Analog Vlsi Design Automation

The explosive growth and development of the integrated circuit market over the last few years have been mostly limited to the digital VLSI domain. The difficulty of automating the design process in the analog domain, the fact that a general analog design methodology remained undefined, and the poor performance of earlier tools have left the analog

Very large scale integration (VLSI) technologies are now maturing with a current emphasis toward submicron structures and sophisticated applications combining digital as well as analog circuits on a single chip. Abundant examples are found on today's advanced systems for telecom munications, robotics, automotive electronics, image processing, intelli gent sensors, etc .. Exciting new applications are being unveiled in the field of neural computing where the massive use of analog/digital VLSI technologies will have a significant impact. To match such a fast technological trend towards single chip ana logi digital VLSI systems, researchers worldwide have long realized the vital need of producing advanced computer aided tools for designing both digital and analog circuits and systems for silicon integration. Ar chitecture and circuit compilation, device sizing and the layout genera tion are but a few familiar tasks on the world of digital integrated circuit design which can be efficiently accomplished by matured computer aided tools. In contrast, the art of tools for designing and producing analog or even analogi digital integrated circuits is quite primitive and still lack ing the industrial penetration and acceptance already achieved by digital counterparts. In fact, analog design is commonly perceived to be one of the most knowledge-intensive design tasks and analog circuits are still designed, largely by hand, by expert intimately familiar with nuances of the target application and integrated circuit fabrication process. The techniques needed to build good analog circuits seem to exist solely as expertise invested in individual designers.

The explosive growth and development of the integrated circuit market over the last few years have been mostly limited to the digital VLSI domain. The difficulty of automating the design process in the analog domain, the fact that a general analog design methodology remained undefined, and the poor performance of earlier tools have left the analog

This book introduces readers to a variety of tools for analog layout design automation. After discussing the placement and routing problem in electronic design automation (EDA), the authors overview a variety of automatic layout generation tools, as well as the most recent advances in analog layout-aware circuit sizing. The discussion includes different methods for automatic placement (a template-based Placer and an optimization-based Placer), a fully-automatic Router and an empirical-based Parasitic Extractor. The concepts and algorithms of all the modules are thoroughly described, enabling readers to reproduce the methodologies, improve the quality of their designs, or use them as starting point for a new tool. All the methods described are applied to practical examples for a 130nm design process, as well as placement and routing benchmark sets.

The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

This book presents an innovative methodology for the automatic generation of analog integrated circuits (ICs) layout, based on template descriptions and on evolutionary computational techniques. A design automation tool, LAYGEN II was implemented to validate the proposed approach giving special emphasis to reusability of expert design knowledge and to efficiency on retargeting operations.

Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.

This book addresses the automatic sizing and layout of analog integrated circuits (ICs) using deep learning (DL) and artificial neural networks (ANN). It explores an innovative approach to automatic circuit sizing where ANNs learn patterns from previously optimized design solutions. In opposition to classical optimization-based sizing strategies, where computational intelligence techniques are used to iterate over the map from devices’ sizes to circuits’ performances provided by design equations or circuit simulations, ANNs are shown to be capable of solving analog IC sizing as a direct map from specifications to the devices’ sizes. Two separate ANN architectures are proposed: a Regression-only model and a Classification and Regression model. The goal of the Regression-only model is to learn design patterns from the studied circuits, using circuit’s performances as input features and devices’ sizes as target outputs. This model can size a circuit given its specifications for a single topology. The Classification and Regression model has the same capabilities of the previous model, but it can also select the most appropriate circuit topology and its respective sizing given the target specification. The proposed methodology was implemented and tested on two analog circuit topologies.

Integrated circuits are fundamental electronic components in biomedical, automotive and many other technical systems. A small, yet crucial part of a chip consists of analog circuitry. This part is still in large part designed by hand and therefore represents not only a bottleneck in the design flow, but also a permanent source of design errors responsible for re-designs, costly in terms of wasted test chips and in terms of lost time-to-market. Layout design is the step of the analog design flow with the least support by commercially available, computer-aided design tools. This book provides a survey of promising new approaches to automated, analog layout design, which have been described recently and are rapidly being adopted in industry.

Algorithms for VLSI Physical Design Automation, Second Edition is a core reference text for graduate students and CAD professionals. Based on the very successful First Edition, it provides a comprehensive treatment of the principles and algorithms of VLSI physical design, presenting the concepts and algorithms in an intuitive manner. Each chapter contains 3-4 algorithms that are discussed in detail. Additional algorithms are presented in a somewhat shorter format. References to advanced algorithms are presented at the end of each chapter. Algorithms for VLSI Physical Design Automation covers all aspects of physical design. In 1992, when the First Edition was published, the largest available microprocessor had one million transistors and was fabricated using three metal layers. Now we process with six metal layers, fabricating 15 million transistors on a chip. Designs are moving to the 500-700 MHz frequency goal. These stunning developments have significantly altered the VLSI field: over-the-cell routing and early floorplanning have come to occupy a central place in the physical design flow. This Second Edition introduces a realistic picture to the reader, exposing the concerns facing the VLSI industry, while maintaining the theoretical flavor of the First Edition. New material has been added to all chapters, new sections have been added to most chapters, and a few chapters have been completely rewritten. The textual material is supplemented and clarified by many helpful figures. Audience: An invaluable reference for professionals in layout, design automation and physical design.