Cisco Router Handbook

Fast answers and reliable solutions for all widely-used Cisco router features - all in one time-saving guide Organized for maximum efficiency: describes actual commands and options in the sequence they should be used Helps network pros eliminate time-consuming documentation searches Extensive updates: IPv6, MPLS, AutoQoS, SIP, MGCP, voice troubleshooting, VPNs, security, and more "At-a-glance" illustrations offer fast answers and easy double-checking Locating reliable Cisco router configuration command information can require extensive, time-consuming research. Cisco Router Configuration Handbook, 2/e, is the solution: a day-to-day reference to the most widely used Cisco router features and configurations. Straight from Cisco experts, it covers every facet of router configuration, including fundamentals, network protocols, packet processing, voice/telephony, security, and more. This book is organized for maximum efficiency. Related features are covered together, and features and options are covered in the sequence in which they are typically used. Shaded tabs mark each section for quick reference. Information on each feature, technology, or protocol is presented in a concise one- or two-page format, with sections presenting quick facts, configuration information, and step-by-step examples, including both required and optional commands. Simply put, this book brings together all the Cisco routing configuration information most network professionals will ever need - and organizes it more efficiently than any other resource.

Cisco owns the largest share of the router market. This reference guide gives network adminstrators and engineers over 200 troubleshooting tips and defines, analyzes and describes more than 500 possible configurations. This edition has been updated to include: new routers and their capabilities; coverage of voice technologies, VPNs and QoS with ATM; enhanced coverage of security features within Cisco routers, including intrusion and detection; and coverage of broadband technologies such as DSL.

This reference guide to the commands contained with BGP-4 explains the intended use and function and how to properly configure each command. Scenarios are presented to demonstrate every facet of the command and its use.

On-the-Job Cisco IP Routing Solutions! Packed with network-tested troubleshooting techniques, advanced configuration solutions, and inside tips on how to avoid common pitfalls, this all-fact, no-fluff reference shows you step-by-step how to tackle real-world IP routing challenges. There's no theory, no tutorials -- just the nuts-and-bolts information you need to solve the problem at hand, compiled by three Cisco-certified professionals who've seen it all.

"Cisco OSPF Command and Configuration Handbook is a clear, concise, and complete source of documentation for all Cisco IOS Software OSPF commands. The way you use this book will depend on your objectives. If you are preparing for the CCIE written and lab exams, then this book can be used as a laboratory guide to learn the purpose and proper use of every OSPF command. If you are a network designer, then this book can be used as a ready reference for any OSPF command. Author Bill Parkhurst provides concise snapshots of every command with regard to command purpose, usage, syntax explanation, initial introduction in Cisco IOS Software, and cross references to related commands also covered in the book. This book covers many OSPF topic areas, including interface configuration, OSPF area configuration, route filtering, OSPF process configuration, route cost, default route generation, redistribution, administrative distance, OSPF neighbor relationships, route summarization, and show, debug, and clear commands"--Resource description page.

The ultimate command reference for configuring Cisco "RM" routers and switches. This guide presents the common elements of complex configurations for Cisco "RM" routers, switches, and firewalls in an intuitive, easy-to-reference format.

This work provides a guide to the configuration of Cisco routers, from tasks for beginners to advanced operations. A collection of detailed "how-to" instructions are presented, which will be of use to all professionals and students who engage with Cisco routers in the field or in the lab. The guide starts with the simple step-by-step task of connecting the router and performing basic configuration, before building up to complex and sensitive operations such as router IOS upgrade and Site-to-Site VPNs.

Harden perimeter routers with Cisco firewall functionality and features to ensure network security Detect and prevent denial of service (DoS) attacks with TCP Intercept, Context-Based Access Control (CBAC), and rate-limiting techniques Use Network-Based Application Recognition (NBAR) to detect and filter unwanted and malicious traffic Use router authentication to prevent spoofing and routing attacks Activate basic Cisco IOS filtering features like standard, extended, timed, lock-and-key, and reflexive ACLs to block various types of security threats and attacks, such as spoofing, DoS, Trojan horses, and worms Use black hole routing, policy routing, and Reverse Path Forwarding (RPF) to protect against spoofing attacks Apply stateful filtering of traffic with CBAC, including dynamic port mapping Use Authentication Proxy (AP) for user authentication Perform address translation with NAT, PAT, load distribution, and other methods Implement stateful NAT (SNAT) for redundancy Use Intrusion Detection System (IDS) to protect against basic types of attacks Obtain how-to instructions on basic logging and learn to easily interpret results Apply IPSec to provide secure connectivity for site-to-site and remote access connections Read about many, many more features of the IOS firewall for mastery of router security The Cisco IOS firewall offers you the feature-rich functionality that you've come to expect from best-of-breed firewalls: address translation, authentication, encryption, stateful filtering, failover, URL content filtering, ACLs, NBAR, and many others. Cisco Router Firewall Security teaches you how to use the Cisco IOS firewall to enhance the security of your perimeter routers and, along the way, take advantage of the flexibility and scalability that is part of the Cisco IOS Software package. Each chapter in Cisco Router Firewall Security addresses an important component of perimeter router security. Author Richard Deal explains the advantages and disadvantages of all key security features to help you understand when they should be used and includes examples from his personal consulting experience to illustrate critical issues and security pitfalls. A detailed case study is included at the end of the book, which illustrates best practices and specific information on how to implement Cisco router security features. Whether you are looking to learn about firewall security or seeking how-to techniques to enhance security in your Cisco routers, Cisco Router Firewall Security is your complete reference for securing the perimeter of your network. This book is part of the Networking Technology Series from Cisco Press, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.

This book is a concise one-stop desk reference and synopsis of basic knowledge and skills for Cisco certification prep. For beginning and experienced network engineers tasked with building LAN, WAN, and data center connections, this book lays out clear directions for installing, configuring, and troubleshooting networks with Cisco devices. The full range of certification topics is covered, including all aspects of IOS, NX-OS, and ASA software. The emphasis throughout is on solving the real-world challenges engineers face in configuring network devices, rather than on exhaustive descriptions of hardware features. This practical desk companion doubles as a comprehensive overview of the basic knowledge and skills needed by CCENT, CCNA, and CCNP exam takers. It distills a comprehensive library of cheat sheets, lab configurations, and advanced commands that the authors assembled as senior network engineers for the benefit of junior engineers they train, mentor on the job, and prepare for Cisco certification exams. Prior familiarity with Cisco routing and switching is desirable but not necessary, as Chris Carthern, Dr. Will Wilson, Noel Rivera, and Richard Bedwell start their book with a review of the basics of configuring routers and switches. All the more advanced chapters have labs and exercises to reinforce the concepts learned. This book differentiates itself from other Cisco books on the market by approaching network security from a hacker’s perspective. Not only does it provide network security recommendations but it teaches you how to use black-hat tools such as oclHashcat, Loki, Burp Suite, Scapy, Metasploit, and Kali to actually test the security concepts learned. Readers of Cisco Networks will learn How to configure Cisco switches, routers, and data center devices in typical corporate network architectures The skills and knowledge needed to pass Cisco CCENT, CCNA, and CCNP certification exams How to set up and configure at-home labs using virtual machines and lab exercises in the book to practice advanced Cisco commands How to implement networks of Cisco devices supporting WAN, LAN, and data center configurations How to implement secure network configurations and configure the Cisco ASA firewall How to use black-hat tools and network penetration techniques to test the security of your network