Theory And Calculation Of Heat Transfer In Furnaces

Theory and Calculation of Heat Transfer in Furnaces covers the heat transfer process in furnaces, how it is related to energy exchange, the characteristics of efficiency, and the cleaning of combustion, providing readers with a comprehensive understanding of the simultaneous physical and chemical processes that occur in boiler combustion, flow, heat transfer, and mass transfer. Covers all the typical boilers with most fuels, as well as the effects of ash deposition and slagging on heat transfer Combines mature and advanced technologies that are easy to understand and apply Describes basic theory with real design that is based on meaningful experimental data

Calculations in Furnace Technology presents the theoretical and practical aspects of furnace technology. This book provides information pertinent to the development, application, and efficiency of furnace technology. Organized into eight chapters, this book begins with an overview of the exothermic reactions that occur when carbon, hydrogen, and sulfur are burned to release the energy available in the fuel. This text then evaluates the efficiencies to measure the quantity of fuel used, of flue gases leaving the plant, of air entering, and the heat lost to the surroundings. Other chapters consider that it is important to determine the amount of carbon discharged with the ashes, the quantity and composition of any tar produced, so that a carbon balance can be applied. The final chapter describes the various reactions within the furnace atmosphere and between charges and atmosphere. This book is a valuable resource for fuel technologists, heating and ventilating engineers, and plant operators.

HMT: The Science & Application of Heat and Mass Transfer: Reports, Reviews & Computer Programs, Volume 2: Flow, Mixing and Heat Transfer in Furnaces is a collection of papers from the First Conference on Mechanical Power Engineering. The title presents experimental and theoretical research in the field of flow, mixing, and heat transfer in furnaces. The experimental papers in the selection include the effect of the exit section geometry and furnace length on mixing in a cold model industrial furnace, as well as the effect of some parameters on the characteristics of heat liberated along a cylindrical reversed flow furnace. The theoretical papers tackle topics such as study of mixing of two coaxial swirling jets in a cold model furnace and numerical computations of turbulent swirling flames in axisymmetric combustors. The book will be of great use to students, researchers, and practitioners of mechanical engineering.

Heat Exchange in Shaft Furnaces focuses on the theory of heat exchanges occurring in the shaft furnace process. It covers the development and research done by experts in the field of physics, chemistry, metallurgy, and engineering. The book contains the exposition of the aspects of the theory of heat exchange in shaft furnaces and draws examples from the field of blast furnace operation. Researches by scientists; laboratory experiments; and practical results derived by workers on blast furnaces in the theory are skillfully synthesized and expounded. Topics on exchange in packed beds; heat transfer in the blast furnace; and the state of the theory of heat transfer in a blast furnace are discussed. Metallurgist, plant researchers, physicists, chemists, and engineers engaged in the design of blast furnaces will find the book invaluable.

This is a useful reference book focusing on state-of-the-art concepts explaining the mechanisms of the process as well as basic engineering methodologies for calculating heat transfer in furnaces firing pulverized coal, gas, and fuel oil. Solving these problems is especially relevant to high reliability and efficiency in furnace chambers. One of the most complex problems in heat transfer analysis is the calculation of heat transfer. That is why this book provides such extensive material on the conditions of combustion, motion of gases and mass transfer when burning different fuels. The accuracy of such data as thermophysical properties of a layer of impurities on waterwall tubes as well as the radiative properties of flame, especially of its solid particles is imperative and therefore studied in this book.

This book provides a much needed and thorough treatment of the heat transfer in agitated disperse systems. It gives predictive equations for the heat transfer in moving beds, bubbling and circulating fluidized beds, pneumatic transport in vertical tubes and particulate fluidized beds. Owing to the many different modes of activation of heat transfer, the basic approach of the book is to provide experimental evidence of the relevance of particle motion to the proximity of solid surfaces for the heat transfer observed. This has been achieved by the evaluation of experiments obtained with a newly developed pulsed light method using luminous particles. Heat Transfer in Fluidized Beds will be of great use to students and researchers involved in heat transfer and thermodynamics.

An Introduction to Heat Transfer Principles and Calculations is an introductory text to the principles and calculations of heat transfer. The theory underlying heat transfer is described, and the principal results and formulae are presented. Available techniques for obtaining rapid, approximate solutions to complicated problems are also considered. This book is comprised of 12 chapters and begins with a brief account of some of the concepts, methods, nomenclature, and other relevant information about heat transfer. The reader is then introduced to radiation, conduction, convection, and boiling and condensation. Problems involving more than one mode of heat transfer are presented. Some of the factors influencing the selection of heat exchangers are also discussed. The remaining chapters focus on mass transfer and its simultaneous occurrence with heat transfer; the air-water vapor system, with emphasis on humidity and enthalpy as well as wet-bulb temperature, adiabatic saturation temperature, cooling by evaporation, drying, and condensation; and physical properties and other information that must be taken into account before any generalized formula for heat or mass transfer can be applied to a specific problem. This monograph will be of value to mechanical engineers, physicists, and mathematicians.

A joint effort of three continents, this book is about rational utilization of the fossil fuels for generation of heat or power. It provides a synthesis of two scientific traditions: the high-performance, but often proprietary, Western designs, and the elaborate national standards based on less advanced Eastern designs; it presents both in the same Western format. It is intended for engineers and advanced undergraduate and graduate students with an interest in steam power plants, burners, or furnaces. The text uses a format of practice based on theory: each chapter begins with an explanation of a process, with basic theory developed from first principles; then empirical relationships are presented and, finally, design methods are explained by worked out examples. It will thus provide researchers with a resource for applications of theory to practice. Plant operators will find solutions to and explanations of many of their daily operational problems. Designers will find this book ready with required data, design methods and equations. Finally, consultants will find it very useful for design evaluation.