Design And Analysis Of Wdm Network Architectures

Lo, soul! seest thou not God's purpose from the first? The earth to be spann'd, connected by net-work From Passage to India! Walt Whitman, "Leaves of Grass", 1900. The Internet is growing at a tremendous rate today. New services, such as telephony and multimedia, are being added to the pure data-delivery framework of yesterday. Such high demands on capacity could lead to a "bandwidth-crunch" at the core wide-area network resulting in degra dation of service quality. Fortunately, technological innovations have emerged which can provide relief to the end-user to overcome the In ternet's well-known delay and bandwidth limitations. At the physical layer, a major overhaul of existing networks has been envisaged from electronic media (such as twisted-pair and cable) to optical fibers - in the wide area, in the metropolitan area, and even in the local area set tings. In order to exploit the immense bandwidth potential of the optical fiber, interesting multiplexing techniques have been developed over the years. Wavelength division multiplexing (WDM) is such a promising tech nique in which multiple channels are operated along a single fiber si multaneously, each on a different wavelength. These channels can be independently modulated to accommodate dissimilar bit rates and data formats, if so desired. Thus, WDM carves up the huge bandwidth of an optical fiber into channels whose bandwidths (1-10 Gbps) are compati ble with peak electronic processing speed.

Provides a comprehensive and updated account of WDM optical network systems Optical networking has advanced considerably since 2010. A host of new technologies and applications has brought a significant change in optical networks, migrating it towards an all-optical network. This book places great emphasis on the network concepts, technology, and methodologies that will stand the test of time and also help in understanding and developing advanced optical network systems. The first part of Optical WDM Networks: From Static to Elastic Networks provides a qualitative foundation for what follows—presenting an overview of optical networking, the different network architectures, basic concepts, and a high-level view of the different network structures considered in subsequent chapters. It offers a survey of enabling technologies and the hardware devices in the physical layer, followed by a more detailed picture of the network in the remaining chapters. The next sections give an in-depth study of the three basic network structures: the static broadcast networks, wavelength routed networks, and the electronic/optical logically routed networks, covering the characteristics of the optical networks in the access, metropolitan area, and long-haul reach. It discusses the networking picture; network control and management, impairment management and survivability. The last section of the book covers the upcoming technologies of flex-grid and software defined optical networking. Provides concise, updated, and comprehensive coverage of WDM optical networks Features numerous examples and exercise problems for the student to practice Covers, in detail, important topics, such as, access, local area, metropolitan, wide area all-optical and elastic networks Includes protocols, design, and analysis along with the control and management of the networks Offers exclusive chapters on advance topics to cover the present and future technological trends, such as, software defined optical networking and the flexible grid optical networks Optical WDM Networks: From Static to Elastic Networks is an excellent book for under and post graduate students in electrical/communication engineering. It will also be very useful to practicing professionals in communications, networking, and optical systems.

In general, this dissertation proposes several architectures and algorithms for fixed and flexible grid WDM networks that address near and far term network challenges.

A comprehensive book on DWDM network design and implementation solutions Design Software Included Study various optical communication principles as well as communication methodologies in an optical fiber Design and evaluate optical components in a DWDM network Learn about the effects of noise in signal propagation, especially from OSNR and BER perspectives Design optical amplifier-based links Learn how to design optical links based on power budget Design optical links based on OSNR Design a real DWDM network with impairment due to OSNR, dispersion, and gain tilt Classify and design DWDM networks based on size and performance Understand and design nodal architectures for different classification of DWDM networks Comprehend different protocols for transport of data over the DWDM layer Learn how to test and measure different parameters in DWDM networks and optical systems The demand for Internet bandwidth grows as new applications, new technologies, and increased reliance on the Internet continue to rise. Dense wavelength division multiplexing (DWDM) is one technology that allows networks to gain significant amounts of bandwidth to handle this growing need. DWDM Network Designs and Engineering Solutions shows you how to take advantage of the new technology to satisfy your network's bandwidth needs. It begins by providing an understanding of DWDM technology and then goes on to teach the design, implementation, and maintenance of DWDM in a network. You will gain an understanding of how to analyze designs prior to installation to measure the impact that the technology will have on your bandwidth and network efficiency. This book bridges the gap between physical layer and network layer technologies and helps create solutions that build higher capacity and more resilient networks. Companion CD-ROM The companion CD-ROM contains a complimentary 30-day demo from VPIphotonicstrade; for VPItransmissionMakertrade;, the leading design and simulation tool for photonic components, subsystems, and DWDM transmission systems. VPItransmissionMaker contains 200 standard demos, including demos from Chapter 10, that show how to simulate and characterize devices, amplifiers, and systems.

Abstract: Wavelength Division Multiplexing (WDM) is now being widely used in optical networks. WDM significantly increases the capacity of a single fiber by allowing it to simultaneously transmit multiple wavelengths. While such enormous capacity is very exciting, it has also led to the advent of drastically more complex WDM networks. In this work, we consider two architecture design problems for optical networks: (1) the optimal amplifier placement problem, and (2) the traffic grooming, routing, and protection problem for optical networks. In an optical network, optical signals from transmitters attenuate gradually as they propagate through optical fibers, therefore their strength needs to be restored by optical amplifiers before they become too weak to be detected by receivers. Optical amplifiers, however, also introduce the spontaneous emission noise, which is a major problem associated with them. In general, a long optical channel needs enough amplifiers in order to limit the cumulative spontaneous emission noise and attain adequate amplification gain. In our amplifier placement problem, the goal is to minimize the cost associated with optical amplifiers in an optical network subject to constraints on the cumulative spontaneous emission noise. The optical network can be a linear or a mesh network, and the locations of amplifiers can be arbitrary or pre-specified, which are referred as continuous and discrete case, respectively. We propose several different methods based on various optimization techniques and heuristics to solve the problem. In the second part of this work, we consider the traffic grooming, routing, and protection problem in optical networks. There are two basic architectures used in optical networks: ring and mesh. The ring architecture is relatively simple and easy to implement, and it also provides a straightforward way for traffic protection. On the other hand, the mesh architecture is more resilient to various network failures, but is much more complex. Recently, a hybrid architecture that is based on and takes advantage of both ring and mesh architectures has been proposed. We study the traffic grooming, routing, and protection problem for ring, mesh, and hybrid architectures, and use a two-step approach in conjunction with the linear programming technique to solve the problem. Numerical results are provided for a comprehensive comparison between these different architectures.

With the advent of wavelength routing and dynamic, reconfigurable optical networks, new demands are being made in the design and operation of optical amplifiers. This book provides, for the first time, a comprehensive review of optical amplifier technology in the context of these recent advances in the field. It demonstrates how to manage the trade-offs between amplifier design, network architecture and system management and operation. The book provides an overview of optical amplifiers and reconfigurable networks before examining in greater detail the issues of importance to network operators and equipment manufacturers, including 40G and 100G transmission. Optical amplifier design is fully considered, focusing on fundamentals, design solutions and amplifier performance limitations. Finally, the book discusses other emerging applications for optical amplifiers such as optical networks for high data rate systems, free space systems, long single span links and optical digital networks. This book will be of great value to R&D engineers, network and systems engineers, telecommunications service providers, component suppliers, industry analysts, network operators, postgraduate students, academics and anyone seeking to understand emerging trends in optical networks and the consequent changes in optical amplifier design, features and applications. Provides an in depth and focused review of the new reconfigurable network architecture and its impact on optical amplifiers Addresses 40G and 100G transmission and networking Written by experts in the field with deep technical knowledge and practical experience of commercial practice and concerns

Optical networks based on wavelength-division multiplexing (WDM) tech nology offer the promise to satisfy the bandwidth requirements of the Inter net infrastructure, and provide a scalable solution to support the bandwidth needs of future applications in the local and wide areas. In a waveleng- routed network, an optical channel, referred to as a lightpath, is set up between two network nodes for communication. Using WDM technology, an optical fiber link can support multiple non-overlapping wavelength channels, each of which can be operated at the data rate of 10 Gbps or 40 Gbps today. On the other hand, only a fraction of customers are expected to have a need for such a high bandwidth. Due to the large cost of the optical backbone infrastruc ture and enormous WDM channel capacity, connection requests with diverse low-speed bandwidth requirements need to be efficiently groomed onto hi- capacity wavelength channels. This book investigates the optimized design, provisioning, and performance analysis of traffic-groomable WDM networks, and proposes and evaluates new WDM network architectures. Organization of the Book Significant amount of research effort has been devoted to traffic grooming in SONET/WDM ring networks since the current telecom networks are mainly deployed in the form of ring topologies or interconnected rings. As the long-haul backbone networks are evolving to irregular mesh topologies, traffic grooming in optical WDM mesh networks becomes an extremely important and practical research topic for both industry and academia.

The essential guide to the state of the art in WDM and its vast networking potential As a result of its huge transmission capacity and countless other advantages, fiber optics has fostered a bandwidth revolution, addressing the constantly growing demand for increased bandwidth. Within this burgeoning area, Wavelength Division Multiplexing (WDM) has emerged as a breakthrough technology for exploiting the capacity of optical fibers. Today, WDM is deployed by many network providers for point-to-point transmission-but there is strong momentum to develop it as a full-fledged networking technology in its own right. The telecommunications industry, network service providers, and research communities worldwide are paying close attention. Optical WDM Networks presents an easy-to-follow introduction to basic concepts, key issues, effective solutions, and state-of-the-art technologies for wavelength-routed WDM networks. Responding to the need for resources focused on the networking potential of WDM, the book is organized in terms of the most important networking aspects, such as: * Network control architecture * Routing and wavelength assignment * Virtual topology design and reconfiguration * Distributed lightpath control and management * Optical-layer protection and restoration * IP over WDM * Trends for the future in optical networks Each chapter includes examples and problems that illustrate and offer practical application of concepts, as well as extensive references for further reading. This is an essential resource for professionals and students in electrical engineering, computer engineering, and computer science as well as network engineers, designers, planners, operators, and managers who seek a backbone of knowledge in optical networks.