Friction Stir Welding Of Dissimilar Alloys And Materials

This book will summarize research work carried out so far on dissimilar metallic material welding using friction stir welding (FSW). Joining of dissimilar alloys and materials are needed in many engineering systems and is considered quite challenging. Research in this area has shown significant benefit in terms of ease of processing, material mixing, and superior mechanical properties such as joint efficiencies. A summary of these results will be discussed along with potential guidelines for designers. Explains solid phase process and distortion of work piece Addresses dimensional stability and repeatability Addresses joint strength Covers metallurgical properties in the joint area Covers fine microstructure Introduces improved materials use (e.g., joining different thicknesses) Covers decreased fuel consumption in light weight aircraft Addresses automotive and ship applications

This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.

The evolution of mechanical properties and its characterization is important to the weld quality whose further analysis requires mechanical property and microstructure correlation. Present book addresses the basic understanding of the Friction Stir Welding (FSW) process that includes effect of various process parameters on the quality of welded joints. It discusses about various problems related to the welding of dissimilar aluminium alloys including influence of FSW process parameters on the microstructure and mechanical properties of such alloys. As a case study, effect of important process parameters on joint quality of dissimilar aluminium alloys is included.

Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP

This collection focuses on all aspects of science and technology related to friction stir welding and processing.

This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.

This thesis focuses on the friction stir welding (FSW) between similar and dissimilar alloys. FSW is a solid state joining process that welds the work-pieces through a combination of heat generated by friction and mechanical stirring of the metals in the region of the joint. Being a solid state process, FSW can be used to weld alloys with significantly different melting points. This provides a significant benefit over traditional fusion welding process in a variety of applications in automotive, biomedical, aerospace, nuclear and petroleum industries.Two materials - an aluminum alloy (6061-T6, m.p. 582 - 652°C) and a steel (SAE 1018, m.p. 1480°C) are the primary focus of this research. An end mill was modified to perform friction stir welding, and several tool designs made from H13 steel, A2 steel and tungsten carbide were investigated. The tool tilt angle, rotation speed, and travel speed were the primary welding parameters which considered. Rockwell hardness, tension, and 4- point bending tests were conducted to evaluate the mechanical properties of the welded samples as well as the microstructure test.Results show that in the as-welded condition there is a considerable decrease in the strength and hardness of the aluminum alloy in the joint region. This can be attributed to over-aging of the aluminum alloy due to the heat generated by the joining process. However, standard T6 heat treatment restores the mechanical properties of the aluminum -aluminum joint, and improves the mechanical properties of the aluminum-steel joint. This demonstrated the feasibility of FSW for joining both similar and dissimilar metals.

The combination of distinct materials is a key issue in modern industry, whereas the driving concept is to design parts with the right material in the right place. In this framework, a great deal of attention is directed towards dissimilar welding and joining technologies. In the automotive sector, for instance, the concept of “tailored blanks”, introduced in the last decade, has further highlighted the necessity to weld dissimilar materials. As far as the aeronautic field is concerned, most structures are built combining very different materials and alloys, in order to match lightweight and structural performance requirements. In this framework, the application of fusion welding techniques, namely, tungsten inert gas or laser welding, is quite challenging due to the difference in physical properties, in particular the melting point, between adjoining materials. On the other hand, solid-state welding methods, such as the friction stir welding as well as linear friction welding processes, have already proved to be capable of manufacturing sound Al-Cu, Al-Ti, Al-SS, and Al-Mg joints, to cite but a few. Recently, promising results have also been obtained using hybrid methods. Considering the novelty of the topic, many relevant issues are still open, and many research groups are continuously publishing valuable results. The aim of this book is to finalize the latest contributions on this topic.

This collection presents fundamentals and the current status of friction stir welding (FSW) and solid-state friction stir processing of materials and provides researchers and engineers with an opportunity to review the current status of the friction stir related processes and discuss the future possibilities. Contributions cover various aspects of friction stir welding and processing including their derivative technologies. Topics include, but are not limited to: • Derivative technologies • High-temperature applications • Industrial applications • Dissimilar alloys and/or materials • Lightweight alloys • Simulation • Characterization • Non-destructive examination techniques

Friction stir welding (FSW) is a highly important and recently developed joining technology that produces a solid phase bond. It uses a rotating tool to generate frictional heat that causes material of the components to be welded to soften without reaching the melting point and allows the tool to move along the weld line. Plasticized material is transferred from the leading edge to trailing edge of the tool probe, leaving a solid phase bond between the two parts. Friction stir welding: from basics to applications reviews the fundamentals of the process and how it is used in industrial applications.Part one discusses general issues with chapters on topics such as basic process overview, material deformation and joint formation in friction stir welding, inspection and quality control and friction stir welding equipment requirements and machinery descriptions as well as industrial applications of friction stir welding. A chapter giving an outlook on the future of friction stir welding is included in Part one. Part two reviews the variables in friction stir welding including residual stresses in friction stir welding, effects and defects of friction stir welds, modelling thermal properties in friction stir welding and metallurgy and weld performance.With its distinguished editors and international team of contributors, Friction stir welding: from basics to applications is a standard reference for mechanical, welding and materials engineers in the aerospace, automotive, railway, shipbuilding, nuclear and other metal fabrication industries, particularly those that use aluminium alloys. Provides essential information on topics such as basic process overview, materials deformation and joint formation in friction stir welding Inspection and quality control and friction stir welding equipment requirements are discussed as well as industrial applications of friction stir welding Reviews the variables involved in friction stir welding including residual stresses, effects and defects of friction stir welds, modelling thermal properties, metallurgy and weld performance