Characterization Of Nanoporous Materials By Gas Adsorption And Density Functional Theory

This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, and engineering, with length scales ranging from Ångstromsup to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area ofcurrent interest and brings together leading experts to give an up-to-date discussion of their work and the work ofothers. Each article contains enough references that the interested reader can accesstherelevant literature. Thanks aregiven to the Center forFundamental Materials Research atMichigan State University forsupportingthis series. M.F. Thorpe, Series Editor E-mail: [email protected] EastLansing,Michigan, September, 1995 PREFACE This book records selected papers given at an interdisciplinary Symposium on Access in Nanoporous Materials held in Lansing, Michigan, on June 7-9, 1995. Broad interest in the synthesis of ordered materials with pore sizes in the 1.0-10 nm range was clearly manifested in the 64 invited and contributed papers presented by workers in the formal fields of chemistry, physics, and engineering. The intent of the symposium was to bring together a small number ofleading researchers within complementary disciplines to share in the diversity of approaches to nanoporous materials synthesis and characterization.

As nanomaterials get smaller, their properties increasingly diverge from their bulk material counterparts. Written from a materials science perspective, Adsorption and Diffusion in Nanoporous Materials describes the methodology for using single-component gas adsorption and diffusion measurements to characterize nanoporous solids. Concise, yet comprehensive, the book covers both equilibrium adsorption and adsorption kinetics in dynamic systems in a single source. It presents the theoretical and mathematical tools for analyzing microporosity, kinetics, thermodynamics, and transport processes of the adsorbent surface. Then it examines how these measurements elucidate structural and morphological characteristics of the materials. Detailed descriptions of the phenomena include diagrams, essential equations, and fully derived, concrete examples based on the author's own research experiences and insight. The book contains chapters on statistical physics, dynamic adsorption in plug flow bed reactors, and the synthesis and modification of important nanoporous materials. The final chapter covers the principles and applications of adsorption for multicomponent systems in the liquid phase. Connecting recent advances in adsorption characterization with developments in the transport and diffusion of nanoporous materials, this book is ideal for scientists involved in the research, development, and applications of new nanoporous materials.

Porous materials are of scientific and technological importance because of the presence of voids of controllable dimensions at the atomic, molecular, and nanometer scales, enabling them to discriminate and interact with molecules and clusters. Interestingly the big deal about this class of materials is about the “nothingness” within — the pore space. International Union of Pure and Applied Chemistry (IUPAC) classifies porous materials into three categories — micropores of less than 2 nm in diameter, mesopores between 2 and 50 nm, and macropores of greater than 50 nm. In this book, nanoporous materials are defined as those porous materials with pore diameters less than 100 nm.Over the last decade, there has been an ever increasing interest and research effort in the synthesis, characterization, functionalization, molecular modeling and design of nanoporous materials. The main challenges in research include the fundamental understanding of structure-property relations and tailor-design of nanostructures for specific properties and applications. Research efforts in this field have been driven by the rapid growing emerging applications such as biosensor, drug delivery, gas separation, energy storage and fuel cell technology, nanocatalysis and photonics. These applications offer exciting new opportunities for scientists to develop new strategies and techniques for the synthesis and applications of these materials.This book provides a series of systematic reviews of the recent developments in nanoporous materials. It covers the following topics: (1) synthesis, processing, characterization and property evaluation; (2) functionalization by physical and/or chemical treatments; (3) experimental and computational studies on fundamental properties, such as catalytic effects, transport and adsorption, molecular sieving and biosorption; (4) applications, including photonic devices, catalysis, environmental pollution control, biological molecules separation and isolation, sensors, membranes, hydrogen and energy storage, etc./a

The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.

Nanoporous materials are critical to various fields of research, including ion exchange, separation, catalysis, sensor applications, biological molecular isolation, and purification. In addition, they offer new opportunities in such areas as inclusion chemistry, guest-host synthesis, and molecular manipulations and reactions at the nanoscale. In St

With pore sizes up to 100 nm, the term "nanoporous" covers a wide range of material classes. A broad field of applications has arisen from the diversity of unique structures and properties of nanoporous materials. Recent research spans the range from fundamental studies of the behavior of atoms and molecules in confined space, creative synthetic pathways for novel materials, to applications in high-performance technologies. This Special Issue collects current studies about the progress in the development, characterization, and application of nanoporous materials, including (but not restricted to) mesoporous silica, carbon and metal oxides, porous coordination polymers, metal organic frameworks (MOFs), and covalent organic frameworks (COFs), as well as materials exhibiting hierarchical porosity. Their functionalities show promise for fields such as energy storage/conversion (e.g., photocatalysis and battery electrodes), sensing, catalysis, and their sorption properties for N2, CO2, NOx, or H2O, to name just a few.

This volume covers a wide range of adsorption activities of porous carbon (PC), CNTs, and carbon nano structures that have been employed so far for the removal of various pollutants from water, wastewater, and organic compounds. The low cost, high efficiency, simplicity, and ease in the upscaling of adsorption processes using PC make the adsorption

Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.

In order to find/design porous materials that could be used in practical applications involving adsorption, it is important to investigate the basic properties (i.e. isosteric heat, specific surface area, binding energy, pore size, pore volume, etc.) of each material. With this aim in mind we have looked at three different types of materials: single-walled carbon nanotubes (prepared by the HiPco and laser methods), single-walled nanohorns (dahlia-like and bud-like) and metal-organic frameworks (Cu-BTC and RPM-1). For these substrates we have measured volumetric adsorption isotherms using several gases such as neon, argon, tetrafluoromethane (CF 4 ), xenon, and methane (not all gases for all substrates). Experimental adsorption isotherms were measured using methane, argon, xenon, and neon gases on unpurified single-walled carbon nanotubes prepared by the HiPco method. The main idea behind these experiments was to investigate, using different size gas molecules, the sites available for adsorption on this type of porous material.