Membrane Filtration Guidance Manual

Currently, the most common form of drinking water treatment for surface water sources involves the chemical/physical removal of particulate matter by coagulation, flocculation, sedimentation, and filtration processes, along with disinfection to inactivate any remaining pathogenic microorganisms. Filtration remains the cornerstone of drinking water treatment, conventionally in the form of granular media depth filters. Although granular media filters can produce high quality water, they represent a probabilistic rather than an absolute barrier; consequently, pathogens can still pass through the filters and pose a health risk. The disinfection process provides an additional measure of public health protection by inactivating these microorganisms. However, some microorganisms, such as Cryptosporidium, are resistant to common primary disinfection practices such as chlorination and chloramination. Furthermore, drinking water regulations have established maximum contaminant levels (MCLs) for disinfection byproducts (DBPs) that may create incentive for drinking water utilities to minimize the application of some disinfectants. As a result of the concern over chlorine-resistant microorganisms and DBP formation, the drinking water industry is increasingly utilizing alternative treatment technologies in an effort to balance the often-competing objectives of disinfection and DBP control. One such alternative technology that has gained broad acceptance is membrane filtration. Although the use of membrane processes has increased rapidly in recent years, the application of membranes for water treatment extends back several decades. Reverse osmosis (RO) membranes have been used for the desalination of water since the 1960s, with more widespread use of nanofiltration (NF) for softening and the removal of total organic carbon (TOC) dating to the late 1980s. However, the commercialization of backwashable hollow-fiber microfiltration (MF) and ultrafiltration (UF) membrane processes for the removal of particulate matter (i.e., turbidity and microorganisms) in the early 1990s has had the most profound impact on the use, acceptance, and regulation of all types of membrane processes for drinking water treatment. The purpose of this guidance manual is to provide technical information on the use of membrane filtration and application of the technology for compliance with the Long Term 2 Enhanced Surface Water Treatment Rule, which would require certain systems to provide additional treatment for Cryptosporidium.

Membrane structure and function; Production of membrane filters; Characterization and standardization of membrane filters; Manufactures of membrane filters; Selecting and using a filter system; Sterilizing and process filtration; Applications using direct microscopy; Viability counting; Microbiological examination of water; Biomedical and analytical uses; Assay of viruses in water; Ultrafiltration and reverse osmosis; Air filtration.

Membrane integrity is in an interesting combination of science, engineering, and regulations. The book introduces the reader to the subject in the context of drinking water filtration. Both theoretical and practical aspects of membrane integrity testing are discussed along with historical and future technologies. Discussed are the types and causes of integrity breaches, tests to perform to discover them, how to establish a membrane integrity testing program and government disinfection regulations.

This manual suggests design operating and performance criteria for specific surface water quality conditions to provide the optimum protection from microbiological contaminants.

This manual contains necessary and useful information and data in an easily accessible format relating to the use of membranes. Membranes are among the most important engineering components in use today, and each year more and more effective uses for membrane technologies are found - for example: water purification, industrial effluent treatment, solvent dehydration by per-vaporation, recovery of volatile organic compounds, protein recovery, bioseparations and many others. The pace of change in the membrane industry has been accelerating rapidly in recent years, occasioned in part by the demand of end-users, but also as a result of the investment in R&D by manufacturers. To reflect these changes the author has obtained the latest information from some of the leading suppliers in the business. In one complete volume this unique handbook gives practical guidance to using selected membrane processes in individual industries while also providing a useful guide to equipment selection and usage.

Proceedings of the 2006 AWWA Annual Conference and Exposition held June 2006 in San Antonio TX CD-ROM provides current information on all aspects of drinking water Topics include water quality water resources and conservation water utility security water utility vulnerability assessments conventional and advanced water treatment desalination water reclamation and reuse water transmission and distribution system infrastructure water utility management water plant operations privatization and competition automation regulations benchmarking