Cross Layer Design In Adhoc Networks

This book explores the optimization potential of cross-layer design approaches for wireless ad hoc and sensor network performance, covering both theory and practice. A theoretical section provides an overview of design issues in both strictly layered and cross-layer approaches. A practical section builds on these issues to explore three case studies of diverse ad hoc and sensor network applications and communication technologies.

Information flow in a telecommunication network is accomplished through the interaction of mechanisms at various design layers with the end goal of supporting the information exchange needs of the applications. In wireless networks in particular, the different layers interact in a nontrivial manner in order to support information transfer. In this text we will present abstract models that capture the cross-layer interaction from the physical to transport layer in wireless network architectures including cellular, ad-hoc and sensor networks as well as hybrid wireless-wireline. The model allows for arbitrary network topologies as well as traffic forwarding modes, including datagrams and virtual circuits. Furthermore the time varying nature of a wireless network, due either to fading channels or to changing connectivity due to mobility, is adequately captured in our model to allow for state dependent network control policies. Quantitative performance measures that capture the quality of service requirements in these systems depending on the supported applications are discussed, including throughput maximization, energy consumption minimization, rate utility function maximization as well as general performance functionals. Cross-layer control algorithms with optimal or suboptimal performance with respect to the above measures are presented and analyzed. A detailed exposition of the related analysis and design techniques is provided.

Adaptive techniques play a key role in modern wireless communication systems. The concept of adaptation is emphasized in the Adaptation in Wireless Communications Series through a unified framework across all layers of the wireless protocol stack ranging from the physical layer to the application layer, and from cellular systems to next-generation wireless networks. Adaptation and Cross Layer Design in Wireless Networks is devoted to adaptation in the data link layer, network layer, and application layer. The book presents state-of-the-art adaptation techniques and methodologies, including cross-layer adaptation, joint signal processing, coding and networking, selfishness in mobile ad hoc networks, cooperative and opportunistic protocols, adaptation techniques for multimedia support, self –organizing routing, and tunable security services. It presents several new theoretical paradigms and analytical findings which are supported with various simulation and experimental results. Adaptation in wireless communications is needed in order to achieve high capacity and ubiquitous communications. The current trend in wireless communication systems is to make adaptation dependent upon the state of the relevant parameters in all layers of the system. Focusing on simplified cross layer design approaches, this volume describes advanced techniques such as adaptive resource management, adaptive modulation and coding, 4G communications, QoS, diversity combining, and energy and mobility aware MAC protocols. The first volume in the series, Adaptive Signal Processing in Wireless Communications (cat no.46012) covers adaptive signal processing at the physical layer.

Adhoc wireless network encompass mobile devices that uses wireless transmission for communication. They can be setup anywhere and anytime as and when required. They do not have infrastructural setup and central administrative support. Cross Layer Design In Adhoc Networks: A Security Aspect is meant for the students pursuing research in Adhoc network. It deals with the intricacies of cross layer designs and provides a glimpse of security aspects. It is a simple book that can be utilized by even the students of engineering having Adhoc network as a subject.

Doctoral Thesis / Dissertation from the year 2016 in the subject Computer Science - Miscellaneous, grade: 16, , language: English, abstract: In this thesis, we have modified AODV routing protocol by incorporating link prediction algorithm using a proposed link prediction model. This algorithm predicts the link availability time and even before the link breaks; either it repairs the route locally or sends information to the source nodes to enable them to initiate a new route search well in time. This algorithm improves the quality of service of the network. Simulation results show that AODV routing algorithm with link availability model performs better than the existing AODV. Advances in wireless technology and hand-held computing devices have brought revolution in the area of mobile communication. The increasing mobility of humans across the globe generated demand for infrastructure-less and quickly deployable mobile networks. Such networks are referred to as Mobile Adhoc Networks (MANET). Usually, nodes in a MANET also act as a router while being is free to roam while communicating each others. Adhoc networks are suited for use in situations where infrastructure is unavailable or to deploy one is not cost-effective. Frequent changes in network topology due to mobility and limited battery power of the mobile devices are the key challenges in the adhoc networks. The depletion of power source may cause early unavailability of nodes and thus links in the network. The mobility of nodes will also causes frequent routes breaks and adversely affects the required performance for the applications. Availability of a route in future mainly depends on the availability of links between the nodes forming the route. Therefore, it is important to predict the future availability of a link that is currently available. We have proposed an analytical model for link prediction using Newton divided difference method. This link availability algorithm is incorporated in AODV routing algorithm (AODVLP) to evaluate the performance of AODV routing protocol using the metrics viz. delivery rate, average end-to-end delay, average RTS collisions per node and route failure. In the existing AODV protocol, packets are routed until a link in the existing path fails. This results in degradation of quality of service of network in terms of end-to-end delay and delivery ratio.

Adaptive techniques play a key role in modern wireless communication systems. The concept of adaptation is emphasized in the Adaptation in Wireless Communications Series through a unified framework across all layers of the wireless protocol stack ranging from the physical layer to the application layer, and from cellular systems to next-generation wireless networks. Adaptation and Cross Layer Design in Wireless Networks is devoted to adaptation in the data link layer, network layer, and application layer. The book presents state-of-the-art adaptation techniques and methodologies, including cross-layer adaptation, joint signal processing, coding and networking, selfishness in mobile ad hoc networks, cooperative and opportunistic protocols, adaptation techniques for multimedia support, self –organizing routing, and tunable security services. It presents several new theoretical paradigms and analytical findings which are supported with various simulation and experimental results. Adaptation in wireless communications is needed in order to achieve high capacity and ubiquitous communications. The current trend in wireless communication systems is to make adaptation dependent upon the state of the relevant parameters in all layers of the system. Focusing on simplified cross layer design approaches, this volume describes advanced techniques such as adaptive resource management, adaptive modulation and coding, 4G communications, QoS, diversity combining, and energy and mobility aware MAC protocols. The first volume in the series, Adaptive Signal Processing in Wireless Communications (cat no.46012) covers adaptive signal processing at the physical layer.

Although the existing layering infrastructure--used globally for designing computers, data networks, and intelligent distributed systems and which connects various local and global communication services--is conceptually correct and pedagogically elegant, it is now well over 30 years old has started create a serious bottleneck. Using Cross-Layer Techniques for Communication Systems: Techniques and Applications explores how cross-layer methods provide ways to escape from the current communications model and overcome the challenges imposed by restrictive boundaries between layers. Written exclusively by well-established researchers, experts, and professional engineers, the book will present basic concepts, address different approaches for solving the cross-layer problem, investigate recent developments in cross-layer problems and solutions, and present the latest applications of the cross-layer in a variety of systems and networks.