Wind Loads On Buildings And Structures

Bridging the gap between wind and structural engineering, Wind Loading of Structures is essential reading for practising civil, structural and mechanical engineers, and graduate students of wind engineering, presenting the principles of wind engineering and providing guidance on the successful design of structures for wind loading by gales, hurricanes, typhoons, thunderstorm downdrafts and tornados.

Authors Coulbourne and Stafford provide a comprehensive overview of the wind load provisions in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-16, focusing on the provisions that affect the planning, design, and construction of buildings for residential and commercial purposes.

Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.

This book provides comprehensive treatment of wind effects on structures. It starts with the load chain, then moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. Includes the latest information on the Euronorms: Eurocode 1, Actions on Structures. Provides a logical and comprehensive treatment of the basic principles.

Bridging the gap between wind and structural engineering, Wind Loading of Structures demonstrates the application of wind engineering principles to ensure maximum safety in a variety of structures. This book will assist the practising engineer in understanding the principles of wind engineering, and provide guidance on the successful design of structures for wind loading by gales, hurricanes, typhoons, thunderstorm downdrafts and tornados. The principles of meteorology, statistics and probability, aerodynamics and structural dynamics are covered in the first half of the book. The second half describes, qualitatively and quantitatively, the nature of wind loads on all types of structures, including low-rise and tall buildings, large stadium roofs, towers and chimneys, bridges, transmission lines, free-standing walls and roofs, and antennae. Special features include coverage of extreme winds in tropical and sub-tropical climates, wind-tunnel testing techniques, a summary of the wind climates of over sixty countries, and detailed coverage of internal as well as external wind pressures on buildings. A comparison is made of the provisions for wind loads in six major national and international codes and standards. Examples and case studies are given in each chapter that make the book suitable for supporting university graduate courses in wind loading and response.

Standard ASCE/SEI 7-22 provides requirements for general structural design and includes means for determining various loads and their combinations, which are suitable for inclusion in building codes and other documents.

MOP 67 provides guidelines to assist architects and engineers involved with wind tunnel model testing of buildings and structures.

This report provides state-of-the-practice guidelines for the computation of wind-induced forces on industrial facilities with structural features outside the scope of current codes and standards.

Mehta and Coulbourne explain the wind load provisions of Standard ASCE/SEI 7-10 as they affect the planning, design, and construction of buildings for residential and commercial purposes.

Expert coverage of ASCE 7-16–compliant, wind-resistant engineering methods for safer, sounder low-rise and standard multi-story buildingsUsing the hands-on information contained in this comprehensive engineering guide you will be able to design and construct safer buildings that will better withstand extreme wind forces. Written by a recognized structural design expert, the book explains the general concepts and principles involved in the design of buildings and structures for wind forces. Structural systems used to resist wind forces are outlined and explained, in the context of both low-rise and high-rise buildings. Building Design for Wind Forces provides easy-to-follow summaries of complex ASCE 7-16 wind load provisions and shows how to apply the corresponding design procedures using practical examples. A detailed discussion of typical structural damage caused by extreme wind events such as hurricanes and tornadoes is presented along with design recommendations. Current wind engineering activities and recent research developments are discussed, and a general overview of wind tunnel procedures and an introduction to the concept of database-assisted design (DAD) is provided. Building Design for Wind Forces covers:•Wind forces and wind effects on buildings and structures•Wind load provisions of the ASCE 7-16 standard•Damage to structures caused by extreme wind events•Wind engineering activities and research trends•Structural systems for lateral loads•Tall buildings•Wind design procedures and wind load parameters•Wind loads on the Main Wind Force Resisting System (MWFRS)•Wind loads on Components and Cladding (C&C)•Wind loads on building appurtenances and other structures•Wind tunnels and the wind tunnel procedure•Database-assisted design (DAD)