Methods And Applications Of Intelligent Control

This book is concerned with Intelligent Control methods and applications. The field of intelligent control has been expanded very much during the recent years and a solid body of theoretical and practical results are now available. These results have been obtained through the synergetic fusion of concepts and techniques from a variety of fields such as automatic control, systems science, computer science, neurophysiology and operational research. Intelligent control systems have to perform anthropomorphic tasks fully autonomously or interactively with the human under known or unknown and uncertain environmental conditions. Therefore the basic components of any intelligent control system include cognition, perception, learning, sensing, planning, numeric and symbolic processing, fault detection/repair, reaction, and control action. These components must be linked in a systematic, synergetic and efficient way. Predecessors of intelligent control are adaptive control, self-organizing control, and learning control which are well documented in the literature. Typical application examples of intelligent controls are intelligent robotic systems, intelligent manufacturing systems, intelligent medical systems, and intelligent space teleoperators. Intelligent controllers must employ both quantitative and qualitative information and must be able to cope with severe temporal and spatial variations, in addition to the fundamental task of achieving the desired transient and steady-state performance. Of course the level of intelligence required in each particular application is a matter of discussion between the designers and users. The current literature on intelligent control is increasing, but the information is still available in a sparse and disorganized way.

This book introduces the development process, structural theories and research areas of intelligent control; explains the knowledge representations, searching and reasoning mechanisms as the fundamental techniques of intelligent control; studies the theoretical principles and architectures of various intelligent control systems; analyzes the paradigms of representative applications of intelligent control; and discusses the research and development trends of the intelligent control.From the general point of view, this book possesses the following features: updated research results both in theory and application that reflect the latest advances in intelligent control; closed connection between theory and practice that enables readers to use the principles to their case studies and practical projects; and comprehensive materials that helps readers in understanding and learning.

Introducton; Methology of knowledge representation; General inference principles; Hierarchical control systems; Expert control systems; Fuzzy control systems; Neurocontrol systems; Learning control systems; Intelligente control systems in application; Prospectives of intelligente control; References; Bibliography; Subject index.

This book offers a comprehensive introduction to intelligent control system design, using MATLAB simulation to verify typical intelligent controller designs. It also uses real-world case studies that present the results of intelligent controller implementations to illustrate the successful application of the theory. Addressing the need for systematic design approaches to intelligent control system design using neural network and fuzzy-based techniques, the book introduces the concrete design method and MATLAB simulation of intelligent control strategies; offers a catalog of implementable intelligent control design methods for engineering applications; provides advanced intelligent controller design methods and their stability analysis methods; and presents a sample simulation and Matlab program for each intelligent control algorithm. The main topics addressed are expert control, fuzzy logic control, adaptive fuzzy control, neural network control, adaptive neural control and intelligent optimization algorithms, providing several engineering application examples for each method.

This volume introduces new approaches in intelligent control area from both the viewpoints of theory and application. It consists of eleven contributions by prominent authors from all over the world and an introductory chapter. This volume is strongly connected to another volume entitled "New Approaches in Intelligent Image Analysis" (Eds. Roumen Kountchev and Kazumi Nakamatsu). The chapters of this volume are self-contained and include summary, conclusion and future works. Some of the chapters introduce specific case studies of various intelligent control systems and others focus on intelligent theory based control techniques with applications. A remarkable specificity of this volume is that three chapters are dealing with intelligent control based on paraconsistent logics.

Intelligent Control with LabVIEWTM is a fresh and pragmatic approach to the understanding of a subject often clouded by too much mathematical theory. It exploits the full suite of tools provided by LabVIEWTM, showing the student how to design, develop, analyze, and visualize intelligent control algorithms quickly and simply. Block diagrams are used to follow the progress of an algorithm through the design process and allow seamless integration with hardware systems for rapid deployment in laboratory experiments. This text delivers a thorough grounding in the main tools of intelligent control: fuzzy logic systems; artificial neural networks; neuro-fuzzy systems; evolutionary methods; and predictive methods. Learning and teaching are facilitated by: extensive use of worked examples; end of chapter problems with separate solutions; and provision of intelligent control tools for LabVIEWTM.

As robotic systems make their way into standard practice, they have opened the door to a wide spectrum of complex applications. Such applications usually demand that the robots be highly intelligent. Future robots are likely to have greater sensory capabilities, more intelligence, higher levels of manual dexter ity, and adequate mobility, compared to humans. In order to ensure high-quality control and performance in robotics, new intelligent control techniques must be developed, which are capable of coping with task complexity, multi-objective decision making, large volumes of perception data and substantial amounts of heuristic information. Hence, the pursuit of intelligent autonomous robotic systems has been a topic of much fascinating research in recent years. On the other hand, as emerging technologies, Soft Computing paradigms consisting of complementary elements of Fuzzy Logic, Neural Computing and Evolutionary Computation are viewed as the most promising methods towards intelligent robotic systems. Due to their strong learning and cognitive ability and good tolerance of uncertainty and imprecision, Soft Computing techniques have found wide application in the area of intelligent control of robotic systems.

Intelligent Vibration Control in Civil Engineering Structures provides readers with an all-encompassing view of the theoretical studies, design methods, real-world implementations, and applications relevant to the topic The book focuses on design and property tests on different intelligent control devices, innovative control strategies, analysis examples for structures with intelligent control devices, and designs and tests for intelligent controllers. Focuses on the principles, methods, and applications of intelligent vibration control in civil engineering Covers intelligent control, including active and semi-active control Includes comprehensive contents, such as design and properties of different intelligent control devices, control strategies, and dynamic analysis, intelligent controller design, numerical examples, and experimental data

The emergence of fuzzy logic and its applications has dramatically changed the face of industrial control engineering. Over the last two decades, fuzzy logic has allowed control engineers to meet and overcome the challenges of developing effective controllers for increasingly complex systems with poorly defined dynamics. Today's engineers need a working knowledge of the principles and techniques of fuzzy logic-Intelligent Control provides it. The author first introduces the traditional control techniques and contrasts them with intelligent control. He then presents several methods of representing and processing knowledge and introduces fuzzy logic as one such method. He highlights the advantages of fuzzy logic over other techniques, indicates its limitations, and describes in detail a hierarchical control structure appropriate for use in intelligent control systems. He introduces a variety of applications, most in the areas of robotics and mechatronics but with others including air conditioning and process/production control. One appendix provides discussion of some advanced analytical concepts of fuzzy logic, another describes a commercially available software system for developing fuzzy logic application. Intelligent Control is filled with worked examples, exercises, problems, and references. No prior knowledge of the subject nor advanced mathematics are needed to comprehend much of the book, making it well-suited as a senior undergraduate or first-year graduate text and a convenient reference tool for practicing professionals.

In recent years, intelligent control has emerged as one of the most active and fruitful areas of research and development. Until now, however, there has been no comprehensive text that explores the subject with focus on the design and analysis of biological and industrial applications. Intelligent Control Systems Using Soft Computing Methodologies does all that and more. Beginning with an overview of intelligent control methodologies, the contributors present the fundamentals of neural networks, supervised and unsupervised learning, and recurrent networks. They address various implementation issues, then explore design and verification of neural networks for a variety of applications, including medicine, biology, digital signal processing, object recognition, computer networking, desalination technology, and oil refinery and chemical processes. The focus then shifts to fuzzy logic, with a review of the fundamental and theoretical aspects, discussion of implementation issues, and examples of applications, including control of autonomous underwater vehicles, navigation of space vehicles, image processing, robotics, and energy management systems. The book concludes with the integration of genetic algorithms into the paradigm of soft computing methodologies, including several more industrial examples, implementation issues, and open problems and open problems related to intelligent control technology. Suitable as a textbook or a reference, Intelligent Control Systems explores recent advances in the field from both the theoretical and the practical viewpoints. It also integrates intelligent control design methodologies to give designers a set of flexible, robust controllers and provide students with a tool for solving the examples and exercises within the book.