Spectral Hp Element Methods For Computational Fluid Dynamics

Revision of: Spectral/hp element methods for CFD. 1999.

This book is an essential reference for anyone interested in the use of spectral/hp element methods in fluid dynamics. It provides a comprehensive introduction to the field together with detailed examples of the methods to the incompressible and compressible Navier-Stokes equations.

This edition includes new material on discontinuous Galerkin methods, non-tensorial nodal spectral element methods in simplex domains, and stabilisation and filtering techniques.

The development of high-order accurate numerical discretization techniques for irregular domains and meshes is often cited as one of the remaining chal lenges facing the field of computational fluid dynamics. In structural me chanics, the advantages of high-order finite element approximation are widely recognized. This is especially true when high-order element approximation is combined with element refinement (h-p refinement). In computational fluid dynamics, high-order discretization methods are infrequently used in the com putation of compressible fluid flow. The hyperbolic nature of the governing equations and the presence of solution discontinuities makes high-order ac curacy difficult to achieve. Consequently, second-order accurate methods are still predominately used in industrial applications even though evidence sug gests that high-order methods may offer a way to significantly improve the resolution and accuracy for these calculations. To address this important topic, a special course was jointly organized by the Applied Vehicle Technology Panel of NATO's Research and Technology Organization (RTO), the von Karman Institute for Fluid Dynamics, and the Numerical Aerospace Simulation Division at the NASA Ames Research Cen ter. The NATO RTO sponsored course entitled "Higher Order Discretization Methods in Computational Fluid Dynamics" was held September 14-18,1998 at the von Karman Institute for Fluid Dynamics in Belgium and September 21-25,1998 at the NASA Ames Research Center in the United States.

Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today’s CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.

This book consists of important contributions by world-renowned experts on adaptive high-order methods in computational fluid dynamics (CFD). It covers several widely used, and still intensively researched methods, including the discontinuous Galerkin, residual distribution, finite volume, differential quadrature, spectral volume, spectral difference, PNPM, and correction procedure via reconstruction methods. The main focus is applications in aerospace engineering, but the book should also be useful in many other engineering disciplines including mechanical, chemical and electrical engineering. Since many of these methods are still evolving, the book will be an excellent reference for researchers and graduate students to gain an understanding of the state of the art and remaining challenges in high-order CFD methods.

This book is concerned with mathematical and numerical methods for compressible flow. It aims to provide the reader with a sufficiently detailed and extensive, mathematically precise, but comprehensible guide, through a wide spectrum of mathematical and computational methods used in Computational Fluid Dynamics (CFD) for the numerical simulation of compressible flow. Up-to-date techniques applied in the numerical solution of inviscid as well as viscous compressible flow on unstructured meshes are explained, thus allowing the simulation of complex three-dimensional technically relevant problems. Among some of the methods addressed are finite volume methods using approximate Riemann solvers, finite element techniques, such as the streamline diffusion and the discontinuous Galerkin methods, and combined finite volume - finite element schemes. The book gives a complex insight into the numerics of compressible flow, covering the development of numerical schemes and their theoretical mathematical analysis, their verification on test problems and use in solving practical engineering problems. The book will be helpful to specialists coming into contact with CFD - pure and applied mathematicians, aerodynamists, engineers, physicists and natural scientists. It will also be suitable for advanced undergraduate, graduate and postgraduate students of mathematics and technical sciences.

Lattice Boltzmann method (LBM) is a relatively new simulation technique for the modeling of complex fluid systems and has attracted interest from researchers in computational physics. Unlike the traditional CFD methods, which solve the conservation equations of macroscopic properties (i.e., mass, momentum, and energy) numerically, LBM models the fluid consisting of fictive particles, and such particles perform consecutive propagation and collision processes over a discrete lattice mesh.This book will cover the fundamental and practical application of LBM. The first part of the book consists of three chapters starting form the theory of LBM, basic models, initial and boundary conditions, theoretical analysis, to improved models. The second part of the book consists of six chapters, address applications of LBM in various aspects of computational fluid dynamic engineering, covering areas, such as thermo-hydrodynamics, compressible flows, multicomponent/multiphase flows, microscale flows, flows in porous media, turbulent flows, and suspensions.With these coverage LBM, the book intended to promote its applications, instead of the traditional computational fluid dynamic method.