An Experimental And Analytical Study Of Heat Transfer And Pressure Drop In Horizontal Annular Two Phase Two Component Flow

The static pressure drop and both the local and average heat transfer coefficients were measured for the horizontal annular flow of water and air in a tube with an inside diameter of one inch. A correlation for the heat transfer coefficients was obtained. The pressure drop data agreed well with the Lockhart-Martinelli correlation and the prediction of the Wrobel-McManus wave roughness theory. A theory based on an axisymmetric model with no liquid entrainment was developed to allow predictions of local heat transfer coefficients. In comparing the predictions with the measured coefficients, 85% of the predictions were within plus or minus 60% of the measured values from horizontal flow and substantially better agreement resulted when the theory was modified empirically to take into account liquid entrainment and circumferential temperature variations. The theory was applied to conditions beyond the scope of the experimental program to predict the effects of varying heat flux, tube temperature, and tube diameter on the coefficients.

"Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"

The book provides design engineers an elemental understanding of the variables that influence pressure drop and heat transfer in plain and micro-fin tubes to thermal systems using liquid single-phase flow in different industrial applications. It also provides design engineers using gas-liquid, two-phase flow in different industrial applications the necessary fundamentals of the two-phase flow variables. The author and his colleagues were the first to determine experimentally the very important relationship between inlet geometry and transition. On the basis of their results, they developed practical and easy to use correlations for the isothermal and non-isothermal friction factor (pressure drop) and heat transfer coefficient (Nusselt number) in the transition region as well as the laminar and turbulent flow regions for different inlet configurations and fin geometry. This work presented herein provides the thermal systems design engineer the necessary design tools. The author further presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommends some of the well scrutinized modeling techniques.

Technical papers from the November 2000 ASME Heat Transfer Division congress and exposition comprise 31 sessions, including transport phenomena in fuel cell systems, radiation heat transfer in energy systems, heat transfer in microgravity systems, cryogenic heat transfer, innovative heat transfer vi

Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.