The Electric Generators Handbook

Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.

Synchronous Generators, the first of two volumes in the Electric Generators Handbook, offers a thorough introduction to electrical energy and electricity generation, including the basic principles of electric generators. The book devotes a chapter to the most representative prime mover models for transients used in active control of various generators. Then, individual chapters explore large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Discuss high-power wind generators with fewer or no permanent magnets (PMs) Cover PM-assisted DC-excited salient pole synchronous generators Present multiphase synchronous machine inductances via the winding function method Consider the control of autonomous synchronous generators Examine additional optimization design issues Illustrate the optimal design of a large wind generator by the Hooke–Jeeves method Detail the magnetic equivalent circuit population-based optimal design of synchronous generators Address online identification of synchronous generator parameters Explain the small-signal injection online technique Explore line switching (on or off) parameter identification for isolated grids Describe synthetic back-to-back load testing with inverter supply The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Synchronous Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

The modern world hungers for electricity. Traditionally, this hunger was sated with predominantly constant-speed-regulated, synchronous generators. However, new demands require the stable, quick, and efficient delivery and control offered by variable-speed generators. Surveying all of the technologies used to satisfy the world's demand for o

This book is an authoritative reference work covering the range of mechanical and electrical topics embodied in the practical design and application of diesel generating plant.

Surveying the technologies used to satisfy the world's demand for open, efficient, and clean electricity, Synchronous Generators provides an in-depth examination of synchronous generators for both stand-alone and grid-connected applications. Part of The Electric Generators Handbook, Two-Volume Set, this book offers authoritative, tightly focused treatment of the topologies, steady state and transients modeling, performance, control, design, and testing of stand-alone and grid-connected generators in synchronous operation. Synchronous Generators offers a thorough introduction to electrical energy and electricity generation, including the basic principles of electric generators. The book devotes a chapter to the most representative prime mover models for transients used in active control of various generators. Then, individual chapters explore the topologies and steady state of large and medium-power synchronous generators; modeling and transients; control in power systems; design, including simple cases; and testing. Numerous examples, sample results, and illustrations highlight the concepts. The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Synchronous Generators supplies the tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

Variable Speed Generators, the second of two volumes in the Electric Generators Handbook, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. The book delves into the steady state, transients, control, and design of claw-pole-rotor synchronous, induction, permanent-magnet-(PM)-assisted synchronous, and switched reluctance starter alternators for electric hybrid vehicles. It discusses PM synchronous, transverse flux PM, and flux reversal PM generators for low-speed wind and hydro energy conversion. It also explores linear motion alternators for residential and spacecraft applications. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Address the ride-through control of doubly fed induction generators under unbalanced voltage sags Consider the control of stand-alone doubly fed induction generators under unbalanced nonlinear loads Detail a stand-alone squirrel cage induction generator (SCIG) with AC output and a low-rating pulse-width modulated (PWM) converter Present a twin stator winding SCIG with 50 percent rating inverter and diode rectifier, and a dual stator winding induction generator with nested cage rotor Examine interior permanent magnet claw-pole-alternator systems for more vehicle braking energy recuperation, and high power factor Vernier PM generators Depict a PM-assisted reluctance synchronous motor/generator for an electric hybrid vehicle, and a double stator switched reluctance generator with segmented rotor Describe the grid to stand-alone transition motion-sensorless dual-inverter control of permanent magnet synchronous generators with asymmetrical grid voltage sags and harmonics filtering The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Variable Speed Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

Surveying the technologies used to satisfy the world's demand for open, efficient, and clean electricity, Variable Speed Generators provides an in-depth examination of variable-speed generators for both stand-alone and grid-connected applications. Part of The Electric Generators Handbook, Two-Volume Set, this work offers authoritative, tightly focused treatment of the topologies, steady state and transients modeling, performance, control, design, and testing of stand-alone and grid-connected generators operating at variable speeds. Variable Speed Generators thoroughly covers all types of variable-speed generators currently in progress in distributed generation and renewable energy applications around the world. It delves into the steady state, transients, control, and design of claw-pole rotor synchronous, induction, permanent magnet-assisted synchronous, and switched reluctance starter alternators for hybrid-electric vehicles. It also discusses PM synchronous, transverse-flux PM, and flux-reversal PM generators for low-speed wind and hydro energy conversion as well as linear-motion alternators for residential and spacecraft applications. Numerous design and control examples illustrate the discussion. The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Variable Speed Generators supplies the tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

The third edition of Induction Machines Handbook comprises two volumes, Induction Machines Handbook: Steady State Modeling and Performance and Induction Machines Handbook: Transients, Control Principles, Design and Testing. The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion, i-home appliances makes this third edition state of the art tool, conceived with numerous case studies, timely for both Academia and Industry. The first volume offers a thorough treatment of steady state modeling and performance of induction machines, the most used electric motors (generators) in rather constant or variable speed drives for even lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. The second volume presents a practical up to date treatment of intricate issues with induction machine (IM) required for design and testing both in rather constant and variable speed (with power electronics) drives. It contains ready to use in industrial design and testing knowledge with numerous case studies to facilitate thorough assimilation of new knowledge.