Diy Loudspeaker Building 2nd Edition

With this book, anyone can become a speaker builder. You don't need an elaborate workshop, expensive analytical equipment, or sophisticted software. Learn the concepts you need or chhose any of the eleven tested and proven speaker designs included in the book. Contains all the information the speaker builder needs to design and build a first-rate system, one that surpasses higher-cost commercial products.

Here's a book on building your own speakers that's packed with great new ideas. Building a pair of underfloor 15-inch subwoofers for your home, integrating quality ported enclosures into your walls or ceiling - even developing your own spherical-shaped hi-fi speakers. There's also coverage of software to design speaker enclosures, to determine the specs of second-hand or unknown drivers, and to measure the performance of your new speakers. Here are ideas that you can take and apply for yourself, without needing to buy expensive brand-name drivers or have high-level woodworking skills. Practical and down to earth, the 68 large-format pages are packed with content - nearly 150 full colour photos showing step-by-step construction, and the projects start from just a few dollars. This second edition adds extended coverage on testing speakers, how to obtain quality loudspeaker drivers at low cost, how to cheaply adjust tweeter levels, and building a subwoofer from pre-built enclosures. Read this book and start building quality speakers today!

Introduction to Loudspeaker Design is written for students, technicians, engineers and hobbyists seeking an overview of the technology of loudspeakers. Starting with a brief history of audio developments the book begins by introducing the concepts of frequency, pitch and loudness and proceeds to develop the idea of a loudspeaker as a system. The book covers such topics as loudspeaker design tradeoffs, spatial loading, diffraction loss, cavity effect and enclosure construction. A complete chapter is devoted to the subject of crossover design including design equations. The second edition adds a new chapter on simulation and analysis which includes design equations for closed and vented type speakers. The appendices contain technical references, design aids, glossaries and a chart depicting 18 different loudspeaker enclosure types. The author is a physicist/audio design engineer with over 35 years experience in the research and development of audio products spanning both hardware and software. His WinSpeakerz, TrueRTA and DATS software applications are widely used throughout the audio industry as tools for simulating and measuring loudspeaker performance. Captain Murphy served as a space systems analyst for NORAD during his military career. Changes for the Second Edition: The second edition brings new material and polishes the first edition with many new or improved illustrations. Chapter 2 was expanded with the second half split into a new Chapter 3 titled "Speaker Response Functions." The discussion of Thiele-Small parameters has been expanded and now covers small-signal parameters vs. large-signal parameters as it explores the role of the test signal level in parameter measurement. The crossover design chapter has been expanded to include formulas for calculating component values for the most popular crossover types. Equations have been added for calculating impedance compensation and attenuation networks. The old Chapter 7 FAQ material was integrated into other chapters as appropriate. A new Chapter 8 titled "Loudspeaker Simulation" has been added and introduces loudspeaker equivalent circuit analysis with equations for calculating the magnitude and phase responses of closed and vented loudspeaker systems. Additional design equations are introduced and then examples are given for calculating the responses of a closed box and a vented box loudspeaker. Detailed design equation summaries are given for closed and vented boxes. Appendix C was added to provide a glossary of symbols and a glossary of terms. The box type charts were moved to Appendix D.

Loudspeakers: For Music Recording and Reproduction, Second Edition is a comprehensive guide, offering the tools and understanding needed to cut out the guesswork from loudspeaker choice and set-up. Philip Newell and Keith Holland, with the assistance of Sergio Castro and Julius Newell, combine their years of experience in the design, application, and use of loudspeakers to cover a range of topics from drivers, cabinets, and crossovers, to amplifiers, cables, and surround sound. Whether using loudspeakers in a recording studio, mastering facility, broadcasting studio, film post-production facility, home, or musician’s studio, or if you simply aspire to improve your music-production system this book will help you make the right decisions. This new edition provides significant updates on the topics of digital control, calibration, and cinema loudspeaker systems.

Design and build customized, professional-quality speakers. From drivers to crossovers and custom enclosures, the possibilities for designing speakers that will provide the best possible performance are endless. Great Sound Stereo Speakers Manual, Second Edition, by David Weems and G.R. Koonce, eliminates much of the guesswork--not to mention the ripping out of parts and trying of alternative values--associated with proper design. More than a normal revision, this edition is virtually a new book, with a solution to an old problem, crossover design. This reader-friendly guide puts equipment-enhancing, computer-aided design techniques at your disposal. You get six complete projects, with lucid illustrated instructions for modifying and testing designs, along with 24 proposed projects. The CD-ROM packaged with the book gives you system design software, crossover network design applications, and files for all project drivers, allowing you to alter a project to fit a different physical arrangement of the drivers, explore driver substitution, perform driver tests, simulate box and network design, or customize the included projects.

"A hands-on primer for the new electronics enthusiast"--Cover.

A single dramatic software failure can cost a company millions of dollars - but can be avoided with simple changes to design and architecture. This new edition of the best-selling industry standard shows you how to create systems that run longer, with fewer failures, and recover better when bad things happen. New coverage includes DevOps, microservices, and cloud-native architecture. Stability antipatterns have grown to include systemic problems in large-scale systems. This is a must-have pragmatic guide to engineering for production systems. If you're a software developer, and you don't want to get alerts every night for the rest of your life, help is here. With a combination of case studies about huge losses - lost revenue, lost reputation, lost time, lost opportunity - and practical, down-to-earth advice that was all gained through painful experience, this book helps you avoid the pitfalls that cost companies millions of dollars in downtime and reputation. Eighty percent of project life-cycle cost is in production, yet few books address this topic. This updated edition deals with the production of today's systems - larger, more complex, and heavily virtualized - and includes information on chaos engineering, the discipline of applying randomness and deliberate stress to reveal systematic problems. Build systems that survive the real world, avoid downtime, implement zero-downtime upgrades and continuous delivery, and make cloud-native applications resilient. Examine ways to architect, design, and build software - particularly distributed systems - that stands up to the typhoon winds of a flash mob, a Slashdotting, or a link on Reddit. Take a hard look at software that failed the test and find ways to make sure your software survives. To skip the pain and get the experience...get this book.