Iutam Symposium On Dynamics And Control Of Nonlinear Systems With Uncertainty

This is a state-of-the-art treatise on the problems of both nonlinearity and uncertainty in the dynamics and control of engineering systems. The concept of dynamics and control implies the combination of dynamic analysis and control synthesis. It is essential to gain insight into the dynamics of a nonlinear system with uncertainty if any new control strategy is designed to utilize nonlinearity.

Non-linear stochastic systems are at the center of many engineering disciplines and progress in theoretical research had led to a better understanding of non-linear phenomena. This book provides information on new fundamental results and their applications which are beginning to appear across the entire spectrum of mechanics. The outstanding points of these proceedings are Coherent compendium of the current state of modelling and analysis of non-linear stochastic systems from engineering, applied mathematics and physics point of view. Subject areas include: Multiscale phenomena, stability and bifurcations, control and estimation, computational methods and modelling. For the Engineering and Physics communities, this book will provide first-hand information on recent mathematical developments. The applied mathematics community will benefit from the modelling and information on various possible applications.

The International Union of Theoretical and Applied Mechanics (IUTAM) initiated and sponsored an International Symposium on Nonlinear Dynamics in Engineering Systems held in 1989 in Stuttgart, FRG. The Symposium was intended to bring together scientists working in different fields of dynamics to exchange ideas and to discuss new trends with special emphasis on nonlinear dynamics in engineering systems. A Scientific Committee was appointed by the Bureau of IUTAM with the following members: S. Arimoto (Japan), F.L. Chernousko (USSR), P.J. Holmes (USA), C.S. Hsu (USA), G. looss (France), F.C. Moon (USA), W. Schiehlen (FRG), Chairman, G. Schmidt (GDR), W. Szemplinska-Stupnicka (Poland), J.M.T. Thompson (UK), H. Troger (Austria). This committee selected the participants to be invited and the papers to be presented at the Symposium. As a result of this procedure 78 active scientific participants from 22 countries followed the invitation, and 44 papers were presented in lecture and poster sessions. They are collected in this volume. At the Symposium an exhibition with experiments took place and the movie "An Introduction to the Analysis of Chaotic Dynamics" by E.J. Kreuzer et.al. was presented. The scientific lectures were devoted to the following topics: o Dynamic Structural Engineering Problems, o Analysis of Nonlinear Dynamic Systems, o Bifurcation Problems, o Chaotic Dynamics and Control Problems, o Miscellaneous Problems, o Experimental and Theoretical Investigations, o Chaotic Oscillations of Engineering Systems, o Characterization of Nonlinear Dynamic Systems, o Nonlinear Stochastic Systems.

This is the proceedings of the IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems that was held in Novi Sad, Serbia, from July 15th to 19th, 2018. The appearance of nonlinear phenomena used to be perceived as dangerous, with a general tendency to avoid them or control them. This perception has led to intensive research using various approaches and tailor-made tools developed over decades. However, the Nonlinear Dynamics of today is experiencing a profound shift of paradigm since recent investigations rely on a different strategy which brings good effects of nonlinear phenomena to the forefront. This strategy has a positive impact on different fields in science and engineering, such as vibration isolation, energy harvesting, micro/nano-electro-mechanical systems, etc. Therefore, the ENOLIDES Symposium was devoted to demonstrate the benefits and to unlock the potential of exploiting nonlinear dynamical behaviour in these but also in other emerging fields of science and engineering. This proceedings is useful for researchers in the fields of nonlinear dynamics of mechanical systems and structures, and in Mechanical and Civil Engineering.

The Symposium brought together many of the world’s experts in fluid mechanics, microfabrication and control theory to discover the synergy that can lead to real advances and perhaps find ways in which collaborative projects may proceed. The high profile meeting was attended by keynote speakers who are leaders in their fields. A key driver was the improvement in flow efficiency to reduce drag, and thereby emissions arising from transport. About 65 papers were presented.

This volume contains the proceedings of the IUTAM Symposium on Computational Physics and New Perspectives in Turbulence, held at Nagoya University, Nagoya, Japan, in September 2006. With special emphasis given to fundamental aspects of the physics of turbulence, coverage includes experimental approaches to fundamental problems in turbulence, turbulence modeling and numerical methods, and geophysical and astrophysical turbulence.

The interest of the applied mechanics community in chaotic dynamics of engineering systems has exploded in the last fifteen years, although research activity on nonlinear dynamical problems in mechanics started well before the end of the Eighties. It developed first within the general context of the classical theory of nonlinear oscillations, or nonlinear vibrations, and of the relevant engineering applications. This was an extremely fertile field in terms of formulation of mechanical and mathematical models, of development of powerful analytical techniques, and of understanding of a number of basic nonlinear phenomena. At about the same time, meaningful theoretical results highlighting new solution methods and new or complex phenomena in the dynamics of deterministic systems were obtained within dynamical systems theory by means of sophisticated geometrical and computational techniques. In recent years, careful experimental studies have been made to establish the actual occurrence and observability of the predicted dynamic phenomena, as it is vitally needed in all engineering fields. Complex dynamics have been shown to characterize the behaviour of a great number of nonlinear mechanical systems, ranging from aerospace engineering applications to naval applications, mechanical engineering, structural engineering, robotics and biomechanics, and other areas. The International Union of Theoretical and Applied Mechanics grasped the importance of such complex phenomena in the Eighties, when the first IUTAM Symposium devoted to the general topic of nonlinear and chaotic dynamics in applied mechanics and engineering was held in Stuttgart (1989).

This book presents the latest research results in the area of applied nonlinear dynamics and chaos theory. Papers by three academic generations address new applications of nonlinear dynamics to mechanics, including fluid-structure interaction, machining and mechanics of solids, and many other applications.

The increasing necessity to solve complex problems in Structural Dynamics and Earthquake Engineering requires the development of new ideas, innovative methods and numerical tools for providing accurate numerical solutions in affordable computing times. This book presents the latest scientific developments in Computational Dynamics, Stochastic Dynam

1. Introduction. 1.1. Motivation. 1.2. Background. 1.3. Scope of this document. 1.4. Original contributions -- 2. Solutions of systems of DDEs via the matrix Lambert W function. 2.1. Introduction. 2.2. Free systems of DDEs. 2.3. Forced systems. 2.4. Approach using the Laplace transformation. 2.5. Concluding remarks -- 3. Stability of systems of DDEs via the Lambert W function with application to machine tool chatter. 3.1. Introduction. 3.1. The Chatter equation in the turning process. 3.3. Solving DDEs and stability. 3.4. Concluding remarks -- 4. Controllability and observability of systems of linear delay differential equations via the matrix Lambert W function. 4.1. Introduction. 4.2. Controllability. 4.3. Observability. 4.4. Illustrative example. 4.5. Conclusions and future work -- 5. Eigenvalue assignment via the Lambert W function for control of time-delay systems. 5.1. Introduction. 5.2. Eigenvalue assignment for time-delay systems. 5.3. Design of a feedback Controller. 5.4. Conclusions -- 6. Robust control and time-domain specifications for systems of delay differential equations via eigenvalue assignment. 6.1. Introduction. 6.2. Robust feedback. 6.3. Time-domain specifications. 6.4. Concluding remarks -- 7. Design of observer-based feedback control for time-delay systems with application to automotive powertrain control. 7.1. Introduction. 7.2. Problem formulation. 7.3. Design of observer-based feedback controller. 7.4. Application to diesel engine control. 7.5. Conclusions -- 8. Eigenvalues and sensitivity analysis for a model of HIV pathogenesis with an intracellular delay. 8.1. Introduction. 8.2. HIV pathogenesis dynamic model with an intracellular delay. 8.3. Rightmost eigenvalue analysis. 8.4. Sensitivity analysis. 8.5. Concluding remarks and future work