Fatigue Design Esis 16

A compilation of research in fatigue design, prediction, and assessment Fatigue Design is a collection of research presented at the 1993 International Symposium on Fatigue Design. Detailing the latest findings and most current research, this book features papers on a variety of pertinent topics, including the quantification of service load for fatigue life predictions, identification of stress states and failure modes, assessment of residual life in damaged components, and more. Special attention is paid to the need for simple and reliable prediction tools to help better ensure adequate strength at the design stage.

This volume contains a selection of papers presented at Fatigue Design 95 held in Helsinki, Finland from 5-8 September 1995. The papers have been peer reviewed and present practical aspects for the design of components and structures to avoid fatigue failure. Topics covered include: fatigue design experiences, ground vehicle components, component reliability, multiaxial fatigue, notch analysis, service loading, welded structures, probabilistics aspects in fatigue, fatigue design optimization.

This volume represents a selection of papers presented at the Third International Symposium on Fatigue Design, Fatigue Design 1998, held in Espoo, Finland, 26-29 May, 1998. One objective of this symposium series was to help bridge the gap that sometimes exists between researchers and engineers responsible for designing components against fatigue failure. The 21 selected papers provide an up-to-date survey of engineering practice and a preview of design methods that are advancing toward application. Reliability was selected as a key theme for FD'98. During the design of components and structures, it is not sufficient to combine mean material properties, average usage parameters, and pre-selected safety factors. The engineer must also consider potential scatter in material properties, different end users, manufacturing tolerances and uncertainties in fatigue damage models. Judgement must also be made about the consequences of potential failure and the required degree of reliability for the structure or component during its service life. Approaches to ensuring reliability may vary greatly depending on the structure being designed. Papers in this volume intentionally provide a multidisciplinary perspective on the issue. Authors represent the ground vehicle, heavy equipment, power generation, ship building and other industries. Identical solutions cannot be used in all cases because design methods must always provide a balance between accuracy and simplicity. The point of balance will shift depending on the type of input data available and the component being considered.

The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.

This book contains 15 fully peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture and is a companion to the CD-ROM http://www.elsevier.com/locate/isbn/008043701xProceedings. The organisers of the ECF 13 opted from the very beginning for an application-orientated conference, and consequently, this book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a wide range of fields. The fields covered in this book can be broadly classified into: elastic-plastic fracture mechanics, fracture dynamics, fatigue and interactive processes, failure, structural integrity, coatings and materials, with applications to the following industrial sectors: transport, aerospace engineering, civil engineering, pipelines and automotive engineering.

This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growth Most papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.

This volume contains a selection of peer-reviewed papers presented at the International Conference on Temperature-Fatigue Interaction, held in Paris, May 29-31, 2001, organised by the Fatigue Committee of the Societé Française de Métallurgie et de Matériaux (SF2M), under the auspices of the European Structural Integrity Society. The conference disseminated recent research results and promoting the interaction and collaboration amongst materials scientists, mechanical engineers and design engineers. Many engineering components and structures used in the automotive, aerospace, power generation and many other industries experience cyclic mechanical loads at high temperature or temperature transients causing thermally induced stresses. The increase of operating temperature and thermal mechanical loading trigger the interaction with time-dependent phenomena such as creep and environmental effects (oxidation, corrosion). A large number of metallic materials were investigated including aluminium alloys for the automotive industry, steels and cast iron for the automotive industry and materials forming, stainless steels for power plants, titanium, composites, intermetallic alloys and nickel base superalloys for aircraft industry, polymers. Important progress was observed in testing practice for high temperature behaviour, including environment and thermo-mechanical loading as well as in observation techniques. A large problem which was emphasized is to know precisely service loading cycles under non-isothermal conditions. This was considered critical for numerous thermal fatigue problems discussed in this conference.

This book is an overview of ESIS Technical Committee 4's activities since the mid-1980s. A wide range of tests is described and the numerous authors is a reflection of the wide and enthusiastic support we have had. With the establishment of the Technical Committee 4, two major areas were identified as appropriate for the activity. Firstly there was an urgent need for standard, fracture mechanics based, test methods to be designed for polymers and composites. A good deal of academic work had been done, but the usefulness to industry was limited by the lack of agreed standards. Secondly there was a perceived need to explore the use of such data in the design of plastic parts. Some modest efforts were made in early meetings to explore this, but little progress was made. In contrast things moved along briskly in the standards work and this has dominated the activity for the last fourteen years. The design issue remains a future goal.

Application of Fracture Mechanics to Polymers, Adhesives and Composites