Natural Gas Conversion Iv Volume 107

The Fourth International Natural Gas Conversion Symposium was attended by 180 delegates from 25 countries. Representation was evenly balanced between industry and academia. The opening address was delivered by Mr Roy Pithey, Chairman of South Africa's Central Energy Fund, who dealt with the importance and utilisation of natural gas in sub-Saharan Africa. Plenary lectures were presented by Professors E. Iglesia (Catalyst design and selectivity for F-T synthesis) and E.E. Wolf (Oxidative Coupling Methane). A number of keynote addresses were delivered: - Dr T. Fleisch (Amoco) described the use of DME as a transport fuel and the work which has been carried out in this area in collaboration with Haldor Topsoe - Professor L.D. Schmidt (Univ. of Minnesota) explained his work on the direct conversion of methane at high velocities - Dr B. Jager (SASTECH R & D) reported on the recent developments in slurry and fluidized bed F-T reactors as SASOL - Dr J. Rostrup-Nielsen (Haldor Topsoe) discussed the role of catalysis in the conversion of natural gas for power generation. Areas signalled for further research were: direct conversion of methane to intermediate monomers; methanol conversion to higher alcohols; CO/H2 conversion in a commercially viable route to higher alcohols; and CO/H2 conversion to high quality gasoline. It is obvious that such developments would fit into the energy cycle which has moved from wood, to coal, to oil, to gas, and will most probably move to hydrogen.

This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow. The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable. These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 7th Natural gas Conversion Symposium held in Dalian, China, June 6-10, 2004, and a FREE CD-rom. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The manuscripts have been divided into eight different topics, Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion . These are the most interesting subjects in the utilization of natural gas with recent scientific innovation and technological advances. The book is of interest to all students and researchers active in utilization of natural gas. - This book contains the papers of the symposium that is considered to be the premier technical meeting in this area. - The chapters give an overview of the latest developments in utilization of natural gas. - Topics included in the book are: Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion.

This book provides an unparalleled contemporary assessment of hydrocarbon chemistry – presenting basic concepts, current research, and future applications. • Comprehensive and updated review and discussion of the field of hydrocarbon chemistry • Includes literature coverage since the publication of the previous edition • Expands or adds coverage of: carboxylation, sustainable hydrocarbons, extraterrestrial hydrocarbons • Addresses a topic of special relevance in contemporary science, since hydrocarbons play a role as a possible replacement for coal, petroleum oil, and natural gas as well as their environmentally safe use • Reviews of prior edition: “...literature coverage is comprehensive and ideal for quickly reviewing specific topics...of most value to industrial chemists...” (Angewandte Chemie) and “...useful for chemical engineers as well as engineers in the chemical and petrochemical industries.” (Petroleum Science and Technology)

This volume looks at the recent progress of this technology as reported in the 21 papers presented during the 219th National Meeting of the ACS in New York, September 5-11, 2003. In addition, the volume focuses on the use of modern spectroscopic techniques for the generation of detailed structural analysis required for the advancement of the science of FCC design. Other chapters look at the use and importance of solid state nuclear magnetic resonance (NMR), microcalorimetry and atomic force microscopy (AFM) to the study of FCCs and discussing strategies to control pollutant emissions from a refinery FCCU and looking at advances in FCC preparation.

This book covers the most important topics concerning cationic Ziegler-Natta and ring-opening metathesis polymerization of cycloolefins. The work describes the major pathways that cycloolefins can follow under the action of specific catalytic systems, essentially vinyl and ring-opening polymerization, both reaction types allowing the manufacture of distinct products with wide applicability in modern technologies. The comprehensive data available on this subject are logically and systematically selected and reviewed throughout 18 chapters, according to the basic catalytic processes involved, types of monomers and catalysts employed, reaction conditions and application fields. The modern trends in design of chiral metallocene catalysts, well-defined living metathesis catalysts, catalysts tolerant toward functionalities and water systems are highlighted. The book discusses in detail the relevant aspects of these processes including reaction thermodynamics, kinetics, mechanisms and stereochemistry and correlates the structure of produced polymers with their chemical and physical-mechanical properties. Related important topics include Ziegler-Natta polymerization of olefins and dienes, atom transfer radical polymerization of vinyl compounds, metathesis of olefins and acetylenes, acyclic diene metathesis reaction, carbonyl olefination reaction, metathesis polymerization of acetylenes, metathesis degradation of polymers and ring-opening polymerization of heterocycles. Special emphasis is laid upon the manufacture of commerical products, new polymers and copolymers of potential interest for industry and design and synthesis of speciality polymers with particular structures and architectures and desired properties. The book critically evaluates the most recent achievements reported in this field and outlines the modern trends on the research and application of the catalytic processes for cycloolefin polymerization. For the first time, comprehensive information about the published data on the subject up to now is provided for both academic and industrial researchers working in the areas of polymer chemistry, organic and organometallic chemistry, surface science and catalysis, petrochemistry and chemical engineering. This stimulating book offers an enlightening introduction and a quick documentation on the subject as well as a solid background in this field. Moreover, the work offers a wealth of useful information for specialists applying polymers in various scientific and industrial areas.

This volume includes papers presented at the second International Workshop on Oxide-based Systems at the Crossroads of Chemistry, held at Villa Olmo in Como, Italy, 8-11 October.The selected papers present the highlights of recent research in the field of oxide structure. A wide range of oxidic materials, including real oxides, zeolites and layer-structured systems, is considered and described in terms of preparation methods, structural characterization and the relation between active sites, structure and catalytic properties. The application of the most powerful simulation and physical-chemical techniques show their usefulness in discovering and explaining structural and dynamic properties of complex materials. Moreover the development of sophisticated spectroscopical and analytical techniques are shown to significantly improve the growth of surface oxide science, generating new tools for the knowledge of catalyst structure and reaction mechanisms. An interesting feature is the inclusion of papers which show the mutual roles of experiment and theoretical models.