Materials Analysis By Ion Backscattering And Channeling

Our intention has been to write a book that would be useful to people with a variety of levels of interest in this subject. Clearly it should be useful to both graduate students and workers in the field. We have attempted to bring together many of the concepts used in channeling beam analysis with an indication of the origin of the ideas within fundamental channeling theory. The level of the book is appropriate to senior under-graduates and graduate students who have had a modern physics course work in related areas of materials science and wish to learn more about the "channeling" probe, its strengths, weaknesses, and areas of further potential application. To them we hope we have explained this apparent paradox of using mega-electron volt ions to probe solid state phenomena that have characteristic energies of electron volts.

Backscattering Spectrometry reviews developments in backscattering spectrometry and covers topics ranging from instrumentation and experimental techniques to beam parameters and energy loss measurements. Backscattering spectrometry of thin films is also considered, and examples of backscattering analysis are given. This book is comprised of 10 chapters and begins with an introduction to backscattering spectrometry, what it can and what it cannot accomplish, and some ""rules of thumb"" for interpreting or reading spectra. The relative strengths and weaknesses of backscattering spectrometry in the framework of materials analysis are outlined. The following chapters focus on kinematics, scattering cross sections, energy loss, and energy straggling; backscattering analysis of thin films of various degrees of complications; the influence of beam parameters; and mass and depth resolutions and their relationships to the mass and energy of projectiles. Many examples of backscattering analysis are also presented to illustrate the capability and limitation of backscattering. Backscattering applications when combined with channeling effects are considered as well. The final chapter provides a list of references on the applications of backscattering spectrometry. This monograph will be a useful resource for physicists.

The use of ion beams for materials analysis involves many different ion-atom interaction processes which previously have largely been considered in separate reviews and texts. A list of books and conference proceedings is given in Table 2. This book is divided into three parts, the first which treats all ion beam techniques and their applications in such diverse fields as materials science, thin film and semiconductor technology, surface science, geology, biology, medicine, environmental science, archaeology and so on.

Ion Beam Handbook for Material Analysis emerged from the U.S.-Italy Seminar on Ion Beam Analysis of Near Surface Regions held at the Baia-Verde Hotel, Catania, June 17-20, 1974. The seminar was sponsored by the National Science Foundation and the Consiglio Nazionale delle Ricerche under the United States-Italy Cooperative Science Program. The book provides a useful collection of tables, graphs, and formulas for those involved in ion beam analysis. These tables, graphs, and formulas are divided into five chapters that cover the following topics: energy loss and energy straggling; backscattering spectrometry; channeling; applications of ion-induced nuclear reactions; and the use of ion-induced X-ray yields.

The II. International Conference on Ion Beam Surface Layer Analysis was held on September 15-19, 1975 at the Nuclear Research Center, Karlsruhe, Germany. The date fell between two related con ferences: "Application of Ion-Beams to Materials" at Warwick, Eng land and "Atomic Collisions in Solids" at Amsterdam, the Nether lands. The first conference on Ion Beam Surface Layer Analysis was held at Yorktown Heights, New York, 1973. The major topic of that and the present conference was the material analysis with ion beams including backscattering and channeling, nuclear reactions and ion induced X-rays with emphasis on technical problems and no vel applications. The increasing interest in this field was docu mented by 7 invited papers and 85 contributions which were presen ted at the meeting in Karlsruhe to about 150 participants from 21 countries. The oral presentations were followed by parallel ses sions on "Fundamental Aspects", "Analytical Problems" and "Appli cations" encouraging detailed discussions on the topics of most current interest. Summaries of these sessions were presented by the discussion leaders to the whole conference. All invited and contributed papers are included in these proceedings; summaries of the discussion sessions will appear in a separate booklet and are availble from the editors. The application of ion beams to material analysis is now well established.

The II. International Conference on Ion Beam Surface Layer Analysis was held on September 15-19, 1975 at the Nuclear Research Center, Karlsruhe, Germany. The date fell between two related con ferences: "Application of Ion-Beams to Materials" at Warwick, Eng land and "Atomic Collisions in Solids" at Amsterdam, the Nether lands. The first conference on Ion Beam Surface Layer Analysis was held at Yorktown Heights, New York, 1973. The major topic of that and the present conference was the material analysis with ion beams including backscattering and channeling, nuclear reactions and ion induced X-rays with emphasis on technical problems and no vel applications. The increasing interest in this field was docu mented by 7 invited papers and 85 contributions which were presen ted at the meeting in Karlsruhe to about 150 participants from 21 countries. The oral presentations were followed by parallel ses sions on "Fundamental Aspects", "Analytical Problems" and "Appli cations" encouraging detailed discussions on the topics of most current interest. Summaries of these sessions were presented by the discussion leaders to the whole conference. All invited and contributed papers are included in these proceedings; summaries of the discussion sessions will appear in a separate booklet and are availble from the editors. The application of ion beams to material analysis is now well established.

A comprehensive tutorial on techniques and interpreting results in experiments concerning radiation technologies such as ion implantation, ion beam mixing, etc. and the effects of radiation on thin surface layers of metals and other materials. Reviews the fundamental features of rapid nuclear analysis methods, such as Rutherford backscattering and channeling, in conjunction with changes of ion energy, ion-induced x-ray emission, and nuclear microanalysis. Also presents the results of the authors' original research into the mechanisms of damage and structural transformations in multicomponent and multilayer structures and in ion-irradiated GaAs and Ni single crystals, and the processes of defect interaction in collision cascades. Originally published in Russian in 1987. Book club price, $84. Annotation copyrighted by Book News, Inc., Portland, OR

A comprehensive review of ion beam application in modern materials research is provided, including the basics of ion beam physics and technology. The physics of ion-solid interactions for ion implantation, ion beam synthesis, sputtering and nano-patterning is treated in detail. Its applications in materials research, development and analysis, developments of special techniques and interaction mechanisms of ion beams with solid state matter result in the optimization of new material properties, which are discussed thoroughly. Solid-state properties optimization for functional materials such as doped semiconductors and metal layers for nano-electronics, metal alloys, and nano-patterned surfaces is demonstrated. The ion beam is an important tool for both materials processing and analysis. Researchers engaged in solid-state physics and materials research, engineers and technologists in the field of modern functional materials will welcome this text.

The II. International Conference on Ion Beam Surface Layer Analysis was held on September 15-19, 1975 at the Nuclear Research Center, Karlsruhe, Germany. The date fell between two related con ferences: "Application of Ion-Beams to Materials" at Warwick, Eng land and "Atomic Collisions in Solids" at Amsterdam, the Nether lands. The first conference on Ion Beam Surface Layer Analysis was held at Yorktown Heights, New York, 1973. The major topic of that and the present conference was the material analysis with ion beams including backscattering and channeling, nuclear reactions and ion induced X-rays with emphasis on technical problems and no vel applications. The increasing interest in this field was docu mented by 7 invited papers and 85 contributions which were presen ted at the meeting in Karlsruhe to about 150 participants from 21 countries. The oral presentations were followed by parallel ses sions on "Fundamental Aspects", "Analytical Problems" and "Appli cations" encouraging detailed discussions on the topics of most current interest. Summaries of these sessions were presented by the discussion leaders to the whole conference. All invited and contributed papers are included in these proceedings; summaries of the discussion sessions will appear in a separate booklet and are availble from the editors. The application of ion beams to material analysis is now well established.