Examination Of Molybdenum Disulfide With Leed And Auger Emission Spectroscopy

An investigation was conducted to determine the effect of temperature and composition on alloy softening in group VIA metals Cr, Mo, and W alloyed with Re. Results showed that alloy softening was similar in all three alloy systems occurring at homologous temperatures less than 0.16 and at Re concentrations less than 16 atom percent. Rhenium content required to produce a hardness minimum diminished rapidly in all three systems with increasing test temperature. The similarities in hardness behavior in these three alloy systems suggesat common softening mechanism which may arise from lowering the Peierls stress.

Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.

February issue includes Appendix entitled Directory of United States Government periodicals and subscription publications; September issue includes List of depository libraries; June and December issues include semiannual index.

In the 1970s and the early 1980s there was an enormous volume of research and development into the subject of molybdenum disulphide lubrication, much of which was supported by national governments for the benefit of defence, aviation or space activities. There were already some well-established practical guidelines for deciding when and how to use molybdenum disulphide, but there was still a considerable lack of universally-accepted theoretical understanding of some of the important and fundamental aspects of molybdenum disulphide technology. However, the state of knowledge was growing rapidly. In the past fifteen years the situation with regard to the technology of molybdenum disulphide lubrication has stabilised in many respects, and a measure of consensus has been reached about some of the mechanisms involved. The use of molybdenum disulphide has become routine in some industries, and there are many well-established and reputable commercial products available. Except in the high-technology field of physical deposition techniques, especially sputtering, the output of new research publications has fallen from perhaps two hundred a year in the 1970s to fewer than ten a year in the 1990s. In spite of this maturing of the subject, it is clear that there are still many aspects in which disagreements persist about the mechanisms involved, and which as a result are unclear or misunderstood among current, and perhaps even more importantly, potential users.One of the primary objectives of this book is to analyse the various aspects of molybdenum disulphide lubrication technology about which there are still disagreements or controversy, and to attempt to come to firm conclusions about some of the mechanisms involved. In particular, it will place emphasis on the importance and effects of burnishing and film consolidation.