Ultrasonic Vibration Assisted Similitude Of Metal Forming Processes

This Special Issue scrutinizes the use of ultrasonic-cavitation melt treatment in technology of high-quality metallic alloys with improved mechanical properties, and assesses the driving mechanisms of cavitation-induced effects, such as grain refinement, degassing, wetting, and particle distribution. In this context, the research published in this Special Issue considers the interaction between the cavitation field and acoustic streaming with the melt flow and the suspended solid/liquid phases, the characterization and mapping of cavitation activity in a melt volume, and the possibility of achieving high efficiency in processing large melt volumes through technological approaches for the commercial implementation of ultrasonic processing technology.

- Overview of materials and treatment aspects of manufacturability of sheet metal - Written by an industrial expert turned scientist - Concentrates on the formability of sheet metal, one of the fundamental form material is used in metalworking

On June 21 a symposium was sponsored by the Bureau of Naval Weapons on the application of ultrasonic energy in the deformation of metals. At this session, a number of investigators actively working in the field reported informally on the results of their research. The reports revealed that the results achieved by incorporating ultrasonic transducers into conventional metalforming and-cutting operations are sufficiently promising that the technique merits further attention. Data are available to indicate that application of ultrasonic vibrations during metal working can increase speeds, lower forces, and improve surface finishes. All of these results have been obtained without any observed difference in properties between ultrasonically and conventionally fabricated parts. (Author).

This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

The industrial interest in ultrasonic processing has revived during recent years because ultrasonic technology may represent a flexible “green alternative for more energy efficient processes. A challenge in the application of high-intensity ultrasound to industrial processing is the design and development of specific power ultrasonic systems for large scale operation. In the area of ultrasonic processing in fluid and multiphase media the development of a new family of power generators with extensive radiating surfaces has significantly contributed to the implementation at industrial scale of several applications in sectors such as the food industry, environment, and manufacturing. Part one covers fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. It also discusses the materials and designs of power ultrasonic transducers and devices. Part two looks at applications of high power ultrasound in materials engineering and mechanical engineering, food processing technology, environmental monitoring and remediation and industrial and chemical processing (including pharmaceuticals), medicine and biotechnology. Covers the fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. Discusses the materials and designs of power ultrasonic transducers and devices. Considers state-of-the-art power sonic applications across a wide range of industries.

This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.