Intelligent Cad Systems Ii

Records of the 2nd Eurographics Workshop on "Intelligent CAD Systems", Held on April 19-23, 1988, at Konigshof Congress Centre, Veldhoven, the Netherlands

This book contains a selection of revised versions of papers presented at the Third Eurographics Workshop on Intelligent CAD Systems, which was held at Hotel Opduin on the island of Texel in The Netherlands, April 3-7, 1989. The workshop theme was Practical Experience and Evaluation. It included five paper presentation sessions, each followed by a discussion. The workshop closed with a general discussion. The book is therefore divided into five parts: design process, system architecture, languages, geometric reasoning, and user interface. A report on the discussion session, written by the session's moderator, concludes each part. These reports are not intended to be exact records of the discussion, but rather the moderators' summary of their contents. The aim of the workshop was to share the experience the participants gained by developing intelligent CAD (Computer Aided Design) systems, and to evaluate the developed systems to determine which features were still lacking. The workshop was organized as the last one in a series of three workshops under the same title. The first workshop focused on theoretical and methodological aspects, resulting in a sound theoretical basis for intelligent CAD systems. Implementational issues were discussed at the second workshop, paying attention to systems developed with reference to this basis. The experience and evaluation showed a dual outcome. Firstly, it resulted in the development of a new generation of intelligent CAD systems. Secondly, it led us to the development of new theories for intelligent CAD.

CAD (Computer Aided Design) technology is now crucial for every division of modern industry, from a viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that engineers have to deal with is constantly increasing. This results in seeking more advanced computer technology to achieve higher functionalities, flexibility, and efficient performance of the CAD systems. Knowledge engineering, or more broadly artificial intelligence, is considered a primary candidate technology to build a new generation of CAD systems. Since design is a very intellectual human activity, this approach seems to make sense. The ideas of intelligent CAD systems (ICAD) are now increasingly discussed everywhere. We can observe many conferences and workshops reporting a number of research efforts on this particular subject. Researchers are coming from computer science, artificial intelligence, mechanical engineering, electronic engineering, civil engineering, architectural science, control engineering, etc. But, still we cannot see the direction of this concept, or at least, there is no widely accepted concept of ICAD. What can designers expect from these future generation CAD systems? In which direction must developers proceed? The situation is somewhat confusing.

CAD (Computer Aided Design) technology is now crucial for every division of modern industry, from a viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that engineers have to deal with is constantly increasing. This results in seeking more advanced computer technology to achieve higher functionalities, flexibility, and efficient performance of the CAD systems. Knowledge engineering, or more broadly artificial intelligence, is considered a primary candidate technology to build a new generation of CAD systems. Since design is a very intellectual human activity, this approach seems to make sense. The ideas of intelligent CAD systems (ICAD) are now increasingly discussed everywhere. We can observe many conferences and workshops reporting a number of research efforts on this particular subject. Researchers are coming from computer science, artificial intelligence, mechanical engineering, electronic engineering, civil engineering, architectural science, control engineering, etc. But, still we cannot see the direction of this concept, or at least, there is no widely accepted concept of ICAD. What can designers expect from these future generation CAD systems? In which direction must developers proceed? The situation is somewhat confusing.

Agent Technology, or Agent-Based Approaches, is a new paradigm for developing software applications. It has been hailed as 'the next significant breakthrough in software development', and 'the new revolution in software' after object technology or object-oriented programming. In this context, an agent is a computer system which is capable of act

This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.

This five-volume set clearly manifests the great significance of these key technologies for the new economies of the new millennium. The discussions provide a wealth of practical ideas intended to foster innovation in thought and, consequently, in the further development of technology. Together, they comprise a significant and uniquely comprehensive reference source for research workers, practitioners, computer scientists, academics, students, and others on the international scene for years to come.