An Introduction To Industrial Wastewater Collection And Treatment Engineering

Introductory technical guidance for civil engineers, environmental engineers, mechanical engineers, construction managers and wastewater treatment plant operators interested in industrial wastewater collection and treatment. Here is what is discussed: 1. OBJECTIVES 2. INDUSTRIAL POLLUTANTS 3. SOURCE CONTROL AND WASTE REDUCTION 4. WASTEWATER FLOWS AND CHARACTERISTICS 5. WASTEWATER COLLECTION 6. WASTEWATER TREATMENT 7. GUIDELINES FROM ACTUAL EXPERIENCE.

Introductory technical guidance for civil, environmental and mechanical engineers interested in industrial wastewater treatment and collection. Here is what is discussed: 1. OBJECTIVES 2. INDUSTRIAL POLLUTANTS 3. SOURCE CONTROL AND WASTE REDUCTION 4. WASTEWATER FLOWS AND CHARACTERISTICS 5. WASTEWATER COLLECTION 6. WASTEWATER TREATMENT 7. GUIDELINES FROM ACTUAL EXPERIENCE.

Introductory technical guidance for civil engineers, environmental engineers, mechanical engineers, construction managers and wastewater treatment plant operators interested in industrial wastewater collection and treatment. Here is what is discussed:1. OBJECTIVES2. INDUSTRIAL POLLUTANTS3. SOURCE CONTROL AND WASTE REDUCTION4. WASTEWATER FLOWS AND CHARACTERISTICS5. WASTEWATER COLLECTION6. WASTEWATER TREATMENT7. GUIDELINES FROM ACTUAL EXPERIENCE.

Introductory technical guidance for civil and environmental engineers and other professional engineers and construction managers interested in domestic water treatment and wastewater collection and treatment. Here is what is discussed: 1. ACTIVATED SLUDGE WASTEWATER TREATMENT PLANTS 2. ADVANCED WASTEWATER TREATMENT 3. AREA DRAINAGE SYSTEMS 4. DOMESTIC WASTEWATER TREATMENT 5. DOMESTIC WATER DISTRIBUTION 6. DOMESTIC WATER TREATMENT 7. HYDRAULIC DESIGN DATA FOR CULVERTS 8. HYDRAULIC DESIGN OF SEWERS 9. LOW IMPACT DEVELOPMENT 10. OILY WASTEWATER COLLECTION AND TREATMENT 11. DRAINAGE PIPE STRENGTH, COVER AND BEDDING 12. PRELIMINARY WASTEWATER TREATMENT 13. PRIMARY WASTEWATER TREATMENT 14. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 15. SLUDGE HANDLING, TREATMENT AND DISPOSAL 16. SMALL FLOW WASTE TREATMENT SYSTEMS 17. TREATED WATER STORAGE 18. WASTEWATER COLLECTION AND PUMPING.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in wastewater collection systems. Here is what is discussed: 1. GENERAL, 2. PRELIMINARY DESIGN CONSIDERATIONS, 3. HYDRAULIC DESIGN OF SEWERS, 4. SEWER SYSTEM LAYOUT AND APPURTENANCES, 5. STRUCTURAL DESIGN OF SEWERS, 6. PUMPING STATION AND EQUIPMENT, 7. PUMPING SYSTEM DESIGN,8. PIPING, 9. PUMPING STATION COMPONENTS, 10. EVALUATION OF EXISTING SEWER SYSTEMS, 11. REHABILITATION OF EXISTING SYSTEMS.

All industrial production processes generate waste waters, which can pollute water bodies into which they are discharged without adequate treatment. It is, therefore, essential to treat such wastes and eliminate their harmful effects on the environment. This book discusses sources, characteristics and treatment of waste waters produced in industries such as textiles, dairy, tanneries, pulp and paper, fertilizer, pesticide, organic and inorganic chemicals, engineering and fermentation. Many flow diagrams have been included to illustrate industrial processes and to indicate the sources of waste water in such processes. After describing treatment for individual factories, the author discusses the more advanced and economical common effluent plants. The text uses simple and straightforward language and makes the presentation attractive. This book should prove extremely useful to undergraduate students of civil and chemical engineering and postgraduate students of environmental science and engineering. Industrial design consultants will also find the book very handy. To the Greens, it may offer some of the solutions to their concerns.

Introductory technical guidance for civil engineers, environmental engineers, mechanical engineers and construction managers interested in wastewater collection and pumping. Here is what is discussed: 1. GENERAL, 2. PRELIMINARY DESIGN CONSIDERATIONS, 3. HYDRAULIC DESIGN OF SEWERS, 4. SEWER SYSTEM LAYOUT AND APPURTENANCES, 5. STRUCTURAL DESIGN OF SEWERS, 6. PUMPING STATION AND EQUIPMENT, 7. PUMPING SYSTEM DESIGN, 8. PIPING, 9. PUMPING STATION COMPONENTS, 10. EVALUATION OF EXISTING SEWER SYSTEMS, 11. REHABILITATION OF EXISTING SYSTEMS.

Introductory technical guidance for civil engineers, environmental engineers and other professional engineers and construction managers interested in industrial water treatment. Here is what is discussed: 1. CHEMICAL CLEANING OF INDUSTRIAL WATER SYSTEMS, 2. COOLING TOWER WATER TREATMENT, 3. MAKEUP WATER FOR INDUSTRIAL WATER SYSTEMS, 4. OILY WASTEWATER COLLECTION AND TREATMENT, 5. PRETREATMENT CONSIDERATIONS FOR WATER DESALINATION, 6. TREATMENT OF CLOSED INDUSTRIAL WATER SYSTEMS, 7. WATER SAMPLING AND TESTING, 8. TREATMENT OF STEAM BOILER WATER.

Introductory technical guidance for civil engineers, environmental engineers and construction managers interested in wastewater treatment. Here is what is discussed: 1. GENERAL, 2. SITE SELECTION, 3. TREATMENT REQUIREMENTS, 4. BASIC DESIGN CONSIDERATIONS.