Microwave Active Circuit Analysis And Design

This book teaches the skills and knowledge required by today’s RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts Contains tutorial questions and problems allowing readers to test their knowledge An accompanying website containing supporting material in the form of slides and software (MATLAB) listings Unique material on negative resistance oscillator design, noise analysis and three-port design techniques Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere

Four leaders in the field of microwave circuit design share their newest insights into the latest aspects of the technology The third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques delivers an insightful and complete analysis of microwave circuit design, from their intrinsic and circuit properties to circuit design techniques for maximizing performance in communication and radar systems. This new edition retains what remains relevant from previous editions of this celebrated book and adds brand-new content on CMOS technology, GaN, SiC, frequency range, and feedback power amplifiers in the millimeter range region. The third edition contains over 200 pages of new material. The distinguished engineers, academics, and authors emphasize the commercial applications in telecommunications and cover all aspects of transistor technology. Software tools for design and microwave circuits are included as an accompaniment to the book. In addition to information about small and large-signal amplifier design and power amplifier design, readers will benefit from the book's treatment of a wide variety of topics, like: An in-depth discussion of the foundations of RF and microwave systems, including Maxwell's equations, applications of the technology, analog and digital requirements, and elementary definitions A treatment of lumped and distributed elements, including a discussion of the parasitic effects on lumped elements Descriptions of active devices, including diodes, microwave transistors, heterojunction bipolar transistors, and microwave FET Two-port networks, including S-Parameters from SPICE analysis and the derivation of transducer power gain Perfect for microwave integrated circuit designers, the third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques also has a place on the bookshelves of electrical engineering researchers and graduate students. It's comprehensive take on all aspects of transistors by world-renowned experts in the field places this book at the vanguard of microwave circuit design research.

The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.

This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Today’s Up-to-Date, Step-by-Step Guide to Designing Active Microwave Circuits Microwave Circuit Design is a complete guide to modern circuit design, including simulation tutorials that demonstrate Keysight Technologies’ Advanced Design System (ADS), one of today’s most widely used electronic design automation packages. And the software-based circuit design techniques that Yeom presents can be easily adapted for any modern tool or environment. Throughout, author Kyung-Whan Yeom uses the physical interpretation of basic concepts and concrete examples—not exhaustive calculations—to clearly and concisely explain the essential theory required to design microwave circuits, including passive and active device concepts, transmission line theory, and the basics of high-frequency measurement. To bridge the gap between theory and practice, Yeom presents real-world, hands-on examples focused on key elements of modern communication systems, radars, and other microwave transmitters and receivers. Practical coverage includes Up-to-date microwave simulation design examples based on ADS and easily adaptable to any simulator Detailed, step-by-step derivations of key design parameters related to procedures, devices, and performance Relevant, hands-on problem sets in every chapter Clear discussions of microwave IC categorization and roles; passive device impedances and equivalent circuits; coaxial and microstrip transmission lines; active devices (FET, BJT, DC Bias); and impedance matching A complete, step-by-step introduction to circuit simulation using the ADS toolset and window framework Low noise amplifier (LNA) design: gains, stability, conjugate matching, and noise circles Power amplifier (PA) design: optimum load impedances, classification, linearity, and composite PAs Microwave oscillator design: oscillation conditions, phase noise, basic circuits, and dielectric resonators Phase lock loops (PLL) design: configuration, operation, components, and loop filters Mixer design: specifications, Schottky diodes, qualitative analysis of mixers (SEM, SBM, DBM), and quantitative analysis of single-ended mixer (SEM) Microwave Circuit Design brings together all the practical skills graduate students and professionals need to successfully design today’s active microwave circuits.

The book discusses active devices and circuits for microwave communications. It begins with the basics of device physics and then explores the design of microwave communication systems including analysis and the implementation of different circuits. In addition to classic topics in microwave active devices, such as p-i-n diodes, Schottky diodes, step recovery diodes, BJT, HBT, MESFET, HFET, and various microwave circuits like switch, phase shifter, attenuator, detector, amplifier, multiplier and mixer, the book also covers modern areas such as Class-F power amplifiers, direct frequency modulators, linearizers, and equalizers. Most of the examples are based on practical devices available in commercial markets and the circuits presented are operational. The book uses analytical methods to derive values of circuit components without the need for any circuit design tools, in order to explain the theory of the circuits. All the given analytical expressions are also cross verified using commercially available microwave circuit design tools, and each chapter includes relevant diagrams and solved problems. It is intended for scholars in the field of electronics and communication engineering.

Provides detailed coverage of passive and active RF and microwave circuit design. Discusses the practical aspects of microwave circuits including fabrication technologies. Includes a treatment of heterostructure and wide-band gap devices. Examines compact and low cost circuit design methodologies.

Describes the use of the Real Frequency Technique for designing and realizing RF/microwave amplifiers and circuits This book focuses on the authors' Real Frequency Technique (RFT) and its application to a wide variety of multi-stage microwave amplifiers and active filters, and passive equalizers for radar pulse shaping and antenna return loss applications. The first two chapters review the fundamentals of microwave amplifier design and provide a description of the RFT. Each subsequent chapter introduces a new type of amplifier or circuit design, reviews its design problems, and explains how the RFT can be adapted to solve these problems. The authors take a practical approach by summarizing the design steps and giving numerous examples of amplifier realizations and measured responses. Provides a complete description of the RFT as it is first used to design multistage lumped amplifiers using a progressive optimization of the equalizers, leading to a small number of parameters to optimize simultaneously Presents modifications to the RFT to design trans-impedance microwave amplifiers that are used for photodiodes acting as high impedance current sources Discusses the methods using the RFT to optimize equalizers made of lossy distributed networks Covers methods and examples for designing standard linear multi-stage power amplifiers and those using arborescent structures Describes how to use the RFT to design multi ]stage active filters Shows the flexibility of the RFT to solve a variety of microwave circuit design problems like the problem of passive equalizer design for Radar receivers Examines a possible method for the synthesis of microwave antennas using the RFT Microwave Amplifier and Active Circuit Design Using the Real Frequency Technique is intended for researchers and RF and microwave engineers but is also suitable for advanced graduate students in circuit design. Dr. Beneat and Dr. Jarry are members of the editorial board of Wiley’s International Journal of RF and Microwave Computer Aided Engineering. They have published seven books together, including Advanced Design Techniques and Realizations of Microwave and RF Filters (Wiley-IEEE 2008), Design and Realizations of Miniaturized Fractals RF and Microwave Filters (Wiley 2009), Miniaturized Microwave Fractal Filters—M2F2 (Wiley 2012), and RF and Microwave Electromagnetism (Wiley-ISTE 2014).

This book presents analysis and design methods of microwave nonlinear active circuits. Nonlinear models are established for each individual device, thus introducing a set of nonlinear building blocks. This allows not only qualitative but also quantitative investigations. The relationships thereby obtained can be used for design purposes, and they are also a help in understanding the circuit operation and for the detailed investigation of oscillators, amplifiers, mixers, frequency multipliers and dividers. The book concentrates on problems arising from the active nonlinear elements, and it is mostly nonlinear transmission properties that are investigated. Normalized quantities are applied in order to obtain results that can be used generally for a wide range of applications. Equations are derived for many important circuit characteristics such as bandwidth, gain, amplitude and phase response, group delay time, AM compression, AM to PM conversion, noise figure, AM noise, FM noise, output power, added power, efficiency, matching, optimum adjustment, stability, dynamic properties. The results are directly applicable in the design procedure of circuits.