An Introduction To Continuum Mechanics After Truesdell And Noll

This book provides a brief introduction to rational continuum mechanics in a form suitable for students of engineering, mathematics and science. The presentation is tightly focused on the simplest case of the classical mechanics of nonpolar materials, leaving aside the effects of internal structure, temperature and electromagnetism, and excluding other mathematical models, such as statistical mechanics, relativistic mechanics and quantum mechanics. Within the limitations of the simplest mechanical theory, the author had provided a text that is largely self-contained. Though the book is primarily an introduction to continuum mechanics, the lure and attraction inherent in the subject may also recommend the book as a vehicle by which the student can obtain a broader appreciation of certain important methods and results from classical and modern analysis.

A First Course in Rational Continuum Mechanics, Volume 1: General Concepts describes general concepts in rational continuum mechanics and covers topics ranging from bodies and forces to motions and energies, kinematics, and the stress tensor. Constitutive relations are also discussed, and some definitions and theorems of algebra, geometry, and calculus are included. Exercises and their solutions are given as well. Comprised of four chapters, this volume begins with an introduction to rational mechanics by focusing on the mathematical concepts of bodies, forces, motions, and energies. Systems that provide possible universes for mechanics are described. The next chapter explores kinematics, with emphasis on bodies, placements, and motions as well as other relevant concepts like local deformation and homogeneous transplacement. The book also considers the stress tensor and Cauchy's fundamental theorem before concluding with a discussion on constitutive relations. This monograph is designed for students taking a course in mathematics or physics.

This third edition includes the corrections made by the late C. Truesdell in his personal copy. It is annotated by S. Antman who describes the monograph`s genesis and the impact it has made on the modern development of mechanics. Originally published as Volume III/3 of the famous Encyclopedia of Physics in 1965, this book describes and summarizes "everything that was both known and worth knowing in the field at the time." It also has greatly contributed to the unification and standardization of the concepts, terms and notations in the field.

This overview of the development of continuum mechanics throughout the twentieth century is unique and ambitious. Utilizing a historical perspective, it combines an exposition on the technical progress made in the field and a marked interest in the role played by remarkable individuals and scientific schools and institutions on a rapidly evolving social background. It underlines the newly raised technical questions and their answers, and the ongoing reflections on the bases of continuum mechanics associated, or in competition, with other branches of the physical sciences, including thermodynamics. The emphasis is placed on the development of a more realistic modeling of deformable solids and the exploitation of new mathematical tools. The book presents a balanced appraisal of advances made in various parts of the world. The author contributes his technical expertise, personal recollections, and international experience to this general overview, which is very informative albeit concise.

This textbook on continuum mechanics reflects the modern view that scientists and engineers should be trained to think and work in multidisciplinary environments. The book is ideal for advanced undergraduate and beginning graduate students. The book features: derivations of the basic equations of mechanics in invariant (vector and tensor) form and specializations of the governing equations to various coordinate systems; numerous illustrative examples; chapter-end summaries; and exercise problems to test and extend the understanding of concepts presented.

This book addresses the basic concepts of continuum mechanics, that is, the classical field theory of deformable bodies. The theory is systematically developed, from the kinematics to the balance equations, the material theory, and the entropy principles. In turn, the linear-elastic solids, the ideal liquid and the Newtonian liquid are presented in detail as concrete applications. The book concludes by covering the theory of small motions in a medium with a finite prestress. In general, the emphasis is on presenting the content in a clear and straightforward way that requires only an elementary grasp of calculus, linear algebra, and Newtonian mechanics. The book is intended for students of physics, mechanics, engineering and the geosciences, as well as applied mathematics, with a year or more of college calculus behind them.

VISCOPLASTIC FLOW IN SOLIDS PRODUCED BYSHEAR BANDING A complete overview of the topic of viscoplastic flow in solids produced by shear banding This book presents novel ideas about inelastic deformation and failure of solids in a clear, concise manner. It exposes readers to information that will allow them to acquire the competence and ability to deal with up-to-date manufacturing and failure processes. It also portrays a new understanding of deformation processes. Finally, shear banding’s typical mechanism becomes the active cause of viscoplastic flow and not the ­passive effect. Viscoplastic Flow in Solids Produced by Shear Banding begins by discussing the new physical model of multilevel hierarchy and the evolution of micro-shear bands. In conclusion, it examines the difficulties of applying a direct multiscale integration scheme and extends the representative volume element (RVE) concept using the general theory of the singular surfaces of the microscopic velocity field sweeping out the RVE. This book reveals a new formulation of the shear strain rate generated by the consecutive systems of shear bands in the workflow integration approach. This book: Presents fresh ideas about inelastic deformation and failure of materials Provides readers with the ability to deal with up-to-date manufacturing and failure processes Sheds light on the interdisciplinary view of deformation processes in solids Viscoplastic Flow in Solids Produced by Shear Banding will appeal to researchers studying physical foundations of inelastic behaviour and failure of solid materials, dealing with analysis and numerical simulations of manufacturing forming processes. It is also an excellent resource for graduate and postgraduate students of material science and mechanical engineering faculties.

The lectures here reported were first delivered in August and September, 1965, for the Department of Mechanical and Aerospace Engi neering at syracuse University, New York under the sponsorship of the New York State Science and Technology Foundation. Lectures 1-6 and 22-23 are revised from a version prepared by Professor Kin N. Tong on the basis of a transcription of the lectures, kindly provided by Professor S. Eskinazi. The remainder of th~ text has been written out afresh from my own notes. Much of the same ground was covered in my lectures to the Austra lian Mathematical Society's Summer Research Institute at Melbourne in January and February, 1966, and for the parts affected the text conforms to this latter presentation. I am grateful to Professors C.-C. Wang and K. N. Tong for criticism of the manuscript. These lectures constitute a course, not a treatise. Names are attached to theorems justly, to the best of my knowledge, but are not intended to replace a history of the subject or references to the sources.