Design And Analysis Of Arduino Raspberry Pi And Xbee Based Wireless Sensor Networks

The Coordinator node consists of an Xbee Series 2 with Coordinator firmware communicating via the Raspberry Pi GPIO serial input ports. The Raspberry Pi uses specialized Python libraries to parse incoming API statements from active end devices.

Build sensor networks with Python and MicroPython using XBee radio modules, Raspberry Pi, and Arduino boards. This revised and updated edition will put all of these together to form a sensor network, and show you how to turn your Raspberry Pi into a MySQL database server to store your sensor data! You'll review the different types of sensors and sensor networks, along with new technology, including how to build a simple XBee network. You'll then walk through building an sensor nodes on the XBee, Raspberry Pi, and Arduino, and also learn how to collect data from multiple sensor nodes. The book also explores different ways to store sensor data, including writing to an SD card, sending data to the cloud, and setting up a Raspberry Pi MySQL server to host your data. You'll even learn how to connect to and interact with a MySQL database server directly from an Arduino! Finally you'll see how to put it all together by connecting your sensor nodes to your new Raspberry Pi database server. If you want to see how well XBee, Raspberry Pi, and Arduino can get along, especially to create a sensor network, then Beginning Sensor Networks with XBee, Raspberry Pi, and Arduino is just the book you need. What You'll LearnCode your sensor nodes with Python and MicroPython Work with new XBee 3 modulesHost your data on Raspberry PiGet started with MySQLCreate sophisticated sensor networks Who This Book Is For Those interested in building or experimenting with sensor networks and IoT solutions, including those with little or no programming experience. A secondary target includes readers interested in using XBee modules with Raspberry Pi and Arduino, those interested in controlling XBee modules with MicroPython.

Beginning Sensor Networks with Arduino and Raspberry Pi teaches you how to build sensor networks with Arduino, Raspberry Pi, and XBee radio modules, and even shows you how to turn your Raspberry Pi into a MySQL database server to store your sensor data! First you'll learn about the different types of sensors and sensor networks, including how to build a simple XBee network. Then you'll walk through building an Arduino-based temperature sensor and data collector, followed by building a Raspberry Pi-based sensor node. Next you'll learn different ways to store sensor data, including writing to an SD card, sending data to the cloud, and setting up a Raspberry Pi MySQL server to host your data. You even learn how to connect to and interact with a MySQL database server directly from an Arduino! Finally you'll learn how to put it all together by connecting your Arduino sensor node to your new Raspberry Pi database server. If you want to see how well Arduino and Raspberry Pi can get along, especially to create a sensor network, then Beginning Sensor Networks with Arduino and Raspberry Pi is just the book you need.

Get ready to create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and Series 2 XBee radios. By the time you're halfway through this fast-paced, hands-on guide, you'll have built a series of useful projects, including a complete ZigBee wireless network that delivers remotely sensed data. Radio networking is creating revolutions in volcano monitoring, performance art, clean energy, and consumer electronics. As you follow the examples in each chapter, you'll learn how to tackle inspiring projects of your own. This practical guide is ideal for inventors, hackers, crafters, students, hobbyists, and scientists. Investigate an assortment of practical and intriguing project ideas Prep your ZigBee toolbox with an extensive shopping list of parts and programs Create a simple, working ZigBee network with XBee radios in less than two hours -- for under $100 Use the Arduino open source electronics prototyping platform to build a series of increasingly complex projects Get familiar with XBee's API mode for creating sensor networks Build fully scalable sensing and actuation systems with inexpensive components Learn about power management, source routing, and other XBee technical nuances Make gateways that connect with neighboring networks, including the Internet

Sensor network technology is considered as one of the key technologies for the 21st century. Wireless sensor networks have emerged as an important area for research and development. Their impact is predicted to be far-reaching, and they are attracting a great interest in many applications from remote monitoring of environment, habitat, agriculture, military applications, health care, automation, dangerous areas, and disaster prone zones, among many others. Through advances in sensor, networking, semiconductor and energy storage technologies, future Wireless Sensor Networks will combine to form the nervous system of the Internet of Things. In these networks, the nodes are typically operated by battery power, making energy consumption a very important fact to increase the network lifetime. The large number of sensor nodes involved in such networks and the need to operate over a long period of time require careful management of the energy resources. The goal of this project is to design and implement a wireless sensor network, using an Arduino board and a Xbee module, to measure a single (or multiple) variable such as temperature, ensuring communication between nodes, as well as designing a power stage for the nodes. The document will first make a review of current wireless technologies, then it will study the available hardware and software to implement and finally it will propose and develop a solution to achieve the mentioned objective.

Leverage the powerful Arduino and XBee platforms to monitor and control your surroundings About This Book Build your own low-power, wireless network using ready-made Arduino and XBee hardware Create a complex project using the Arduino prototyping platform A guide that explains the concepts and builds upon them with the help of examples to form projects Who This Book Is For This book is targeted at embedded system developers and hobbyists who have some working knowledge of Arduino and who wish to extend their projects using wireless connectivity. What You Will Learn Interact with XBee boards using the XCTU program on Windows, OS X, or Linux Make your Arduino boards communicate wirelessly, using XBee modules in the advanced API mode Centrally collect and store measured sensor data, in the cloud or your own database Connect the coordinator Arduino to the Internet and send data to web services Control your environment automatically, based on sensor input from your network Interact with off-the-shelf ZigBee Home Automation devices Make your devices battery-powered and let them sleep to get months or even years of battery life In Detail Arduino has been established as the de facto standard microcontroller programming platform, being used for one-off do-it-yourself projects as well as prototypes for actual products. By providing a myriad of libraries, the Arduino community has made it very easy to interact with pretty much any piece of hardware out there. XBee offers a great range of low-power wireless solutions that are easy to work with, by taking all of the complexity of wireless (mesh) networking out of your hands and letting you focus on what to send without worrying about the how. Building wireless sensor networks is cost-effective as well as efficient as it will be done with Arduino support. The book starts with a brief introduction to various wireless protocols, concepts, and the XBee hardware that enables their use. Then the book expands to explain the Arduino boards to you, letting them read and send sensor data, collect that data centrally, and then even control your home from the Internet. Moving further more advanced topics such as interacting through the standard Zigbee Home Automation protocol, or making your application power-efficient are covered. By the end of the book, you will have all the tools needed to build complete, real-world solutions. Style and approach A hands-on guide, featuring a single home automation project that can be built as described or with endless variations. Every step is illustrated with complete examples and screenshots, allowing you to build the examples swiftly.

A Hands-On Course in Sensors using the Arduino and Raspberry Pi is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers, Raspberry Pi and other control systems. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. The collection, processing, and understanding of sensor data plays a central role in industrial and scientific activities. This book builds simplified models of large industrial or scientific installations that contain hardware and other building blocks, including services for databases, web servers, control systems, and messaging brokers. A range of case studies are included within the book, including a weather station, geophones, a water-colour monitor, capacitance measurement, the profile of laser beam, and a remote-controlled and fire-seeking robot This book is suitable for advanced undergraduate and graduate students taking hands-on laboratory courses in physics and engineering. Hobbyists in robotics clubs and other enthusiasts will also find this book of interest. Features: Includes practical, hands-on exercises that can be conducted in student labs, or even at home Covers the latest software and hardware, and all code featured in examples is discussed in detail All steps are illustrated with practical examples and case studies to enhance learning

Build your own distributed sensor network to collect, analyze, and visualize real-time data about our human environment—including noise level, temperature, and people flow. With this hands-on book, you’ll learn how to turn your project idea into working hardware, using the easy-to-learn Arduino microcontroller and off-the-shelf sensors. Authors Alasdair Allan and Kipp Bradford walk you through the entire process, from prototyping a simple sensor node to performing real-time analysis on data captured by a deployed multi-sensor network. Demonstrated at recent O’Reilly Strata Conferences, the future of distributed data is already here. If you have programming experience, you can get started immediately. Wire up a circuit on a breadboard, and use the Arduino to read values from a sensor Add a microphone and infrared motion detector to your circuit Move from breadboard to prototype with Fritzing, a program that converts your circuit design into a graphical representation Simplify your design: learn use cases and limitations for using Arduino pins for power and grounding Build wireless networks with XBee radios and request data from multiple sensor platforms Visualize data from your sensor network with Processing or LabVIEW

Create your own IoT projects DESCRIPTIONÊÊ The book has been written in such a way that the concepts are explained in detail. It is entirely based on the practical experience of the authors while undergoing projects with students and industries, giving adequate emphasis on circuits and code examples. To make the topics more comprehensive, circuit diagrams, photographs and code samples are furnished extensively throughout the book. The book is conceptualized and written in such a way that the beginner readers will find it very easy to understand and implement the circuits and programs. The objective of this book is to discuss the various projects based on the Internet of Things (IoT). KEY FEATURESÊÊ Comprehensive coverage of various aspects of IoT concepts Covers various Arduino boards and shields Simple language, crystal clear approach and straight forward comprehensible presentation Adopting user-friendly style for the explanation of circuits and examplesÊ Includes basics of Raspberry Pi and related projects WHAT WILL YOU LEARNÊÊ Internet of Things, IoT-Based Smart Camera, IoT-Based Dust SamplerÊ Learn to create ESP8266-Based Wireless Web Server and Air Pollution Meter Using Raspberry Pi, Smart Garage Door, Baggage Tracker, Smart Trash Collector, Car parking system, Home Automation Windows 10 on Raspberry and know to create Wireless Video Surveillance Robot Using Raspberry PiÊ WHO THIS BOOK IS FORÊÊ Students pursuing BE/BSc/ME/MSc/BTech/MTech in Computer Science, Electronics, Electrical. TABLE OF CONTENTS 1. ESP8266-Based Wireless Web Server 2. Air Pollution Meter Using Raspberry Pi 3. Smart Garage Door 4. Baggage Tracker 5. Smart Trash Collector 6. Car parking system 7. Home Automation 8. Environmental Parameter Monitoring 9. Intelligent System for the Blind 10. Sign to Speech Using the IoTs 11. Windows 10 on Raspberry 12. Wireless Video Surveillance Robot Using Raspberry PiÊ 13. IoT-Based Smart Camera 14. IoT-Based Dust Sampler and Air Quality Monitoring System

Learn the Raspberry Pi 3 from the experts! Raspberry Pi User Guide, 4th Edition is the "unofficial official" guide to everything Raspberry Pi 3. Written by the Pi's creator and a leading Pi guru, this book goes straight to the source to bring you the ultimate Raspberry Pi 3 manual. This new fourth edition has been updated to cover the Raspberry Pi 3 board and software, with detailed discussion on its wide array of configurations, languages, and applications. You'll learn how to take full advantage of the mighty Pi's full capabilities, and then expand those capabilities even more with add-on technologies. You'll write productivity and multimedia programs, and learn flexible programming languages that allow you to shape your Raspberry Pi into whatever you want it to be. If you're ready to jump right in, this book gets you started with clear, step-by-step instruction from software installation to system customization. The Raspberry Pi's tremendous popularity has spawned an entire industry of add-ons, parts, hacks, ideas, and inventions. The movement is growing, and pushing the boundaries of possibility along with it—are you ready to be a part of it? This book is your ideal companion for claiming your piece of the Pi. Get all set up with software, and connect to other devices Understand Linux System Admin nomenclature and conventions Write your own programs using Python and Scratch Extend the Pi's capabilities with add-ons like Wi-Fi dongles, a touch screen, and more The credit-card sized Raspberry Pi has become a global phenomenon. Created by the Raspberry Pi Foundation to get kids interested in programming, this tiny computer kick-started a movement of tinkerers, thinkers, experimenters, and inventors. Where will your Raspberry Pi 3 take you? The Raspberry Pi User Guide, 3rd Edition is your ultimate roadmap to discovery.