Tribocorrosion

Tribocorrosion: Fundamentals, Methods, and Materials provides a balanced coverage of recent advancements in both experimental and computational areas of tribocorrosion, covering the basic concepts of tribology and electrochemistry, as well as testing set-ups, protocols, electrochemical methods, and more. It outlines experimental methods, demonstrating the different effects of material loss due to mechanical and electrochemical actions and looks at their effects in applied automotive, aerospace and biomedical settings. Standard testing protocols, tribocorrosion mechanisms in sliding contacts, and modeling and simulation techniques are all covered at length, as is bio-tribocorrosion and the best ways to prevent it. Provides a complete overview of tribocorrosion testing, experimentation and modeling methods that in turn empower safer, environmentally-friendlier and cost-saving applications Balances experimental and computational methods, thus encouraging readers to define and develop experimental and investigative techniques specific to their tribo-system of interest Covers tribocorrosion behavior in passive and non-passive metals and alloys, coatings, modified surfaces, metal matrix composites, and more

This book is a toolbox for identifying and addressing tribocorrosion situations from an engineering point of view. It is an accessible and introductory guideline to the emerging and interdisciplinary field of tribocorrosion covering the main concepts of tribology and corrosion. It describes specific tribocorrosion concepts, models and experimental techniques as well as their application to practical situations in which mechanical and chemical phenomena act simultaneously.

Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials’ properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials’ properties for tribocorrosion systems Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers and medical persons involved with material assemblies subjected to aggressive environmental and mechanical conditions. For academic researchers it is a pertinent tool assisting them in how they can perform a tribocorrosion investigation and obtain results that are correctly interpreted and can be exchanged. Different parts of the book are illustrated with practical examples. This handbook is truly an indispensable guide for every professional who comes into contact with the complex material degradation and protection processes that take place under combined corrosion and wear conditions. Fields of interest include: transportation (aeronautics, maritime, rail, automotive), medical implants (orthopaedics, dentistry), biochemistry, food production, energy production, and machining. The coordination of this handbook writing was done by Professor Jean-Pierre Celis (Katholieke Universiteit Leuven, Belgium) and Professor Pierre Ponthiaux (Ecole Centrale Paris, France) assisted by twelve European experts who contributed jointly to the nine chapters of this handbook. Main topics dealt with are tribocorrosion phenomena in medical and industrial sectors, depassivation and repassivation phenomena, impact on synergism in tribocorrosion, specific testing techniques, coupling tribology-to-corrosion, design of a testing protocol, and normalisation.

This book focuses on the triboemission of low-energy electrons from the freshly generated surface. These electrons play the most crucial role in the chemical reactions at the tribological interface. New models and TIP (thermodymanics of irreversible processes) describe in detail the behavior of emitted electrons which lower the activation energy of the chemical reactions. This book also highlights tribocatalysis phenomena as examples of the lowering of the activation energy. A book titled Tribocatalysis has never been published before this.

During the last few years, tribocorrosion evaluation of artificial joints has become an attractive research area for biomedical scientists and medical professionals. This particular field of study deals with a complex artificial human joint system and many unknown parameters. In this chapter an attempt is made through the perspective of a clinician to bring some insights into this area of research. This chapter addresses the basic tribocorrosion aspects of artificial joints and their clinical implications, beginning with clinical problems, cell responses to the presence of metal particles and ions, and evidence of tribocorrosion from retrieved implants. Then comparisons are made between in vivo and in vitro test conditions, and the complex nature of in vivo joint conditions is discussed. Finally, novel case studies (influence of protein and environment, evidence of synergistic interactions between corrosion and wear) on the research of tribocorrosion of metal-on-metal (MoM) hip joints are also included.

During their service life, most biomaterials and medical implants are vulnerable to tribological damage. In addition, the environments in which they are placed are often corrosive. The combination of triobology, corrosion and the biological environment has been named ‘bio-tribocorrosion’. Understanding this complex phenomenon is critical to improving the design and service life of medical implants. This important book reviews recent key research in this area. After an introduction to the topography of bio-tribocorrosion, Part one discusses different types of tribocorrosion including fatigue-corrosion, fretting-corrosion, wear-corrosion and abrasion-corrosion. The book also discusses the prediction of wear in medical devices. Part two looks at biological effects on tribocorrosion processes, including how proteins interact with material surfaces and the evolution of surface changes due to bio-tribocorrosion resulting from biofilms and passive films. Part three reviews the issue of bio-tribocorrosion in clinical practice, including dental applications and joint replacement as well the use of coatings and test methods for bio-tribocorrosion. With its international team of contributors, Bio-tribocorrosion in biomaterials and medical implants is a standard reference for those researching and developing medical devices as well as clinicians in such areas as dentistry and orthopaedic surgery. Reviews recent research in bio-tribocorrosion and its role in improving the design and service life of medical implants Discusses types of bio-tribocorrosion including fatigue and wear corrosion Examines biological effects on bio-tribocorrosion processes including interaction of proteins with metal surfaces

Two materials (one being metal) under slight relative motion in a liquid medium are subjected to fretting corrosion. This chapter is dedicated to studying fretting corrosion of implants. After describing the most significant implants subjected to fretting, fretting corrosion is defined. Fretting corrosion is a particular degradation mechanism; it highlights the key role of passive film, crevice corrosion, etc. For demonstrating the electrochemical effect of the fretting corrosion of metal, some investigations are presented at free corrosion potential and at applied potential to measure the specific current density. Moreover, the role of proteins is investigated because they constitute the biological environment and thus play a significant role in fretting corrosion processes. Finally, results from atomic force microscopy (AFM) show the particular debris, size about 100nm. The problem of debris influence is discussed.

Mechanical and Electro-chemical Interactions under Tribocorrosion: From Measurements to Modelling for Building a Relevant Monitoring Approach looks at progress in the field of tribocorrosion. The work is a result of the efforts of the European tribocorrosion community gathered under the auspices of the European Corrosion Federation (EFC) within WP18 Tribocorrosion. In addition to the handbook, Testing Tribocorrosion of Passivating Materials Supporting Research and industrial Innovation published in 2012, this release describes the latest scientific approaches recognized and validated experimentally to address tribocorrosion. Sections look at the phenomena of coupling through an understanding of the associated mechanisms and how to identify variables. Final sections cover strategies to control and/or extend the life of structures in a multi-process coupling situation and an in-depth description of the current state-of-the-art on modeling approaches of tribocorrosion. Reviews the multidisciplinary basics of tribocorrosion Includes insights into novel experimental approaches Provides insights into advanced modeling techniques of tribocorrosion Looks at the implication of results in the development of the monitoring of tribocorrosion