Modeling And Experimental Investigation Of Spindle Dynamic Errors And Surface Generation In Ultra Precision Diamond Turning

In the second part, a comprehensive dynamic surface generation model with consideration of the spindle dynamics, cutting mechanism and machining error is proposed. Firstly, an algorithm for the cutting force calculation and surface generation is developed. This algorithm takes into account the effect of minimum chip thickness and elastic recovery. A groove cutting experiment was conducted to verify the effectiveness of the algorithm. The experimental results indicate that the algorithm is capable of addressing the minimum chip thickness and elastic recovery in the micro cutting process. This algorithm is integrated into the comprehensive dynamic surface generation model. The simulated and measured surface topographies indicate that the low frequency enveloping phenomenon due to double frequency vibration of the spindle has a significant effect on the surface topography. The surface topography in cylindrical turning changes with different spindle speeds, even though the feed rate per revolution remains unchanged. In ultra-precision machining, the requirement of ultra-high machining accuracy and ultra-smooth surface roughness makes the effects of spindle errors on form accuracy and surface finish of machined components highly significant, even though the spindle errors can be down to the nanometric range. Thus, it is very significant for this research to investigate the effect of spindle errors on machining accuracy and surface roughness with experimental and theoretical methods. Based on the investigation, the spindle unbalance induced eccentricity, double frequency vibration, as well as the position drift of the AAL of the ABS have been identified. The development of the comprehensive dynamic surface generation model with consideration of spindle dynamics, effect of tool edge radius and machining error can enable optimization of the cutting conditions in ultra-precision diamond turning.

Ultra-precision machining is a promising solution for achieving excellent machined surface quality and sophisticated micro/nano-structures that influence the applications of components and devices. Further, given the ultrathin layer of material removed, it is a highly coupled process between cutting tool and material. In this book, scientists in the fields of mechanical engineering and materials science from China, Ukraine, Japan, Singapore present their latest research findings regarding the simulation and experiment of material-oriented ultra-precision machining. Covering various machining methods (cutting, grinding, polishing, ion beam and laser machining) and materials (metal, semiconductor and hard-brittle ceramics), it mainly focuses on the evaluation of the fundamental mechanisms and their implementation in processing optimization for different materials. It is of significant theoretical and practical value for guiding the fabrication of ultra-smooth and functional surfaces using ultra-precision machining.

An Engineering Research Series title. One of the remarkable achievements of modern manufacturing techniques is the ability to achieve nano-metre surface finishes. Ultraprecision machining based on single-point diamond turning (SPDT) is a very important technique in the manufacture of high-precision components where surface finish is critical. Complex optical surfaces, for example, can be produced without the need for post-machining polishing. This book focuses on the aspect of modelling nano-surface generation in ultra precision SPDT. Potential industrial applications in the prediction of surface quality, the process optimization, and precision mould manufacturing are also studies. The essential differences between single-point diamond turning and conventional machining are described. The history and technology of single-point diamond turning are presented and single chapters emphasize the related metrology and cutting mechanics. Important aspects of surface generation are also discussed. Features of the text are the sound approach, systematic mathematical modelling, and computer-aided simulation of surface generation in the development of surfaces exhibiting nano-surface qualities. TOPICS COVERED INCLUDE: Fundamentals of ultra-precision diamond turning technology Cutting mechanics and analysis of microcutting force variation Mechanisms of surface generation Characterization and modelling of nano-surface generation Computer-aided simulation of nano-surface generation Diamond turning of aspheric optics. Based upon the extensive experience of the authors Surface Generation in Ultra-precision Diamond Turning: Modelling and Practices will be of interest to engineers, scientists, and postgraduate students.

This handbook covers the fly cutting technique, an ultra-precision mechanical machining technology which is regarded as the fastest and most reliable low-cost machining method to generate high quality complex surfaces. The ultra-precision raster milling provides more flexibility and suitability for freeform and structural surfaces with a uniform quality with sub-micrometric form error and nanometric surface roughness. These surfaces are widely applied into optics, medicine, biotechnology, electronics, and communications. The fundamental and latest advancing knowledge of fly-cutting technology is important for the future development and applications in ultra-precision mechanical machining technology. This book provides a good reference for fly-cutting technology in ultra-precision machining for undergraduate and postgraduate students, researchers, engineers, and postdoctoral fellow in advanced manufacturing area. It gives the audience an overview of the working principles, process mechanism, salient features, applications, and research directions of ultra-precision fly-cutting technology.

This book presents an in-depth study and elucidation on the mechanisms of the micro-cutting process, with particular emphasis and a novel viewpoint on materials characterization and its influences on ultra-precision machining. Ultra-precision single point diamond turning is a key technology in the manufacture of mechanical, optical and opto-electronics components with a surface roughness of a few nanometers and form accuracy in the sub-micrometric range. In the context of subtractive manufacturing, ultra-precision diamond turning is based on the pillars of materials science, machine tools, modeling and simulation technologies, etc., making the study of such machining processes intrinsically interdisciplinary. However, in contrast to the substantial advances that have been achieved in machine design, laser metrology and control systems, relatively little research has been conducted on the material behavior and its effects on surface finish, such as the material anisotropy of crystalline materials. The feature of the significantly reduced depth of cut on the order of a few micrometers or less, which is much smaller than the average grain size of work-piece materials, unavoidably means that conventional metal cutting theories can only be of limited value in the investigation of the mechanisms at work in micro-cutting processes in ultra-precision diamond turning.

Modeling and machining are two terms closely related. The benefits of the application of modeling on machining are well known. The advances in technology call for the use of more sophisticated machining methods for the production of high-end components. In turn, more complex, more suitable, and reliable modeling methods are required. This book pertains to machining and modeling, but focuses on the special aspects of both. Many researchers in academia and industry, who are looking for ways to refine their work, make it more detailed, increase their accuracy and reliability, or implement new features, will gain access to knowledge in this book that is very scare to find elsewhere.

Presented here are 73 refereed papers given at the 34th MATADOR Conference held at UMIST in July 2004. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The 34th proceedings contains original papers contributed by researchers from many countries on different continents. The papers cover both the technological aspect of manufacturing processes; and the systems, business and management features of manufacturing enterprise. The papers in this volume reflect: - the importance of manufacturing to international wealth creation; - the necessity of responsiveness and agility of manufacturing companies to meet market-led requirements and international change; - the role of information technology and electronic communications in the growth of global manufacturing enterprises; - the impact of new technologies, new materials and processes, on the ability to produce goods of higher quality, more quickly, to meet markets needs at a lower cost. Some of the major generic developments which have taken place in these areas since the 33rd MATADOR conference was held in 2000 are reported in this volume.

Selected, peer reviewed papers from the 4th Asia Pacific Conference on Optics Manufacture (APCOM 2014), November 9-11, 2014, Guangzhou, China

This book contains the research report of the DFG Research Unit FOR 1845 (2014-2020) of the Universities of Bremen and Hannover. The thematic focus lies on speeding up ultra-precision machining technology by following a holistic approach to high-performance cutting. This includes ultra-precision milling at high spindle speeds (>10000 rpm), precision tool setting mechanisms for multi-cutting-edge diamond milling tools, magnetic levitation technology for high velocity feed axes, and dedicated control strategies for error identification and compensation at high speeds. Furthermore, automation and measurement aspects of the machine setup process especially for precision balancing of the spindle rotors are presented. Finally, it is demonstrated that how the developed technologies may be integrated into a common machine tool setup. The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.