Cracks Movements And Joints In Buildings

First published in 1996. Routledge is an imprint of Taylor & Francis, an informa company.

"What's the Crack?" When cracking is observed in a building the most common reaction is that it must be the foundations and that it must be serious. Many surveyors are nervous about diagnosing cracks. This is understandable, as the interpretation of cracks can be difficult to teach, with university courses providing little or no time for field experience. Yet by understanding one straightforward principle the majority of cracks can be diagnosed in just a few minutes. Linking this with a good knowledge of construction techniques, the factors that distort cracking patterns and the key features of common causes of cracking, almost all cracks can be diagnosed quickly and with confidence. Practical Guide to Diagnosing Structural Movement in Buildings provides a methodology by which cracks and movement in buildings can be diagnosed. Written in four parts, part one describes the key principles of movement and cracking. Parts two and three describe the main features of common forms of movement and the associated crack patterns. Part two covers causes other than ground or foundation movement and part three covers movement caused by ground or foundation problems. Part four briefly describes the techniques used to arrest further movement or repair damage cause by movement. Primarily intended for the relatively inexperienced surveyor or engineer and undergraduate students of surveying as a practical guide for use on site, it focuses on identification and diagnosis. It will not only help in correctly diagnosing the problem but it will also demonstrate a methodical approach to show and record how the diagnosis was reached – critical when giving advice to third parties. "What's the crack?" - In the vast majority of cases it's not foundation related and in most cases it's not indicating a serious defect.

This title provides advice on provision, specification and construction of joints in in-situ concrete construction. It aims to help structural designers make informed decisions about the provision of joints in concrete structures.

This new edition has been extensively revised and expanded to include an additional chapter on dynamic movements in buildings, and new material concerning movements in buildings caused by shrinkage and swelling due to seasonal changes in the soil moisture content. The chief causes for movements in buildings: elastic deformations, creep, temperature changes, moisture movements, dynamic loads, consolidation and mining subsidence are examined in detail and useful examples with solutions are included. Whilst essentially a text for undergraduate students of civil and structural engineering building technology and architecture, this clear and concise introduction will also be of interest to the practising engineer. In SI units