Low Power Low Voltage Analog Circuit Techniques For Wireless Sensors

This research investigates lower-power lower-voltage analog circuit techniques suitable for wireless sensor applications. Wireless sensors have been used in a wide range of applications and will become ubiquitous with the revolution of internet of things (IoT). Due to the demand of low cost, miniature desirable size and long operating cycle, passive wireless sensors which don't require battery are more preferred. Such sensors harvest energy from energy sources in the environment such as radio frequency (RF) waves, vibration, thermal sources, etc. As a result, the obtained energy is very limited. This creates strong demand for low power, lower voltage circuits. The RF and analog circuits in the wireless sensor usually consume most of the power. This motivates the research presented in the dissertation. Specially, the research focuses on the design of a low power high efficiency regulator, low power Resistance to Digital Converter (RDC), low power Successive Approximation Register (SAR) Analog to Digital Converter (ADC) with parasitic error reduction and a low power low voltage Low Dropout (LDO) regulator. This dissertation includes a low power analog circuit design for the RFID wireless sensor which consists of the energy harvest circuits (an optimized rectifier and a regulator with high current efficiency) and a sensor measurement circuit (RDC), a single end sampling SAR ADC with no error induced by the parasitic capacitance and a digital loop LDO whose line and load variation response is improved. These techniques will boost the design of the wireless sensor and they can also be used in other similar low power design.

Analog Circuit Design contains the contribution of 18 tutorials of the 20th workshop on Advances in Analog Circuit Design. Each part discusses a specific to-date topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 20 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of: Topic 1 : Low Voltage Low Power, chairman: Andrea Baschirotto Topic 2 : Short Range Wireless Front-Ends, chairman: Arthur van Roermund Topic 3 : Power Management and DC-DC, chairman : Michiel Steyaert. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.

Low-power sensors and their applications in various fields ranging from military to civilian lives have made tremendous progress in the recent years. Low-power and extended battery life are the key focuses for long term, reliable and easy operation of these sensors. Sensors and Low Power Signal Processing provides a general overview of a sensor’s working principle and a discussion of the emerging sensor technologies including chemical, electro-chemical and MEMS based sensors. Also included is a discussion on design challenges associated with low-power analog circuits and the schemes to overcome them. Finally, a short discussion of some of the simple wireless telemetry schemes best suited for low-power sensor applications and sensor packaging issues is discussed. Applications and sensor prototypes included are environmental monitoring, health care monitoring and issues related to the development of sensor prototypes and associated electronics to achieve high signal-to-noise ratio will also be presented.

This book provides readers with a state-of-the-art description of techniques to be used for ultra-low-power (ULP) and ultra-low-cost (ULC), short-range wireless receivers. Readers will learn what is required to deploy these receivers in short-range wireless sensor networks, which are proliferating widely to serve the internet of things (IoT) for “smart cities.” The authors address key challenges involved with the technology and the typical tradeoffs between ULP and ULC. Three design examples with advanced circuit techniques are described in order to address these trade-offs, which special focus on cost minimization. These three techniques enable respectively, cascading of radio frequency (RF) and baseband (BB) circuits under an ultra-low-voltage (ULV) supply, cascading of RF and BB circuits in current domain for current reuse and a novel function-reuse receiver architecture, suitable for ULV and multi-band ULP applications such as the sub-GHz ZigBee.

Analog Circuit Design contains the contribution of 18 experts from the 13th International Workshop on Advances in Analog Circuit Design. It is number 13 in the successful series of Analog Circuit Design. It provides 18 excellent overviews of analog circuit design in: Sensor and Actuator Interfaces, Integrated High-Voltage Electronics and Power Management, and Low-Power and High-Resolution ADC’s. Analog Circuit Design is an essential reference source for analog circuits designers and researchers wishing to keep abreast with the latest developments in the field. The tutorial coverage also makes it suitable for use in an advanced design course.

This book is based on the 18 invited tutorials presented during the 27th workshop on Advances in Analog Circuit Design. Expert designers from both industry and academia present readers with information about a variety of topics at the frontiers of analog circuit design, including the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers. For anyone involved in the design of analog circuits, this book will serve as a valuable guide to the current state-of-the-art. Provides a state-of-the-art reference in analog circuit design, written by experts from industry and academia; Presents material in a tutorial-based format; Covers the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers.

Johan H. Huijsing This book contains 18 tutorial papers concentrated on 3 topics, each topic being covered by 6 papers. The topics are: Low-Noise, Low-Power, Low-Voltage Mixed-Mode Design with CAD Tools Voltage, Current, and Time References The papers of this book were written by top experts in the field, currently working at leading European and American universities and companies. These papers are the reviewed versions of the papers presented at the Workshop on Advances in Analog Circuit Design. which was held in Villach, Austria, 26-28 April 1995. The chairman of the Workshop was Dr. Franz Dielacher from Siemens, Austria. The program committee existed of Johan H. Huijsing from the Delft University of Technology, Prof.Willy Sansen from the Catholic University of Leuven, and Dr. Rudy 1. van der Plassche from Philips Eindhoven. This book is the fourth of aseries dedicated to the design of analog circuits. The topics which were covered earlier were: Operational Amplifiers Analog to Digital Converters Analog Computer Aided Design Mixed AlD Circuit Design Sensor Interface Circuits Communication Circuits Low-Power, Low-Voltage Integrated Filters Smart Power As the Workshop will be continued year by year, a valuable series of topics will be built up from all the important areas of analog circuit design. I hope that this book will help designers of analog circuits to improve their work and to speed it up.

Analog Circuit Design contains the contribution of 18 tutorials of the 14th workshop on Advances in Analog Circuit Design. Each part discusses a specific todate topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 14 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of analog circuit design, CAD and RF systems. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.

This volume concentrates on three topics: mixed analog--digital circuit design, sensor interface circuits and communication circuits. The book comprises six papers on each topic of a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts. Part I: Mixed Analog--Digital Circuit Design considers the largest growth area in microelectronics. Both standard designs and ASICs have begun integrating analog cells and digital sections on the same chip. The papers cover topics such as groundbounce and supply-line spikes, design methodologies for high-level design and actual mixed analog--digital designs. Part II: Sensor Interface Circuits describes various types of signal conditioning circuits and interfaces for sensors. These include interface solutions for capacitive sensors, sigma--delta modulation used to combine a microprocessor compatible interface with on chip CMOS sensors, injectable sensors and responders, signal conditioning circuits and sensors combined with indirect converters. Part III: Communication Circuits concentrates on systems and implemented circuits for use in personal communication systems. These have applications in cordless telephones and mobile telephone systems for use in cellular networks. A major requirement for these systems is low power consumption, especially when operating in standby mode, so as to maximise the time between battery recharges.

This volume of Analog Circuit Design concentrates on three topics: Low-Power Low-Voltage Design; Integrated Filters, and Smart Power. The book comprises six papers on each topic written by internationally recognised experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts: Part I, Low-Power Low-Voltage Design, describes the latest techniques for producing analog circuits with low-voltage low-power requirements. These circuits have an important role to play in the increasing trend towards portable products, where battery life is an important design factor. The papers cover design techniques for amplifiers, analog-to-digital converters, micro-power analog filters and medical devices. Part II, Integrated Filters, presents papers which detail nearly all known techniques to construct integrated filters. These filters all use resistors and capacitors to obtain the filtering function due to the low quality of inductors in silicon. Integration of the filtering function on chips is important to reduce system cost and provide greater accuracy. Part III, Smart Power, illustrates up-to-date techniques for implementing thermal detectors and protection networks to improve reliability and the lifetime of many analog devices. These devices are more specifically those with different analog blocks operating at different temperatures. Smart Power is thus never limited to circuit design only, but must also include packaging and cooling considerations; it is system design. Analog Circuit Design is an essential reference source for analog design engineers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes the book suitable for use in an advanced course.