Electrical Properties Of Sputtered Aluminum Oxide Films

The physical and electrical properties of aluminum oxide films deposited on silicon by rf sputtering from an alumina target in an argon atmosphere were investigated as a function of sputtering power density in the range from 0.5 to 3 W/sq cm. The deposition rates ranged from 20 to 80 A/min. The density, index of refraction, and dielectric constant of the films increased while the etch rate decreased with increasing power density. The surface charge at the aluminum oxide-silicon interface was typically larger than 10 to the 12th. This charge increased with increasing sputtering power density and could be reduced to 7-8 x 10 to the 11th e/sq cm by annealing. The films exhibited trapping instabilities at room temperature but no polarization was observed under biastemperature stress. The characteristics of composite layers of thermally grown silicon dioxide and sputtered aluminum oxide layers on silicon were also investigated and found to exhibit low surface charge densities, no hysteresis, and a 'contact potential' as well as charge stored at the interface between the two insulators. (Author).

The report consists of a literature survey on the electrical properties of alumina and aluminum oxide thin films. A bibliographic listing of reports is included along with abstracts from most of them.

An important resource for students, engineers and researchers working in the area of thin film deposition using physical vapor deposition (e.g. sputtering) for semiconductor, liquid crystal displays, high density recording media and photovoltaic device (e.g. thin film solar cell) manufacturing. This book also reviews microelectronics industry topics such as history of inventions and technology trends, recent developments in sputtering technologies, manufacturing steps that require sputtering of thin films, the properties of thin films and the role of sputtering target performance on overall productivity of various processes. Two unique chapters of this book deal with productivity and troubleshooting issues. The content of the book has been divided into two sections: (a) the first section (Chapter 1 to Chapter 3) has been prepared for the readers from a range of disciplines (e.g. electrical, chemical, chemistry, physics) trying to get an insight into use of sputtered films in various devices (e.g. semiconductor, display, photovoltaic, data storage), basic of sputtering and performance of sputtering target in relation to productivity, and (b) the second section (Chapter 4 to Chapter 8) has been prepared for readers who already have background knowledge of sputter deposition of thin films, materials science principles and interested in the details of sputtering target manufacturing methods, sputtering behavior and thin film properties specific to semiconductor, liquid crystal display, photovoltaic and magnetic data storage applications. In Chapters 5 to 8, a general structure has been used, i.e. a description of the applications of sputtered thin films, sputtering target manufacturing methods (including flow charts), sputtering behavior of targets (e.g. current - voltage relationship, deposition rate) and thin film properties (e.g. microstructure, stresses, electrical properties, in-film particles). While discussing these topics, attempts have been made to include examples from the actual commercial processes to highlight the increased complexity of the commercial processes with the growth of advanced technologies. In addition to personnel working in industry setting, university researchers with advanced knowledge of sputtering would also find discussion of such topics (e.g. attributes of target design, chamber design, target microstructure, sputter surface characteristics, various troubleshooting issues) useful. . Unique coverage of sputtering target manufacturing methods in the light of semiconductor, displays, data storage and photovoltaic industry requirements Practical information on technology trends, role of sputtering and major OEMs Discussion on properties of a wide variety of thin films which include silicides, conductors, diffusion barriers, transparent conducting oxides, magnetic films etc. Practical case-studies on target performance and troubleshooting Essential technological information for students, engineers and scientists working in the semiconductor, display, data storage and photovoltaic industry