Electronic Devices And Circuits Laboratory Manual

This is a Electronic Devices and Circuits laboratory Manual, meant for II year Electronics, Electrical engineering students. All the circuits in this book ar tested.

This book is evolved from the experience of the author who taught all lab courses in his three decades of teaching in various universities in India. The objective of this lab manual is to provide information to undergraduate students to practice experiments in electronics laboratories. This book covers 118 experiments for linear/analog integrated circuits lab, communication engineering lab, power electronics lab, microwave lab and optical communication lab. The experiments described in this book enable the students to learn: • Various analog integrated circuits and their functions • Analog and digital communication techniques • Power electronics circuits and their functions • Microwave equipment and components • Optical communication devices This book is intended for the B.Tech students of Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics. It is designed not only for engineering students, but can also be used by BSc/MSc (Physics) and Diploma students. KEY FEATURES • Contains aim, components and equipment required, theory, circuit diagram, pin-outs of active devices, design, tables, graphs, alternate circuits, and troubleshooting techniques for each experiment • Includes viva voce and examination questions with their answers • Provides exposure on various devices TARGET AUDIENCE • B.Tech (Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics) • BSc/MSc (Physics) • Diploma (Engineering)

This lab manual accompanies Electronic Devices and Circuits, 4/e.

The emphasis is first on understanding the characteristics of basic circuits including resistors, capacitors, diodes, and bipolar and field effect transistors. The readers then use this understanding to construct more complex circuits such as power supplies, differential amplifiers, tuned circuit amplifiers, a transistor curve tracer, and a digital voltmeter. In addition, readers are exposed to special topics of current interest, such as the propagation and detection of signals through fiber optics, the use of Van der Pauw patterns for precise linewidth measurements, and high gain amplifiers based on active loads. KEY TOPICS: Chapter topics include Thevenin's Theorem; Resistive Voltage Division; Silicon Diodes; Resistor Capacitor Circuits; Half Wave Rectifiers; DC Power Supplies; Diode Applications; Bipolar Transistors; Field Effect Transistors; Characterization of Op-Amp Circuits; Transistor Curve Tracer; Introduction to PSPICE and AC Voltage Dividers; Characterization and Design of Emitter and Source Followers; Characterization and Design of an AC Variable Gain Amplifier; Design of Test Circuits for BJT's and FET's and Design of FET Ring Oscillators; Design and Characterization of Emitter Coupled Transistor Pairs; Tuned Amplifier and Oscillator; Design of Am Radio Frequency Transmitter and Receiver; Design of Oscillators Using Op-Amps; Current Mirrors and Active Loads; Sheet Resistance; Design of Analog Fiber Optic Transmission System; Digital Voltmeter.

The laboratory investigations in this manual are designed to demonstrate the theoretical principles set out in the book Fundamentals of Electronic Devices and Circuits, 5/e. A total of 43 laboratory investigations are offered, involving the construction and testing of the circuits discussed in the textbook. Each investigation can normally be completed within a two-hour period. The procedures contain some references to the textbook; however, all necessary circuit and connection diagrams are provided in the manual so that investigations can also be preformed without the textbook.

Written by an award-winning educator and researcher, the sixteen experiments in this book have been extensively class-tested and fine-tuned. This lab manual, like no other, provides an exciting, active exploration of concepts and measurements and encourages students to tinker, experiment, and become creative on their own. This benefits their further study and subsequent professional work. The manual includes self-contained background for all electronics experiments, so that the lab can be run concurrently with any circuits or electronics course, at any level. It uses circuits in real applications which students can relate to, in order to motivate them and convince them that what they learn is for real. As a result, the material is not only made interesting, but helps motivate further study in circuits, electronics, communications and semiconductor devices. EXTENSIVE INSTRUCTOR RESOURCES: * Putting the Lab Together is an extensive resource for instructors who are considering starting a lab based on this book. Includes an overview of a typical lab station, suggestions for choosing measurement equipment, equipment list with relevant information, and detailed information on parts required. This resource is openly available. * Instructor's Manual includes hints for choosing lab TAs, hints on how to run the lab experiments, guidelines for shortening or combining experiments, answers to experiment questions, and suggestions for projects and exams. This manual is available to instructors who adopt the book.

Industrial Electronics is a branch of electronics, which is used for industrial applications. It plays a crucial role in the efficient and smooth operation of manufacturing facilities and industrial processes. This book introduces the commonly used building blocks in industrial electronics. The reader learns which circuit can be used for which application. It is suitable as a laboratory manual for courses like: industrial electronics or power electronics.