Mechanics Of Elastic Contacts

Materials and mechanical engineering researchers studying wear, fretting, elastic indentation testing and other tribological processes frequently need closed-form solutions for various attributes of contacts. These characteristics include contact law, pressure distribution, internal state of stress induced and the influence of friction. Materials and mechanical engineering researchers studying wear, fretting, elastic indentation testing and other tribological processes frequently need closed-form solutions for various attributes of contacts. These characteristics include contact law, pressure distribution, internal state of stress induced and the influence of friction. These solutions, scattered throughout the applied mechanics literature, are difficult to locate, are presented using a range of solution techniques, and express results in a way that is suitable only for experts in the field. `Mechanics of Elastic Contacts' uses a consistent set of recipes for the solution of all relevant problems, presents results in the simplest possible forms, and contains summaries using tabulated data. This reference source will provide a clear guide to elastic contacts for engineering designers, materials scientists and tribologists irrespective of their level of expertise in this important subject.

Mechanical engineering, an engineering discipline forged and shaped by the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions. The Mechanical Engineering Series features graduate texts and research mo- graphs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and - search. We are fortunate to have a distinguished roster of consulting editors on the advisory board, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the facing page of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, pr- essing, production systems, thermal science, and tribology. Professor Finnie, the consulting editor for mechanics of materials, and I are pleased to present Introduction to Contact Mechanics by Anthony C. Fischer- Cripps.

This treatise is concerned with the stresses and deformation of solid bodies in contact with each other, along curved surfaces which touch initially at a point or along a line. Examples are a railway wheel and rail, or a pair of gear wheel teeth. Professor Johnson first reviews the development of the theory of contact stresses since the problem was originally addressed by H. Hertz in 1882. Next he discusses the influence of friction and the topographical roughness of surfaces, and this is incorporated into the theory of contact mechanics. An important feature is the treatment of bodies which deform plastically or viscoelastically. In addition to stationary contact, an appreciable section of the book is concerned with bodies which are in sliding or rolling contact, or which collide.

This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.

This book is intended for mechanicians, engineering mathematicians, and, generally for theoretically inclined mechanical engineers. It has its origin in my Master's Thesis (J 957), which I wrote under the supervision of Professor Dr. R. Timman of the Delft TH and Dr. Ir. A. D. de Pater of Netherlands Railways. I did not think that the surface of the problem had even been scratched, so I joined de Pater, who had by then become Professor in the Engineering Mechanics Lab. of the Delft TH, to write my Ph. D. Thesis on it. This thesis (1967) was weil received in railway circles, which is due more to de Pater's untiring promotion than to its merits. Still not satisfied, I feit that I needed more mathe matics, and I joined Professor Timman's group as an Associate Professor. This led to the present work. Many thanks are due to G. M. L. Gladwell, who thoroughly polished style and contents of the manuscript. Thanks are also due to my wife, herself an engineering mathematician, who read the manuscript through critically, and made many helpful comments, to G. F. M. Braat, who also read an criticised, and, in addition, drew the figures together with J. Schonewille, to Ms. A. V. M. de Wit, Ms. M. den Boef, and Ms. P. c. Wilting, who typed the manuscript, and to the Publishers, who waited patiently. Delft-Rotterdam, 17 July 1990. J. J.

The contact of one deformable body with another lies at the heart of almost every mechanical structure. Here, in a comprehensive treatment, two of the field's leading researchers present a systematic approach to contact problems. Using variational formulations, Kikuchi and Oden derive a multitude of new results, both for classical problems and for nonlinear problems involving large deflections and buckling of thin plates with unilateral supports, dry friction with nonclassical laws, large elastic and elastoplastic deformations with frictional contact, dynamic contacts with dynamic frictional effects, and rolling contacts. This method exposes properties of solutions obscured by classical methods, and it provides a basis for the development of powerful numerical schemes. Among the novel results presented here are algorithms for contact problems with nonlinear and nonlocal friction, and very effective algorithms for solving problems involving the large elastic deformation of hyperelastic bodies with general contact conditions. Includes detailed discussion of numerical methods for nonlinear materials with unilateral contact and friction, with examples of metalforming simulations. Also presents algorithms for the finite deformation rolling contact problem, along with a discussion of numerical examples.

This book, based on the analogy between contact mechanics and fracture mechanics proposed by the author twenty years ago, starts with a treatment of the surface energy and tension of solids and surface thermodynamics. The essential concepts of fracture mechanics are presented with emphasis on the thermodynamic aspects. Readers will find complete analytical results and detailed calculations for cracks submitted to pressure distributions and the Dugdale model. Contact mechanics and the contact and adherence of rough solids are also covered.

This book describes the solution of contact problems with an emphasis on idealized (mainly linear) elastic problems that can be treated with elementary analytical methods. General physical and mathematical features of these solutions are highlighted. Topics covered include the contact of rough surfaces and problems involving adhesive (e.g. van der Waals) forces. The author is a well-known researcher in the subject with hands-on experience of the topics covered and a reputation for lucid explanations. The target readership for the book includes researchers who encounter contact problems but whose primary focus is not contact mechanics. Coverage is also suitable for a graduate course in contact mechanics and end-of-chapter problems are included.

This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.