Equilibrium Structure And Properties Of Surfaces And Interfaces

It is almost self-evident that surface and interface science, coupled with the electronic structure of bulk materials, playa fundamental role in the understanding of materials properties. If one is to have any hope of understanding such properties as catalysis, microelectronic devices and contacts, wear, lubrication, resistance to corrosion, ductility, creep, intragranular fracture, toughness and strength of steels, adhesion of protective oxide scales, and the mechanical properties of ceramics, one must address a rather complex problem involving a number of fundamental parameters: the atomic and electronic structure, the energy and chemistry of surface and interface regions, diffusion along and across interfaces, and the response of an interface to stress. The intense need to gain an understanding of the properties of surfaces and interfaces is amply attested to by the large number of conferences and workshops held on surface and interface science. Because of this need, the fields of surface and interface science have been established in their own right, although their development presently lags behind that of general materials science associated with bulk, translationally invariant systems. There are good reasons to expect this situation to change rather dramatically in the next few years. Existing techniques for investigating surfaces and interfaces have reached maturity and are increasingly being applied to systems of practical relevance. New techniques are still being created, which drastically widen the scope of applicability of surface and interface studies. On the experimental side, new microscopies are bearing fruit.

It is almost self-evident that surface and interface science, coupled with the electronic structure of bulk materials, playa fundamental role in the understanding of materials properties. If one is to have any hope of understanding such properties as catalysis, microelectronic devices and contacts, wear, lubrication, resistance to corrosion, ductility, creep, intragranular fracture, toughness and strength of steels, adhesion of protective oxide scales, and the mechanical properties of ceramics, one must address a rather complex problem involving a number of fundamental parameters: the atomic and electronic structure, the energy and chemistry of surface and interface regions, diffusion along and across interfaces, and the response of an interface to stress. The intense need to gain an understanding of the properties of surfaces and interfaces is amply attested to by the large number of conferences and workshops held on surface and interface science. Because of this need, the fields of surface and interface science have been established in their own right, although their development presently lags behind that of general materials science associated with bulk, translationally invariant systems. There are good reasons to expect this situation to change rather dramatically in the next few years. Existing techniques for investigating surfaces and interfaces have reached maturity and are increasingly being applied to systems of practical relevance. New techniques are still being created, which drastically widen the scope of applicability of surface and interface studies. On the experimental side, new microscopies are bearing fruit.

The Army Materials and Mechanics Research Center has conducted the Sagamore Army Materials Research Conferences, in cooperation with the Metallurgical Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse University, since 1954. The purpose of the conferences has been to gather together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific corr.munity. This volume, Surfaces and Interfaces ll: Physical and Mechanical Properties, can be considered a continuation, or perhaps an extension, of the information contained in Surfaces and Interfaces I: Chemical and Physical Characteristics. The emphasis in this volume is focused on: the technological significance of surfaces and interfaces; surface sensitive mechanical properties; environment-sensitive properties; control of grain structure; and composite materials. It is felt that the rather ambitious undertaking of the program committee to place the role of "surfaces and interfaces" in its proper context has been achieved. The balance between basic research findings and more applied research allows the reader a certain degree of latitude in the use of the two volumes. The continued active interest and support of these conferences by Col. C. T. Riordan, Commanding Officer, Dr. E. Scala, Technical Di rector, and J. F. Sullivan, Deputy Technical Director, of the Army Materials and Mechanics Research Center is appreciated.

This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.

Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces

Understanding the structural and thermodynamic properties of surfaces, interfaces, and membranes is important for both fundamental and practical reasons. Important applications include coatings, dispersants, encapsulating agents, and biological materials. Soft materials, important in the development of new materials and the basis of many biological systems, cannot be designed using trial and error methods due to the multiplicity of components and parameters. While these systems can sometimes be analyzed in terms of microscopic mixtures, it is often conceptually simpler to regard them as dispersions and to focus on the properties of the internal interfaces found in these systems. The basic physics centers on the properties of quasi-two-dimensional systems embedded in the three-dimensional world, thus exhibiting phenomena that do not exist in bulk materials. This approach is the basis behind the theoretical presentation of Statistical Thermodynamics of Surfaces, Interfaces, and Membranes. The approach adapted allows one to treat the rich diversity of phenomena investigated in the field of soft matter physics (including both colloid/interface science as well as the materials and macromolecular aspects of biological physics) such as interfacial tension, the roughening transition, wetting, interactions between surfaces, membrane elasticity, and self-assembly. Presented as a set of lecture notes, this book is aimed at physicists, physical chemists, biological physicists, chemical engineers, and materials scientists who are interested in the statistical mechanics that underlie the macroscopic, thermodynamic properties of surfaces, interfaces, and membranes. This paperback edition contains all the material published in the original hard-cover edition as well as additional clarifications and explanations.

This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world

Since the publication of the first edition of Interfacial Phenomena, the interest in interfaces and surfactants has multiplied, along with their applications. Experimental and theoretical advances have provided scientists with greater insight into the structure, properties, and behavior of surfactant and colloid systems. Emphasizing equil

Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Semiconductor Surfaces and Interfaces deals with structural and electronic properties of semiconductor surfaces and interfaces. The first part introduces the general aspects of space-charge layers, of clean-surface and adatom-included surfaces states, and of interface states. It is followed by a presentation of experimental results on clean and adatom-covered surfaces which are explained in terms of simple physical and chemical concepts and models. Where available, results of more refined calculations are considered. A final chapter is devoted to the band lineup at semiconductor interfaces.