Piping Design Handbook

Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.

One of the most important components of the infrastructure is the vast network of pipelines and process piping-literally millions and millions of miles. The term "pipelines" generally refers to the network of pipelines that transport water, sewage, steam, and gaseous and liquid hydrocarbons from sources (e.g., reservoirs, steam plants, oil and gas wells, refineries) to local distribution centers ("transmission pipelines"), and to the network of pipelines that distribute such products to local markets and end users ("distribution" pipelines). The term "process piping" generally refers to the system of pipes that transport process fluids (e.g. industrial gases, fuels, chemicals etc.) around an industrial facility involved in the manufacture of products or in the generation of power. It also is used to describe utility piping systems (e.g., air, steam, water, compressed air, fuels etc.) that are used in, or in support of the industrial process. Also, certain drainage piping--where corrosive or toxic fluids are being transported and severe conditions may be present, or where it is simply outside the scope of plumbing codes--is also sometimes classified as process piping. Some places where process piping is used are obvious, such as chemical and petrochemical plants, petroleum refineries, pharmaceutical manufacturing facilities and pulp & paper plants. However, there are many other not so obvious places where process piping is commonplace, such as semiconductor facilities, automotive and aircraft plants, water treatment operations, waste treatment facilities and many others.This book comprises of 9 course modules, which cover all aspects of piping design in easy to learn format. All topics are introduced to readers with no or limited background on the subject. A multiple choice quiz (total 255 questions) is provided at the end of each module to test the readers' knowledge and enhance learning. The book is very comprehensive and refresher to engineers and designers working in the field of piping in Oil and Gas, Chemical and Industrial plants. It is also very useful to fresh engineers joining industries for improving their knowledge in the field of fluid transportation and pipework.

This title made available for the first time an adequately organized, comprehensive analytical method for evaluating the stresses, reactions and deflections in an irregular piping system in space, unlimited as to the character, location or number of concentrated loadings or restraints. Profusely illustrated and meticulously detailed. This title made available for the first time an adequately organized, comprehensive analytical method for evaluating the stresses, reactions and deflections in an irregular piping system in space, unlimited as to the character, location or number of concentrated loadings or restraints. Profusely illustrated and meticulously detailed.

The Engineer’s Guide to Plant Layout and Piping Design for the Oil and Gas Industries gives pipeline engineers and plant managers a critical real-world reference to design, manage, and implement safe and effective plants and piping systems for today’s operations. This book fills a training void with complete and practical understanding of the requirements and procedures for producing a safe, economical, operable and maintainable process facility. Easy to understand for the novice, this guide includes critical standards, newer designs, practical checklists and rules of thumb. Due to a lack of structured training in academic and technical institutions, engineers and pipe designers today may understand various computer software programs but lack the fundamental understanding and implementation of how to lay out process plants and run piping correctly in the oil and gas industry. Starting with basic terms, codes and basis for selection, the book focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports, then goes on to cover piping stress analysis and the daily needed calculations to use on the job. Delivers a practical guide to pipe supports, structures and hangers available in one go-to source Includes information on stress analysis basics, quick checks, pipe sizing and pressure drop Ensures compliance with the latest piping and plant layout codes and complies with worldwide risk management legislation and HSE Focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports Covers piping stress analysis and the daily needed calculations to use on the job

Annotation Written for the piper and engineer in the field, this volume fills a huge void in piping literature since the Rip Weaver books of the 90s were taken out of print. Focussing not only on Auto CAD, but also on other computer-aided design programmes as well and manual techniques not found anywhere else, the book covers the entire spectrum of needs for the piping engineer. Covering general piping systems, this basic guide for the piping engineer offers standards in practices for covered in the original Rip Weaver series. It is the perfect introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for the new hire, the engineering student and the veteran engineer needing a reference.

Published by the Plastics Pipe Institute (PPI), the Handbook describes how polyethylene piping systems continue to provide utilities with a cost-effective solution to rehabilitate the underground infrastructure. The book will assist in designing and installing PE piping systems that can protect utilities and other end users from corrosion, earthquake damage and water loss due to leaky and corroded pipes and joints.

The Planning Guide to Piping Design, Second Edition, covers the entire process of managing and executing project piping designs, from conceptual to mechanical completion, also explaining what roles and responsibilities are required of the piping lead during the process. The book explains proven piping design methods in step-by-step processes that cover the increasing use of new technologies and software. Extended coverage is provided for the piping lead to manage piping design activities, which include supervising, planning, scheduling, evaluating manpower, monitoring progress and communicating the piping design. With newly revised chapters and the addition of a chapter on CAD software, the book provides the mentorship for piping leads, engineers and designers to grasp the requirements of piping supervision in the modern age. Provides essential standards, specifications and checklists and their importance in the initial set-up phase of piping project’s execution Explains and provides real-world examples of key procedures that the piping lead can use to monitor progress Describes project deliverables for both small and complex size projects Offers newly revised chapters including a new chapter on CAD software

The objective of this practical oil and gas piping handbook is to facilitate project management teams of oil and gas piping related construction projects to understand the key requirements of the discipline and to equip them with the necessary knowledge and protocol. It provides a comprehensive coverage on all the practical aspects of piping related material sourcing, fabrication essentials, welding related items, NDT activities, erection of pipes, pre-commissioning, commissioning, post-commissioning, project management and importance of ISO Management systems in oil and gas piping projects. This handbook assists contractors in ensuring the right understanding and application of protocols in the project. One of the key assets of this handbook is that the technical information and the format provided are practically from real time oil and gas piping projects; hence, the application of this information is expected to enhance the credibility of the contractors in the eyes of the clients and to some extent, simplify the existing operations. Another important highlight is that it holistically covers the stages from the raw material to project completion to handover and beyond. This will help the oil and gas piping contractors to train their project management staff to follow the best practices in the oil and gas industry. Furthermore, this piping handbook provides an important indication of the important project-related factors (hard factors) and organizational-related factors (soft factors) to achieve the desired project performance dimensions, such as timely completion, cost control, acceptable quality, safe execution and financial performance. Lastly, the role of ISO management systems, such as ISO 9001, ISO 14001 and OHSAS 18001 in construction projects is widely known across the industry; however, oil and gas specific ISO quality management systems, such as ISO 29001, and project specific management systems, such as ISO 21500, are not widely known in the industry, which are explained in detail in this handbook for the benefit of the oil and gas construction organizations. Features: Covering the stages from the raw material to project completion, to handover and beyond Providing practical guidelines to oil and gas piping contractors for training purposes and best practices in the oil and gas industry Emphasizing project-related factors (hard factors) and organizational-related factors (soft factors) with a view to achieve the desired project performance Highlighting the roles of ISO management systems in oil and gas projects.

In-depth Details on Piping Systems Filled with examples drawn from years of design and field experience, this practical guide offers comprehensive information on piping installation, repair, and rehabilitation. All of the latest codes, standards, and specifications are included. Piping Systems Manual is a hands-on design and engineering resource that explains the reasons behind the designs. You will get full coverage of materials, components, calculations, specifications, safety, and much more. Hundreds of detailed illustrations make it easy to understand the best practices presented in the book. Piping Systems Manual covers: ASME B31 piping codes Specifications and standards Materials of construction Fittings Valves and appurtenances Pipe supports Drafting practice Pressure drop calculations Piping project anatomy Field work and start-up What goes wrong Special services Infrastructure Strategies for remote locations