Boiler Control Systems

Boiler Control Systems provides definitive information on the design, implementation, maintenance, & operation of large-scale control systems for boilers. It forms a bridge between the disciplines of the electronics engineer & the plant engineer to enable each to understand the issues involved. The book deals first with plant engineering issues, then moves on to consider control systems themselves, & finally a wide range of practical considerations such as commercial aspects, measurements & site considerations. Boiler Control Systems will be of immense use to boiler designers, systems engineers in process control, plant owners, operators, & maintenance staff.

This book is for anyone who works with boilers as a utilities manager, power plant manager, control systems engineer, maintenance technician or operator. The information deals primarily with water tube boilers with Induced Draft (ID) and Forced Draft (FD) fan(s) or boilers with only a FD fan. However, it can apply to any steam generator requiring the firing of fuel. The book addresses issues to be considered when defining measurement transmitters and specification for transmitters. Final control elements are reviewed as to characteristics and sizing. Engineering details on control systems and the setup of the various control functions are covered with specific examples of boiler control including configuration and tuning. The book also contains some of the primary requirements for a Burner Management System.

This book is for anyone who works with boilers: utilities managers, power plant managers, control systems engineers, maintenance technicians or operators. The information deals primarily with water tube boilers with Induced Draft (ID) and Forced Draft (FD) fan(s) or boilers containing only FD fans. It can also apply to any fuel-fired steam generator. Other books on boiler control have been published; however, they do not cover engineering details on control systems and the setup of the various control functions. Boiler Control Systems Engineering provides specific examples of boiler control including configuration and tuning, valve sizing, and transmitter specifications. This expanded and updated second edition includes drum level compensation equations, additional P&ID drawings and examples of permissive startup and tripping logic for gas, oil, and coal fired boilers. It also covers different control schemes for furnace draft control. NFPA 85 Code 2007 control system requirements are included, with illustrated examples of coal fired boilers, as well as information on the latest ISA-77 series of standards.

Control Systems for Heating, Ventilating and Air Conditioning, Sixth Edition is complete and covers both hardware control systems and modern control technology. The material is presented without bias and without prejudice toward particular hardware or software. Readers with an engineering degree will be reminded of the psychrometric processes associated with heating and air conditioning as they learn of the various controls schemes used in the variety of heating and air conditioning system types they will encountered in the field. Maintenance technicians will also find the book useful because it describes various control hardware and control strategies that were used in the past and are prevalent in most existing heating and air conditioning systems. Designers of new systems will find the fundamentals described in this book to be a useful starting point, and they will also benefit from descriptions of new digital technologies and energy management systems. This technology is found in modern building HVAC system designs.

Introductory technical guidance for mechanical and electrical engineers interested in control systems for steam and hot water boilers. Here is what is discussed: 1. TYPES OF CONTROLS 2. GENERAL REQUIREMENTS 3. PANEL INSTRUMENTS 4. LOCAL DEVICES AND INSTRUMENTATION 5. RECOMMENDED BOILER INSTRUMENTATION 6. CONTROL LOOPS.

Control Systems for Heating, Ventilating and Air Conditioning, Sixth Edition is complete and covers both hardware control systems and modern control technology. The material is presented without bias and without prejudice toward particular hardware or software. Readers with an engineering degree will be reminded of the psychrometric processes associated with heating and air conditioning as they learn of the various controls schemes used in the variety of heating and air conditioning system types they will encountered in the field. Maintenance technicians will also find the book useful because it describes various control hardware and control strategies that were used in the past and are prevalent in most existing heating and air conditioning systems. Designers of new systems will find the fundamentals described in this book to be a useful starting point, and they will also benefit from descriptions of new digital technologies and energy management systems. This technology is found in modern building HVAC system designs.

This book is for anyone who works with boilers: utilities managers, power plant managers, control systems engineers, maintenance technicians or operators. The information deals primarily with water tube boilers with Induced Draft (ID) and Forced Draft (FD) fan(s) or boilers containing only FD fans. It can also apply to any fuel-fired steam generator.

Introductory technical guidance for mechanical and electrical engineers interested in control systems for steam and hot water boilers. Here is what is discussed:1. TYPES OF CONTROLS2. GENERAL REQUIREMENTS3. PANEL INSTRUMENTS4. LOCAL DEVICES AND INSTRUMENTATION5. RECOMMENDED BOILER INSTRUMENTATION6. CONTROL LOOPS.

Introductory technical guidance for mechanical and electrical engineers interested in boiler control systems. Here is what is discussed: 1. INTRODUCTION 2. PANEL INSTRUMENTS 3. LOCAL DEVICES AND INSTRUMENTATION 4. RECOMMENDED BOILER INSTRUMENTATION 5. REFERENCES.