overall, the thesis helps us understand more about the mechanical behavior of metallic materials with complex microstructure and high hardness.

Selective laser melting (SLM) has established itself as the most prominent additive manufacturing (AM) process for metallic structures in aerospace, automotive and medical industries. For a reliable employment of this process, it has to conform to the demanding requirements of these industries in terms of quasistatic and, especially, fatigue performance. Shafaqat Siddique identifies the influence of SLM processing conditions on the microstructural features, and their corresponding influence on the mechanical behavior of the processed AlSi12 alloy structures. The author also gives insight into integrated manufacturing by combining conventional and SLM processes to get the synergic benefits. Requirements for fatigue-resistant designs in additive manufacturing are highlighted, and a novel method is developed for agile fatigue life prediction. About the Author Shafaqat Siddique worked as Scientific Assistant at TU Dortmund University, Department of Materials Test Engineering (WPT), headed by Prof. Dr.-Ing. Frank Walther, and completed his Ph.D. research in cooperation with Laser Zentrum Nord (LZN) in Hamburg. He continues his post-doctoral research at TU Dortmund University, Germany.

Ferrous powder metallurgy (PM) makes up the majority of powder metallurgy products with regard to tonnage. Improving performance is the main trend for pressed and sintered parts, in particular the introduction of cost-effective alloy elements such as Cr and Mn. Furthermore, much can be gained in ferrous PM by elaborate secondary operations. In metal injection moulding (MIM) products, there is a clear trend towards increasingly complex shapes and microsized parts. PM tool steels offer a much finer and fully isotropic microstructure compared to their wrought counterparts and the carbide content may be much higher, resulting in excellent application properties.

Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

For tool designers, tool and die makers, machinists, and apprentices, Szumera presents specification, heat treatments, applications for all types of die and mold steels, and suggestions on how to prepare steels for machining and heat treatment. He does not provide a bibliography. Annotation (c) Boo

The first International Conference on Ageing Studies and Lifetime Extension of Materials was held on th July 12-14 , 1999 at St. Catherine's College, Oxford, United Kingdom. Over 230 delegates attended during the three days and heard nearly ninety papers, together with over thirty poster presentations. Sixteen of these papers were keynotes from invited speakers eminent in their field of research. The proceedings were organised into six separate sessions: observation and understanding of real-time and accelerated ageing; experimental techniques; modelling and theoretical studies; lifetime prediction and validation; lifetime extension; and material design for ageing. In doing this, it was hoped to cover most issues of scientific concern inthefield ofmaterials ageing. One important aspect was that the conference did not concentrateon any particular group or type ofmaterial; rather the aim was to attract contributions from workers engaged in ageing studies with as wide a range of materials as possible. In this way, it was hoped that delegates could interactwith and learnfrom those whom they perhapswould not normally come across and that metallurgists could learn from polymer scientists, ceramicists could talk to modellers, and so on, in this important field. A read through the diverse papers contained within these proceedings will confirm that this aim was happily satisfied. Why hold such a meeting? In the modem world, engineered systems are expected to last longer.