A Short Course In Soil And Rock Slope Engineering

This work comprehensively treats soil & rock slope engineering in one volume. It focuses on getting the fundamentals right, explaining simple methods of stability analysis, and applying them to a wide range of practical applications.

Although there are now a large number of computer programmes for solving all sorts of foundation design problems, the need to check these outputs by 'hand-calculation' has become vitally important. This book concentrates on getting the fundamentals right and then using them in practical applications. The book is illustrated with numerous worked examples and with quick-reference tables and charts. In this new edition, the original highly acclaimed text has been extended and updated and now includes major new sections on short term and long term stability, critical state interpretation of peak strength, seismic methods for measuring ground stiffness in situ, and offshore pile design: total stress and effective stress approaches.A

Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.

The stability of rock slopes is an important issue in both civil and mining engineering. On civil projects, rock cuts must be safe from rock falls and large-scale slope instability during both construction and operation. In open pit mining, where slope heights can be many hundreds of meters, the economics of the operation are closely related to the steepest stable slope angle that can be mined. This extensively updated version of the classic text, Rock Slope Engineering by Hoek and Bray, deals comprehensively with the investigation, design and operation of rock slopes. Investigation methods include the collection and interpretation of geological and groundwater data, and determination of rock strength properties, including the Hoek Brown rock mass strength criterion. Slope design methods include the theoretical basis for the design of plane, wedge, circular and toppling failures, and design charts are provided to enable rapid checks of stability to be carried out. New material contained in this book includes the latest developments in earthquake engineering related to slope stability, probabilistic analysis, numerical analysis, blasting, slope movement monitoring and stabilization methods. The types of stabilization include rock anchors, shotcrete, drainage and scaling, as well as rock fall protecting methods involving barriers, ditches, nets and sheds. Rock Slopes: Civil and Mining Engineering contains both worked examples illustrating data interpretation and design methods, and chapters on civil and mining case studies. The case studies demonstrate the application of design methods to the construction of stable slopes in a wide variety of geological conditions. The book provides over 300 carefully selected references for those who wish to study the subject in greater detail. It also includes an introduction by Dr. Evert Hoek.

Provides a complete guide to the study, design, construction and management of landslide and slope engineering measures for mountain roads, with emphasis on low-cost. The geographical focus is on the tropics and sub-tropics, but is also highly relevant to other regions where heavy rain, steep slopes and weak soils and rocks combine to create slope instability. The causes and mechanisms of landslides are described, and the hazards they pose to mountain roads are illustrated. Methods of desk study, field mapping and ground investigation are reviewed and illustrated, with emphasis on geomorphological and engineering geological techniques. The design and construction of alignments, earthworks, drainage, retaining structures, the stabilization of soil slopes and rock slopes, and the control of erosion on slopes and in streams covered. Slope management as part of road maintenance and operation is reviewed, and procedures for risk assessment and works prioritization are described.

This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical

Every engineering structure, whether it's a building, bridge or road, is affected by the ground on which it is built. Geology is of fundamental importance when deciding on the location and design of all engineering works, and it is essential that engineers have a basic knowledge of the subject. Engineering Geology introduces the fundamentals of the discipline and ensures that engineers have a clear understanding of the processes at work, and how they will impact on what is to be built. Core areas such as stratigraphy, rock types, structures and geological processes are explained, and put in context. The basics of soil mechanics and the links between groundwater conditions and underlying geology are introduced. As well as the theoretical knowledge necessary, Professor Bell introduces the techniques that engineers will need to learn about and understand the geological conditions in which they intend to build. Site investigation techniques are detailed, and the risks and risk avoidance methods for dealing with different conditions are explained. Accessible introduction to geology for engineers Key points illustrated with diagrams and photographs Teaches the impact of geology on the planning and design of structures

Folded card: Identification and description of soils; and, Identification and description of rocks / designed by Environmental Services Group Limited 2007 in accordance with BS EN ISO 14689-1 and BS EN ISO 14688-1 respectively; and designed to be taken into the field during the walk-over survey.