Fundamentals Of Shock Wave Propagation In Solids

My intent in writing this book is to present an introduction to the thermo- chanical theory required to conduct research and pursue applications of shock physics in solid materials. Emphasis is on the range of moderate compression that can be produced by high-velocity impact or detonation of chemical exp- sives and in which elastoplastic responses are observed and simple equations of state are applicable. In the interest of simplicity, the presentation is restricted to plane waves producing uniaxial deformation. Although applications often - volve complex multidimensional deformation fields it is necessary to begin with the simpler case. This is also the most important case because it is the usual setting of experimental research. The presentation is also restricted to theories of material response that are simple enough to permit illustrative problems to be solved with minimal recourse to numerical analysis. The discussions are set in the context of established continuum-mechanical principles. I have endeavored to define the quantities encountered with some care and to provide equations in several convenient forms and in a way that lends itself to easy reference. Thermodynamic analysis plays an important role in continuum mechanics, and I have included a presentation of aspects of this subject that are particularly relevant to shock physics. The notation adopted is that conventional in expositions of modern continuum mechanics, insofar as possible, and variables are explained as they are encountered. Those experienced in shock physics may find some of the notation unconventional.

My intent in writing this book is to present an introduction to the thermo- chanical theory required to conduct research and pursue applications of shock physics in solid materials. Emphasis is on the range of moderate compression that can be produced by high-velocity impact or detonation of chemical exp- sives and in which elastoplastic responses are observed and simple equations of state are applicable. In the interest of simplicity, the presentation is restricted to plane waves producing uniaxial deformation. Although applications often - volve complex multidimensional deformation fields it is necessary to begin with the simpler case. This is also the most important case because it is the usual setting of experimental research. The presentation is also restricted to theories of material response that are simple enough to permit illustrative problems to be solved with minimal recourse to numerical analysis. The discussions are set in the context of established continuum-mechanical principles. I have endeavored to define the quantities encountered with some care and to provide equations in several convenient forms and in a way that lends itself to easy reference. Thermodynamic analysis plays an important role in continuum mechanics, and I have included a presentation of aspects of this subject that are particularly relevant to shock physics. The notation adopted is that conventional in expositions of modern continuum mechanics, insofar as possible, and variables are explained as they are encountered. Those experienced in shock physics may find some of the notation unconventional.

This book is the first of several volumes on solids in the Shock Wave Science and Technology Reference Library. This is a unique collection, and the library as a whole sets out to comprehensively and authoritatively cover and review at research level the subject matter with all its ramifications. All the chapters are self-contained and can be read independently of each other, though they are of course thematically interrelated.

This book is the second volume of Solids Volumes in theShockWaveScience and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation and hi- velocity impact and penetration events. This volume contains four articles. The ?rst two describe the reactive behavior of condensed-phase explosives, and the remaining two discuss the inert, mechanical response of solid materials. The articles are each se- contained, and can be read independently of each other. They o?er a timely reference, for beginners as well as professional scientists and engineers, cov- ing the foundations and the latest progress, and include burgeoning devel- ment as well as challenging unsolved problems. The ?rst chapter, by S. She?eld and R. Engelke, discusses the shock initiation and detonation phenomena of solids explosives. The article is an outgrowth of two previous review articles: “Explosives” in vol. 6 of En- clopedia of Applied Physics (VCH, 1993) and “Initiation and Propagation of Detonation in Condensed-Phase High Explosives” in High-Pressure Shock Compression of Solids III (Springer, 1998). This article is not only an - dated review, but also o?ers a concise heuristic introduction to shock waves and condensed-phase detonation. The authors emphasize the point that d- onation is not an uncontrollable, chaotic event, but that it is an orderly event that is governed by and is describable in terms of the conservation of mass, momentum, energy and certain material-speci?c properties of the explosive.

This book presents a set of basic understandings of the behavior and response of solids to propagating shock waves. The propagation of shock waves in a solid body is accompanied by large compressions, decompression, and shear. Thus, the shear strength of solids and any inelastic response due to shock wave propagation is of the utmost importance. Furthermore, shock compres sion of solids is always accompanied by heating, and the rise of local tempera ture which may be due to both compression and dissipation. For many solids, under a certain range of impact pressures, a two-wave structure arises such that the first wave, called the elastic prescursor, travels with the speed of sound; and the second wave, called a plastic shock wave, travels at a slower speed. Shock-wave loading of solids is normally accomplished by either projectile impact, such as produced by guns or by explosives. The shock heating and compression of solids covers a wide range of temperatures and densities. For example, the temperature may be as high as a few electron volts (1 eV = 11,500 K) for very strong shocks and the densification may be as high as four times the normal density.

A bibliography has been compiled on shock wave propagation in solids. The effects of explosive blast waves and/or hypervelocity impact on plastic, viscoelastic, and elastoplastic solids have also been included. A detailed subject index is provided. (Author).

This book presents a set of basic understandings of the behavior and response of solids to propagating shock waves. The propagation of shock waves in a solid body is accompanied by large compressions, decompression, and shear. Thus, the shear strength of solids and any inelastic response due to shock wave propagation is of the utmost importance. Furthermore, shock compres sion of solids is always accompanied by heating, and the rise of local tempera ture which may be due to both compression and dissipation. For many solids, under a certain range of impact pressures, a two-wave structure arises such that the first wave, called the elastic prescursor, travels with the speed of sound; and the second wave, called a plastic shock wave, travels at a slower speed. Shock-wave loading of solids is normally accomplished by either projectile impact, such as produced by guns or by explosives. The shock heating and compression of solids covers a wide range of temperatures and densities. For example, the temperature may be as high as a few electron volts (1 eV = 11,500 K) for very strong shocks and the densification may be as high as four times the normal density.

The Handbook of Shock Waves contains a comprehensive, structured coverage of research topics related to shock wave phenomena including shock waves in gases, liquids, solids, and space. Shock waves represent an extremely important physical phenomena which appears to be of special practical importance in three major fields: compressible flow (aerodynamics), materials science, and astrophysics. Shock waves comprise a phenomenon that occurs when pressure builds to force a reaction, i.e. sonic boom that occurs when a jet breaks the speed of sound.This Handbook contains experimental, theoretical, and numerical results which never before appeared under one cover; the first handbook of its kind.The Handbook of Shock Waves is intended for researchers and engineers active in shock wave related fields. Additionally, R&D establishments, applied science & research laboratories and scientific and engineering libraries both in universities and government institutions. As well as, undergraduate and graduate students in fluid mechanics, gas dynamics, and physics. Key Features* Ben-Dor is known as one of the founders of the field of shock waves* Covers a broad spectrum of shock wave research topics* Provides a comprehensive description of various shock wave related subjects* First handbook ever to include under one separate cover: experimental, theoretical, and numerical results

Stress Waves in Non-Elastic Solids is a comprehensive presentation of the principles underlying the propagation of stress waves in non-elastic solids, with emphasis on wave problems in the theory of plasticity. This book exposes wave propagation problems for a range of material responses and justifies the hypotheses introduced in specialized theories and the simplifications made in the analysis of particular problems. Both analytical and numerical methods of solving problems are described, and a large number of solutions to specific problems of wave propagation in inelastic solids are given. This book is comprised of six chapters and begins with an overview of the fundamental equations of the dynamics of inelastic media. The dynamical properties of metals and soils are discussed, offering an account of the most representative theories of plasticity and viscoplasticity. The next chapter considers the basic definitions of discontinuity surfaces and the conditions that must to be satisfied across these surfaces. Certain mathematical fundamentals are given, referring to systems of differential equations, quasi-linear and semi-linear, of the first order. Initial and boundary value problems for hyperbolic equations are also formulated. The remaining chapters focus on methods of solving stress wave propagation problems, including one-dimensional plane waves and longitudinal-transverse waves. Wave propagation problems for elastic-plastic and elastic/viscoplastic media are treated in detail, along with the most important problem of shock waves in metals and soils. The last chapter deals with thermal wave propagation problems. This monograph will be a valuable resource for students and practitioners of engineering, physics, and mathematics.