Rheologische Messungen An Baustoffen 2019

Rheological measurements help to optimize the robust application of building materials. For the past few years applied rheology has been moving increasingly into the center of attention of the civil engineering society. Advanced testing equipment, intensive research and development work have all helped to deepen the understanding of this field. Last but not least, different conferences, such as the 28th Conference on the Rheology of Building Materials at the OTH, have helped to exchange the findings and establish valuable new contacts. Finding a compromise between rheological theory and its practical application has been the main topic of these 28 conferences. In these proceedings important rheological topics are addressed: specific applications of concrete such as self-compacting concrete, tremie concrete and sprayed concrete and mortar mixes for 3D printing, which all may be classified as self-compacting concretes. The consideration of time- and temperature-dependent changes in workability are essential for a successful application of these materials. Furthermore, the influence of the mixing energy used and the way of casting/spraying is of high importance for the rheological properties. The rheology of other concrete types is drastically changed due to the compaction by vibrators. Concrete rheology is controlled by its paste content and the rheology of the paste. Tests on pastes are easier to perform, as particle migration of aggregates is not present. However, one has to ask whether it is sufficient to use the results from the paste-measurements for the assessment of concrete and how the optimized paste content will be predetermined. The other question is which admixtures or additives may help to improve the very different application processes. Apart from using superplasticizer and stabilizers, entrained air is a powerful tool to influence rheology.

The art of rheological measurements for construction materials was until 50 years ago a totally unknown territory. Even today it is often hard to understand, unless you are an expert in the field. There are many people who buy the costly equipment for rheological measurements. However, they often find after some time that the test set up, numerous influencing factors and the proper interpretation of the results is not that easy to work out. As a consequence this expensive equipment ends up lying in the corners of the labs gathering dust. This conference and workshop on the "Rheology of Building Materials" in Regensburg cannot solve all these problems. It, however, supplies a platform for excellent presentations of recent research work as well as demonstrations of useful equipment and exchange of ideas. The proper workability of materials bound by mineral binders is essential for an economic production and for a perfect performance in hardened state. The papers in these proceedings show examples of enhanced testing and applications. These proceedings address important rheological topics: - Inline control of ready mix concrete - Tests on concrete and mortar for different purposes (e.g. rheology of calcium-sulfoaluminate mortars, of alkali activated binders, of mortars for 3D-printing) - The influence of fibres on injecting mortars - Oscillatory measurements. The papers on mineral materials are enhanced with a special contribution on the behaviour of granular frazil ice. Hopefully, the reader will enjoy these papers and get a lot of inspiration as well as some new ideas for her/his own work.

With HiPerMat 5 on March 11-13, 2020 the 5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials documents the actual state of development of application in the fields of: Material Science and Development, Composite Concrete Materials, Strength and Deformation behaviour of UHPC, Durability and Sustainability of UHPC, Design and Construction with UHPC, Structural Modelling and Optimisation, Lightweight Concrete Structures, High-Precision Manufacturing for Pre-Fabrication, Nanotechnology for Construction Materials, Innovative Applications, Smart Construction Materials, This volume contains the short versions (two pages) of all contributions that have been accepted for publication at HiPerMat 5.

Tagungsband zum 27. Workshop und Kolloquium, "Rheologische Messungen an Baustoffen 2018" 7. und 8. März an der OTH Regensburg Einige Beiträge sind in Englischer Sprache verfasst.

Tagungsband zum 25. Workshop und Kolloquium "Rheologische Messungen an Baustoffen," 2. und 3. Marz an der Ostbayerischen Technischen Hochschule Regensburg"

The book gathers the peer-reviewed contributions presented at the 3rd International Conference on Application of Superabsorbent Polymers (SAP) and Other New Admixtures towards Smart Concrete, held in Skukuza, South Africa, on November 25-27, 2019. It features papers focusing on the behavior of SAP in concrete (in particular the absorption behavior) as well as the effect of SAP on fresh and hardened concrete properties. It also covers topics such as other modern admixtures, in particular rheology-modifying admixtures, including the recently emerging field of bio- or waste-derived admixtures. The conference builds on the experience and summarizes the activities of the RILEM Technical Committee 260-RSC "Recommendations for Use of Superabsorbent Polymers in Concrete Construction" and addresses other prominent research activities in the field of concrete admixtures.

This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.

The book gathers the peer-reviewed contributions presented at the 3rd International Conference on Application of Superabsorbent Polymers (SAP) and Other New Admixtures towards Smart Concrete, held in Skukuza, South Africa, on November 25-27, 2019. It features papers focusing on the behavior of SAP in concrete (in particular the absorption behavior) as well as the effect of SAP on fresh and hardened concrete properties. It also covers topics such as other modern admixtures, in particular rheology-modifying admixtures, including the recently emerging field of bio- or waste-derived admixtures. The conference builds on the experience and summarizes the activities of the RILEM Technical Committee 260-RSC "Recommendations for Use of Superabsorbent Polymers in Concrete Construction" and addresses other prominent research activities in the field of concrete admixtures.

Aimed at students, lecturers, researchers, and policy makers, this work describes current developments and points the way forward for new developments regarding materials in our society and how they relate to sustainability.

Estimating, modelling, controlling and monitoring the flow of concrete is a vital part of the construction process, as the properties of concrete before it has set can have a significant impact on performance. This book provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, the impact of mix design, and casting. Part one begins with two introductory chapters dealing with the rheology and rheometry of complex fluids, followed by chapters that examine specific measurement and testing techniques for concrete. The focus of part two is the impact of mix design on the rheological behaviour of concrete, looking at additives including superplasticizers and viscosity agents. Finally, chapters in part three cover topics related to casting, such as thixotropy and formwork pressure. With its distinguished editor and expert team of contributors, Understanding the rheology of concrete is an essential reference for researchers, materials specifiers, architects and designers in any section of the construction industry that makes use of concrete, and will also benefit graduate and undergraduate students of civil engineering, materials and construction. Provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, casting and the impact of mix design The estimating, modelling, controlling and monitoring of concrete flow is comprehensively discussed Chapters examine specific measurement and testing techniques for concrete, the impact of mix design on the rheological behaviour of concrete, particle packaging and viscosity-enhancing admixtures