Radio Interface System Planning For Gsm Gprs Umts

This broadly applicable book introduces radio system planning, emphasizing theoretical and practical details for the planning of GSM, GPRS and UMTS mobile networks. It explains the key planning parameters for these systems and describes the common tasks in radio system planning.

GSM, GPRS and EDGE Performance - Second Edition provides a complete overview of the entire GSM system. GSM (Global System for Mobile Communications) is the digital transmission technique widely adopted in Europe and supported in North America. It features comprehensive descriptions of GSM’s main evolutionary milestones - GPRS, (General Packet Radio Services) is a packet-based wireless communication service that promises data rates from 56 up to 114 Kbps and continuous connection to the Internet for mobile phone and computer users. AMR and EDGE (Enhanced Data GSM Environment), and such developments have now positioned GERAN (GSM/EDGE Radio Access Network) as a full 3G radio standard. The radio network performance and capabilities of GSM, GPRS, AMR and EDGE solutions are studied in-depth by using revealing simulations and field trials. Cellular operators must now roll out new 3G technologies capable of delivering wireless Internet based multimedia services in a competitive and cost-effective way and this volume, divided into three parts, helps to explain how: 1. Provides an introduction to the complete evolution of GSM towards a radio access network that efficiently supports UMTS services (GERAN). 2. Features a comprehensive study of system performance with simulations and field trials. Covers all the major features such as basic GSM, GPRS, EDGE and AMR and the full capability of the GERAN radio interface for 3G service support is envisaged. 3. Discusses different 3G radio technologies and the position of GERAN within such technologies. Featuring fully revised and updated chapters throughout, the second edition contains 90 pages of new material and features the following new sections, enabling this reference to remain as a leading text in the area: Expanded material on GPRS Includes IMS architecture (Rel’5) and GERAN (Rel’6) features Presents field trial results for AMR and narrowband Provides EGPRS deployment guidelines Features a new chapter on Service Performance An invaluable reference for Engineering Professionals, Research and Development Engineers, Business Development Managers, Technical Managers and Technical Specialists working for cellular operators

This broadly applicable book introduces radio system planning, emphasizing theoretical and practical details for the planning of GSM, GPRS and UMTS mobile networks. It explains the key planning parameters for these systems and describes the common tasks in radio system planning.

Mobile wireless applications are a good way to increase productivity, improve customer service and streamline business processes. 3G mobile applications, however, bring a unique challenge: ensuring adequate in-building coverage. Indoor Radio Planning provides an overview of mobile networks systems and coverage solutions for cellular networks in buildings. The background of GSM, UMTS and HSPA cellular systems technology are presented and form the backdrop of the main discussion as to why indoor coverage is needed and how it is best implemented. Basic passive distributed antenna systems (DAS) through to advanced fiber optic systems are discussed in detail, giving the reader a good understanding of all the available solutions. In addition, there is a section covering multi-operator systems, as this is becoming a more and more utilized approach. Other sections cover aspects such as how to upgrade passive DAS from 2G to 3G, noise analysis, link budgets, traffic calculations and software tools that can be used to provide help with creating in-building designs. These topics are examined at length from the basic considerations to advanced indoor radio planning. One of the first texts dedicated solely to indoor radio planning, it will be of essential reading to engineering and planning personnel working for mobile operators, with the book being written with radio planners in mind throughout. Indoor Radio Planning will also be of interest to companies who service and manufacture equipment for operators such as suppliers of indoor coverage systems and vendors of base stations for mobile coverage. A unique, single-source reference for both the theoretical and practical knowledge behind indoor radio planning Written by a leading practitioner in the field with more than 15 years of experience Based on real life examples and implemented systems and results Analyzes co-existence of mobile services and inter modulation analysis Outlines the key parameters and metrics for designing DAS for GSM, DCS, UMTS and HSPA

Radio Network Planning and Optimisation for UMTS comprehensively explains how to dimension, plan and optimise UMTS (Universal Mobile Telecommunications System) networks. It introduces the properties of the spread spectrum system and provides a general overview of the physical layer of UTRA FDD. The radio network planning process for WCDMA is clearly presented and detailed information on how to dimension, plan and rollout a 3G network, both theoretically and practically is provided. This valuable text examines current and future radio network management issues and their impact on network performance as well as the relevant capacity and coverage enhancement methods. * Includes automation examples of radio resource management * Focuses on UTRA FDD and introduces UTRA TDD, GPRS and EDGE and examines their interaction and synergy * Provides an excellent source of information for those considering future cellular networks where Quality of Service (QoS) is of paramount importance * Analyses the radio network planning challenges and opportunities for both greenfield and existing operators * Includes an accompanying CD-ROM featuring a static radio network simulator implemented in MATLAB(r) Authoritative and instructive, this text will have instant appeal to wireless operators and network and terminal manufacturers. It will also be essential reading for university students, frequency regulation bodies and everyone interested in radio network planning and optimisation, especially RF network systems engineering professionals.

Why is high performance indoor wireless service needed, and how is it best implemented? As the challenge of providing better service and higher data speeds and quality for mobile applications intensifies, ensuring adequate in-building and tunnel coverage and capacity is increasingly important. A unique, single-source reference on the theoretical and practical knowledge behind indoor and tunnel radio planning, this book provides a detailed overview of mobile networks systems, coverage and capacity solutions with 2G, 3G and 4G cellular system technologies as a backdrop.

In cellular networks, a new generation of CDMA or WCDMA-based networks will start operations in most countries in the near future. The standardized WCDMA technology generates new challenges in radio network planning, optimization and QoS management because of the dynamic nature of its radio interface and various new services and different network operating modes. Moreover, new and modified radio planning phases as well as new field measurements and emphasized QoS management are needed when UMTS networks are designed and optimized. Hence, a practical UMTS planning process must be defined in detail, from dimensioning to optimization tasks. This book follows the UMTS planning process. It is organized in three parts: Part I - UMTS configuration planning; Part II - UMTS topology planning; and Part III - UMTS network functionality. The first chapter in Part I introduces the UMTS and UTRAN systems and radio network planning strategy, and defines a planning process for UMTS. In Chapter 2, the UMTS planning process is covered, and a detailed description of the UMTS power budget is given, with planning threshold examples provided.

Why is indoor coverage needed, and how it is best implemented? As the challenge of providing higher data speeds and quality for mobile applications intensifies, ensuring adequate in-building and tunnel coverage and capacity is increasingly important. A unique, single-source reference on the theoretical and practical knowledge behind indoor and tunnel radio planning, Indoor Radio Planning, Second Edition provides an overview of mobile networks systems and coverage solutions with GSM, UMTS, HSPA and LTE cellular systems technologies as a backdrop. All of the available solutions, from basic passive distributed antenna systems (DAS) through to advanced fiber optic systems supporting MIMO and LTE, are discussed in detail to give the reader a good understanding. In addition, there is a section covering multi-operator systems, as this becomes a more and more utilized approach. Systematically moving from the basic considerations through to advanced indoor planning, aspects such as upgrading passive DAS from 2G to 3G, noise analysis, link budgets, traffic calculations and software tools that can be used to help create in-building designs are also covered. Femtocells, outdoor DAS and tunnel radio planning are newly included in this edition. • A new version of the bestseller, updated with an introduction to LTE and treatments of modulation principle, DAS systems for MIMO/LTE , designing repeater systems and elevator coverage • Addresses the challenge of providing coverage inside train, and high speed rail • Outlines the key parameters and metrics for designing DAS for GSM, DCS, UMTS, HSPA & LTE • Essential reading for engineering and planning personnel at mobile operators, also giving a sound grounding in indoor radio planning for equipment manufacturers • Written by a leading practitioner in the field with more than 20 years of practical experience

This book sets out to provide the theoretical foundations that will enable radio network planners to plan model and optimize radio networks using state-of-the-art findings from around the globe. It adopts a logical approach, beginning with the background to the present status of UMTS radio network technology, before devoting equal coverage to planning, modelling and optimization issues. All key planning areas are covered, including the technical and legal implications of network infrastructure sharing, hierarchical cell structure (HCS) deployment, ultra-high-site deployment and the benefits and limitations of using computer-aided design (CAD) software. Theoretical models for UMTS technology are explained as generic system models, stand-alone services and mixed services. Business modelling theory and methods are put forward, taking in propagation calculations, link-level, UMTS static and UMTS dynamic simulations. The challenges and goals of the automated optimization process are explored in depth using cutting-edge cost function and optimization algorithms. This theory-based resource containing prolific illustrative case studies explains the reasons for UMTS radio networks performance issues and how to use this foundational knowledge to model, plan and optimize present and future systems.

Highly regarded as the book on the air interface of 3G cellular systems WCDMA for UMTS has again been fully revised and updated. The third edition now covers the key features of 3GPP Release 6 ensuring it remains the leading principal resource in this constantly progressing area. By providing a deep understanding of the WCDMA air interface, the practical approach of this third edition will continue to appeal to operators, network and terminal manufacturers, service providers, university students and frequency regulators. Explains the key parts of the 3GPP/WCDMA standard Presents network dimensioning, coverage and capacity of WCDMA Introduces TDD and discusses its differences from FDD Key third edition updates include: Covers the main 3GPP Release 6 updates Further enhances High Speed Downlink Packet Access (HSDPA) chapter with a number of new simulation results Explains High Speed Uplink Packet Access (HSUPA) study item Introduces the new services including their performance analysis : Push-to-Talk over Cellular (PoC), streaming, See What I See (SWIS) and multiplayer games Presents a number of new WCDMA field measurement results: capacity, end-to-end performance and handovers Includes completely updated antenna beamforming and multiuser detection sections featuring new simulation results Introduces TD-SCDMA and compares it to Release TDD