Adhesion And Adsorption Of Polymers

Honolulu is a most beautiful place, suitable for all occa sions. Its choice as the meeting site for the first Joint Chemical Congress between the American Chemical Society and the Chemical Society of Japan was praised by scientists from both sides. During this Congress, the International Conference on Adhesion and Adsorption of Polymers was held at the Hyatt Regency Hotel between April 2 and 5, 1979. We had speakers from ten nations presenting over forty papers related to the subject matter. It was a memorable event. Unlike our two previous adhesion symposia held in 1971 and 1975, this was the first time in the same conference that we discussed both adhesion and adsorption of polymers simultaneously. These two important phenomena are not only inter-related, but also equally important in adhesive technology as well as biochemical processes. The papers presented to this Conference deal with these two phenomena from both fundamental and practical viewpoints. Furthermore, with the advance of new surface analytical techniques, the actual, microscopic happenings at the interfaces can be pin pointed. Thus, characterization of interface became one of the major focuses of this Conference. As a result, a broad coverage of the subject matter includes statistical thermodynamics, surface physics, surface analysis, fracture mechanics, viscoelasticity, failure analysis, surface modification, adsorption kinetics, bio polymer adsorption, etc. Thanks to the diligence of our contri butors, we are now able to publish the final papers in these two volumes.

Current applications for bonding and sealing are expensive and time-consuming. Adhesion of Polymers presents a state-of-the-art method for improving bonds and sealing strength between different materials underwater and in the human body. This time- and cost-efficient technology will allow engineers to create or repair stronger seals in underwater pipes, repair ships at sea, even bond and seal tissues in the body.

Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references,exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion,and surface modifications. Emphasis is placed on physical concepts and mechanisms,using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical,mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource book.

This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm

The first ACS Adhesion Symposium was held in Washington, D.C., September 1971. During the four years since that meeting, much interest in adhesion has been generated among six divisions of the American Chemical Society. Then, in 1974, the Macromolecular Secretariat appointed me to work closely with the six Session chairmen in organizing this Symposium on Science and Technology of Adhesion. Needless to say, the success of the Symposium which took place between April 7 and 10, 1975 in Philadelphia, Pa., is due to their excellent cooperation and the enthusiastic response of con tributors. As originally planned, each division was responsible for one session, and most of the papers, including several late con tributions, are published in these two volumes of proceedings. During the Symposium, we held a banquet in honor of Professor Herman Mark in celebration of his eightieth birthday. His Plenary Lecture and the Symposium Address by Professor Murray Goodman are published in full at the beginning of the first volume. I thank Professors Mark and Goodman for their excellent presentations on this memorable occasion.

This book presents the analysis of up-to-date techniques used for the determination of acid-base properties in view of their applicability to examination of solid organic and inorganic surfaces. The studies have been carried out by the authors since 1993, showing experimental data on surface properties of more than 150 polymers, such as carbocatena

Physics of Polymer Surfaces and Interfaces emphasizes current theoretical ideas and modern experimental tools for characterizing the physical properties of polymer surfaces and interfaces. Foremost are their important roles in polymer technology throughthe processes of wetting, adhesion, adsorption, and through their effect on the kinetics of phase separation and mechanical mixing of molten polymers. Each of the 14 chapters in this book stands as a 'mini-review' of a specific subject. This up-to-date compendium of the most significant theoretical and experimental works provides a scientific understanding of the physics of polymer interfaces and surfaces and will aid scientists in planning and interpreting new results.

The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the

The main topics of this book are fillers, their interface with polymers, composites, blends, and alloys. Treatment of the subject is fundamentally based on principles of surface phenomena, physico-chemical theory of filling, theory of adsorption, surface adhesion, etc.